160mm Digital Precision Caliper For Bore Centres, Swiss Digital 11mm Display, IP67, ISO 17025 Calibrated - Microtech Metrology
€389.00
Product information "160mm Digital Precision Caliper For Bore Centres, Swiss Digital 11mm Display, IP67, ISO 17025 Calibrated - Microtech Metrology"
Take advantage of precise measurement, robust protection and an included ISO 17025 calibration certificate to streamline quality control and reduce rework. Order the digital caliper directly via Metav Werkzeuge or ask our consultants if needed.
Digital Caliper (10–160 mm) by Microtech Metrology — IP67, ISO 17025 calibrated
Digital Caliper (10–160 mm) is a workshop-ready precision instrument for machine and metalworking measurement tasks, featuring a Swiss digital display and dust‑ and water‑resistant construction.
High-contrast Swiss digital display 11 mm
Measurement range 10–160 mm
IP67 dust and water protection
Delivered calibrated to ISO 17025
Accurate measurements backed by accredited calibration
The instrument delivers a 0.01 mm display resolution on a Swiss digital display (height 11 mm), which supports fast, repeatable readings on the shop floor and inspection bench. Supplied fully calibrated to ISO 17025, a traceable calibration certificate accompanies each unit, which reduces uncertainty in quality control processes and simplifies documentation for audits. This certified calibration is particularly valuable where measurement traceability and documented compliance are required.
Robust design for everyday workshop use
Designed for the typical needs of machining and metalworking, this caliper covers the 10–160 mm range—classified as Standard—so it balances reach with rigidity for frequent one‑hand measurements. The housing and slide are engineered to withstand workshop conditions; the instrument is IP67 rated for protection against dust and temporary immersion, and lubricated components reduce maintenance. Hand‑finished measuring jaws ensure precise contact geometry while the self‑lubricating slide enhances long‑term smoothness and repeatability.
Faster inspection, fewer rejects
Consistent readings and accredited calibration accelerate inspection cycles and support inline quality control. The clear digital readout minimises interpretation errors and the ergonomic slide enables quick checks of shafts, bore centres and part steps. Where production throughput and first‑pass yield matter, the combination of readable display, robust protection and factory calibration helps reduce rework and keeps assembly and machining processes on schedule.
Built to perform in demanding environments
The tool was conceived for regular workshop use: sturdy jaw surfaces, a resilient slide mechanism and splash protection make it suitable for busy benches and light production lines. The precise display and factory finishing provide confidence when measuring small tolerances, while the ISO 17025 certificate documents that the caliper meets formal accuracy requirements. For teams upgrading measurement routines, this instrument offers a pragmatic balance of durability and traceable precision.
For certified delivery and detailed technical advice about the Microtech Metrology digital caliper, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to discuss specifications and calibration documentation
Technical Data
- Article number: 141730153
- GTIN: 4061905036774
- Manufacturer: Microtech Metrology
- SKU: 141730153
Facts
- Measurement range: 10–160 mm
- Resolution / reading: 0.01 mm
- Display: Swiss Digital, height 11 mm
- Protection class: IP67
- Calibration: ISO 17025 certificate included
Special features
- Hand‑finished measuring jaws
- Self‑lubricating slide
- Digital caliper design
- Standard class measurement range (10–160 mm)
FAQ
What measurement range does the caliper cover?
The digital caliper covers a range of 10–160 mm, making it suitable for standard workshop and machine‑shop tasks (SKU 141730153).
Is an official calibration certificate supplied?
Yes, the caliper is delivered with a full ISO 17025 calibration certificate issued for the Microtech Metrology digital caliper.
How resistant is the instrument to dust and liquids?
The unit is rated IP67, which protects against dust ingress and temporary immersion, suitable for harsh workshop environments.
What display resolution can be expected?
The Swiss digital display provides a 0.01 mm resolution for rapid and precise readings.
Are the measuring jaws finished for accuracy?
The measuring jaws are hand‑finished, providing precise contact geometry to support repeatable measurements.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.