1520mm Digital Precision Caliper For Bore Spacing With Ø20/Ø35 Probes, IP67, ISO 17025 Calibrated - Microtech Metrology
€2,400.00
Product information "1520mm Digital Precision Caliper For Bore Spacing With Ø20/Ø35 Probes, IP67, ISO 17025 Calibrated - Microtech Metrology"
Take advantage of ISO 17025 traceability, the extended 20–1520 mm measuring range and IP67 protection for dependable large‑format measurements; order the calibrated instrument directly via Metav Werkzeuge or consult our specialists for application advice.
Precision Caliper 20–1520 mm (Digital, IP67) — Microtech Metrology
The Precision Caliper from Microtech Metrology is a long‑reach, ISO‑calibrated digital measuring instrument designed for accurate inspection of large components and workshop assemblies.
- ISO 17025-calibrated with certificate
- Measurement range 20–1520 mm
- IP67-rated for dust and water protection
- Swiss Digit display, 11 mm height
- Supplied with Ø20 mm and Ø35 mm cones
Traceable accuracy that supports quality control
The instrument is delivered fully calibrated according to ISO 17025, including a calibration certificate, which ensures measurable traceability for audit‑ready inspection routines. With a stated accuracy of 0.05 mm and a standard display resolution of 0.01 mm, the caliper provides the reproducible results required for production control and incoming inspection. This combination of certified calibration and repeatable resolution reduces uncertainty in acceptance decisions and documentation.
Extended reach for large assemblies and fixtures
Built for measurements up to 20–1520 mm, this long‑range solution covers large workpieces without resorting to multiple tools. The elongated beam balances reach with stiffness to keep deflection and measurement error low across the span, making it suitable for fixtures, housings and larger machined parts. Supplied Ø20 mm and Ø35 mm measuring cones facilitate bore‑centre and distance measurements, converting the caliper into a versatile instrument for both external and specialised internal tasks.
Robust construction and clear readout for everyday use
Designed for workshop environments, the caliper carries an IP67 rating that guards internal electronics from dust ingress and temporary immersion. The Swiss Digit display (11 mm character height) delivers high‑contrast numerals that speed up readings and reduce transcription errors on the shop floor. The compact electronic package and sealed Slides ensure that the device remains durable under frequent use while keeping handling intuitive for operators with varying levels of metrology experience.
Streamlined workflow integration and practical benefits
Integration into inspection routines is straightforward: the instrument’s certified status supports traceable records, while the rugged design and easy‑to‑read display shorten inspection cycles and lower rework rates. For quality engineers and workshop supervisors, the caliper represents an efficient way to combine large measurement capability with laboratory‑grade calibration—supporting consistent production quality and fewer measurement‑related stoppages.
For tailored measurement advice or to request the ISO 17025‑calibrated Precision Caliper, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930
Technical data
- Article number: 141731513
- GTIN: 4061905452567
- Manufacturer: Microtech Metrology
- ECLASS: 21170344
Facts
- Measuring range: 20–1520 mm
- Resolution (reading): 0.01 mm
- Accuracy: 0.05 mm
- Display: Swiss Digit, character height 11 mm
- Protection rating: IP67
Special features
- ISO 17025 calibration with certificate
- Supplied with measuring cones Ø20 mm and Ø35 mm
- Long‑range caliper suitable for large components
- Digital readout for fast measurement capture
- Rugged, workshop‑ready construction
FAQ
Is the caliper supplied with a calibration certificate?
Yes. The Precision Caliper from Microtech Metrology is delivered fully calibrated according to ISO 17025 and includes the corresponding calibration certificate.
What measurement range does the instrument cover?
The instrument measures from 20 mm to 1520 mm, classifying it as a long‑range caliper suitable for larger assemblies and fixtures.
What accuracy and resolution can be expected?
Declared accuracy is 0.05 mm with a display resolution of 0.01 mm, providing repeatable readings for standard workshop and production control tasks.
Can the caliper be used in harsh workshop conditions?
Yes. The device has an IP67 rating for dust and temporary immersion protection, making it robust enough for demanding workshop environments.
Which accessories are included for special measurements?
The delivery includes measuring cones Ø20 mm and Ø35 mm, enabling bore‑centre and specialised internal measurements.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.