200mm Digital Precision Caliper Swiss Digital Display 0.01mm Resolution IP67, Self‑Lubricating - Microtech Metrology
€349.00
Product information "200mm Digital Precision Caliper Swiss Digital Display 0.01mm Resolution IP67, Self‑Lubricating - Microtech Metrology"
Take advantage of precise workshop measurement with robust protection and clear digital readout; the combination of IP67 dust and water resistance, 0–200 mm measuring range, and ±0.03 mm accuracy supports reliable quality control and uninterrupted production. Order directly via Metav Werkzeuge or consult our specialists for specification matching and prompt supply.
Caliper — digital caliper with Swiss Digital display and IP67 protection by Microtech Metrology
The Caliper is a compact digital measuring instrument designed for general workshop and quality-control applications, featuring a clear Swiss Digital 11 mm display and a 0–200 mm measuring range for standard measurement tasks.
- Swiss Digital 11 mm display, high readability
- Measuring range 0–200 mm for standard tasks
- IP67 protection for dust and water resistance
- Resolution 0.01 mm with 0.03 mm accuracy
- Self-lubricating slide for smooth operation
Dependable accuracy for everyday quality control
This digital measuring gauge delivers consistent readings thanks to a 0.01 mm resolution combined with a stated accuracy of ±0.03 mm, which aligns with industry expectations for calipers in the standard class. The instrument suits routine inspection, setup and maintenance work where reproducible dimensional checks are required. The relatively compact 0–200 mm span places the tool in the Standard category, offering the best compromise between reach and rigidity for general machining and metalwork tasks. Clear numerical results on the Swiss Digital display reduce interpretation errors and speed up decision-making on the shop floor.
Engineered for harsh workshop environments
Built with a sealed design to IP67 standards, the unit withstands ingress of dust and temporary immersion, making it resilient where coolant mist or fine particles are present. The self‑lubricating slide reduces friction and wear, maintaining smooth jaw travel and stable measurement feel over extended use; this lowers the need for frequent maintenance and keeps measurement uncertainty low. A 43 mm jaw length provides secure contact on typical external and internal features while remaining easy to manoeuvre in confined setups. These characteristics translate into greater uptime and fewer repeat measurements in daily production routines.
Simple handling and practical integration
Operation is deliberately straightforward: large numerals on the 11 mm high Swiss Digital display aid rapid reading, while the compact form supports single‑hand control during setup. The instrument is a practical alternative to dial or analogue gauges where digital readout speed matters, yet no complex data-output interface is required for many bench tasks. For workshops looking to streamline their tool set, this digital caliper offers clear measurement results and robust construction without unnecessary connectivity complexity, making it a solid choice for entry into modern, reliable metrology at the bench.
For ordering or technical matching, contact Metav Werkzeuge in Emmerich — our consultants will advise on fit and delivery for the Microtech Metrology caliper (SKU 141430203)
Technical data
- Article number: 141430203
- GTIN: 4061905037795
- Manufacturer: Microtech Metrology
Facts
- Measuring range: 0–200 mm
- Resolution: 0.01 mm
- Accuracy: ±0.03 mm
- Display height: 11 mm
- Jaw length: 43 mm
- Protection class: IP67
Special features
- Digital display: Swiss Digital
- Self-lubricating slide
- Digital instrument (battery powered)
- Category: Standard caliper (measuring range up to 300 mm)
FAQ
What measuring range does this caliper cover?
The instrument covers a 0–200 mm span, classifying it in the Standard range suited to most workshop and machine‑shop checks.
What resolution and accuracy are offered?
Resolution is 0.01 mm and stated accuracy is ±0.03 mm, which supports reliable routine quality control with clear digital readout.
Is the device suitable for humid or dusty environments?
Yes — the unit is rated IP67, providing protection against dust ingress and temporary immersion, suitable for many workshop conditions.
How readable is the display in normal workshop lighting?
The Swiss Digital 11 mm display delivers large, high‑contrast digits for immediate legibility during fast inspection and setup tasks.
What is the jaw length and how does that affect handling?
The jaws are 43 mm long, offering a balance between secure part contact and ease of handling for typical external and internal measurements.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.