1020mm Digital Precision Caliper With Bore Gauge Tips, IP67, ISO 17025 Calibrated - Microtech Metrology
€1,589.00
Product information "1020mm Digital Precision Caliper With Bore Gauge Tips, IP67, ISO 17025 Calibrated - Microtech Metrology"
Take advantage of the long measuring range, rugged IP67 protection and traceable factory calibration to maintain consistent, repeatable measurements on large components; the included measuring cones extend bore-measurement capability for flexible inspection. Order the digital caliper directly via Metav Werkzeuge or ask the consultants for specification support.
Digital Caliper — Microtech Metrology, 20–1,020 mm range, IP67 protection
A digital caliper built for long-range workshop measurement and heavy-duty component inspection, combining a high-visibility Swiss Digit display with factory ISO 17025 calibration for immediate, traceable use
- Wide 20–1,020 mm measuring range
- IP67 protection for harsh environments
- ISO 17025 calibrated with certificate
- Swiss Digit 11 mm display for clear readings
Long-range measurement where stiffness matters
With a measuring span of 20–1,020 mm, this instrument addresses the demands of larger assemblies where reach and structural rigidity are required. The extended range places the caliper in the long‑range category for workshop metrology, offering a practical compromise between handling and span so that measurements across sizeable fixtures, housings or shafts remain reproducible. The generous Swiss Digit height ensures readouts remain legible on the shop floor, reducing interpretation time and speeding inspection cycles.
Accurate, repeatable digital readings for production use
The instrument delivers a display resolution of 0.01 mm and an accuracy of ±0.04 mm, values that align with routine quality control in fabrication and heavy machining environments. The electronic system stabilises readings and reduces parallax errors common to analogue devices; this supports faster decision-making in-process and fewer reworks. The IP67 rating protects electronics from dust ingress and brief immersion, so the tool sustains performance even in demanding production or on-site situations.
Traceable calibration and practical accessories for bore work
Supplied fully calibrated to ISO 17025, the caliper is delivered with a calibration certificate enabling immediate use in regulated workflows and easier documentation during audits. Two measuring cones are included (Ø20 mm and Ø35 mm), expanding the instrument’s function to reliable bore-centre and pitch measurements without additional adapters. The combination of traceable calibration and tailored accessories streamlines first‑article inspection and short-run batch checks.
For traceable long-range measurement and robust shop-floor performance choose the Microtech Metrology digital caliper — contact Metav Werkzeuge for supply and application advice from Emmerich.
Technical data
- Article number: 141731013
- GTIN: 4061905452550
- Brand: Microtech Metrology
- Measuring range: 20–1,020 mm
- IP rating: IP 67
- Display: Swiss Digit, 11 mm height
- Resolution: 0.01 mm
- Accuracy: ±0.04 mm
- ISO 17025 calibration: Yes, certificate included
- Measuring cones included: Ø20 mm and Ø35 mm
Facts
- Type: Digital caliper
- Categories: Digital measuring instruments; digital calipers
- ECLASS: 21170344
Special features
- Dust and water protection suitable for harsh environments
- Long-range design for larger components
- Factory calibration with traceable documentation
FAQ
How does the calibration certificate support production control?
The calibration certificate supplied with the Microtech Metrology digital caliper documents traceability to ISO 17025, enabling the instrument to be used immediately in quality plans and audit trails without extra calibration downtime.
Can the caliper be used in wet or dusty workshop conditions?
Yes, the caliper’s IP67 rating means the electronic unit is protected against dust ingress and temporary immersion, making it suitable for challenging shop-floor environments.
Are there accessories for measuring bores and hole centres?
The delivery includes measuring cones Ø20 mm and Ø35 mm, allowing the caliper to perform bore and pitch measurements without additional adapters.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.