160mm Digital Caliper For Bore Spacing With 11mm Display, IP54, ISO 17025 Calibrated - Microtech Metrology
€269.00
Product information "160mm Digital Caliper For Bore Spacing With 11mm Display, IP54, ISO 17025 Calibrated - Microtech Metrology"
Benefit from traceable calibration, robust protection and USB data output for faster, reproducible bore-distance measurements; this combination reduces rework and speeds quality checks. Take advantage of the ISO 17025 calibration, IP54 dust protection and the 10–160 mm measuring range. Order the digital caliper directly via Metav Werkzeuge or ask our consultants if needed.
Microtech Metrology Digital Caliper – ISO 17025 calibrated, USB output
The Microtech Metrology digital caliper designed for precise measurement of bore distances in workshop and production environments, featuring a clear digital readout and data interface for seamless documentation.
- ISO 17025 calibration included
- USB data output for traceable records
- IP54 protection for workshop use
- Hand-finished measuring jaws
Traceable calibration and consistent measurement quality
A caliper with an ISO 17025 calibration certificate delivers documented traceability that matters in quality control and incoming inspection. The device’s ±0.03 mm stated accuracy together with a 0.01 mm display increment provides a reliable basis for pass/fail decisions and acceptance tests. Having the calibration certificate included means measurement results can be archived and audited without additional calibration steps, reducing downtime and administrative effort.
Robust workshop performance and data workflow integration
Built for daily use at the bench, this instrument combines IP54 ingress protection with a large, easy-to-read digital display (height 11 mm) and USB data output for direct transfer into quality-management systems. The dust-resistant construction and clear readout reduce reading errors and the risk of contamination-driven faults, while the USB interface streamlines data capture for statistical process control or documentation, increasing throughput and lowering manual transcription errors.
Practical handling and accessories for bore-distance tasks
With a measuring range of 10–160 mm, this tool fits the Standard class for general machine‑shop and metalworking tasks, offering a practical balance of reach and rigidity. Hand-finished jaws ensure consistent contact geometry for repeatable readings, and the supplied measuring cones (Ø20 mm and Ø35 mm) simplify accurate bore-distance setups. These features reduce setup time and make the instrument suitable for routine checks on fixtures, housings and bores without sacrificing ease of use.
Contact Metav Werkzeuge for expert advice on selecting the right Microtech Metrology digital caliper, request the ISO 17025 certificate or arrange prompt delivery from Emmerich
Technical data
- Article number: 141730151
- GTIN: 4061905036347
- Brand: Microtech Metrology
- Category: digital calipers
Numbers / Core technical data
- Measuring range: 10–160 mm
- Resolution (display): 0.01 mm
- Stated accuracy: ±0.03 mm
- Digital display height: 11 mm
- Protection class: IP54
Special features
- ISO 17025 calibration and certificate included
- USB data output
- Hand-finished measuring jaws
- Accessories included: measuring cones Ø20 mm and Ø35 mm
- Digital instrument for bore-distance measurement
FAQ
Is the caliper delivered with an official calibration certificate?
Yes. The Microtech Metrology digital caliper is supplied calibrated to ISO 17025 and includes the calibration certificate for documentation and traceability.
What is the usable measuring range and classification of the instrument?
The instrument offers a 10–160 mm measuring range, placing it in the Standard class, which is ideal for everyday machine‑shop and metalworking measurement tasks.
How accurate are the readings and what is the display resolution?
Readings are stated at ±0.03 mm with a display resolution of 0.01 mm, suitable for standard quality-control and workshop inspections.
Can measurement data be exported directly to a computer?
Yes. The device provides a USB data output for direct transfer of measurements into spreadsheets or quality‑management software.
Are there accessories included for bore measurements?
The delivery includes measuring cones Ø20 mm and Ø35 mm, which facilitate precise bore-distance setups and reduce preparation time.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools