2020mm Digital Precision Caliper For Bore Centre Distances With Ø20/Ø35 Cones, IP67, ISO 17025 Calibrated - Microtech Metrology
€3,339.00
Product information "2020mm Digital Precision Caliper For Bore Centre Distances With Ø20/Ø35 Cones, IP67, ISO 17025 Calibrated - Microtech Metrology"
The combination of an extra‑long 20–2020 mm measuring range, robust IP67 protection and ISO 17025 calibration certificate makes this instrument a reliable choice for large‑format measurement tasks; order directly via Metav Werkzeuge or consult our specialists for specification matching.
Microtech Metrology digital caliper — 20–2020 mm, IP67 protection
The digital caliper from Microtech Metrology is a long‑range measuring instrument designed for large components and workshop environments, combining wide reach with shop‑floor durability and traceable calibration
- ISO 17025 calibrated with certificate included
- Measurement range 20–2020 mm for large parts
- IP67 dust and water protection for harsh environments
- Swiss Digit display, 11 mm digit height for high legibility
Traceable accuracy for large components
Designed for applications where repeatable, documented measurements matter, this instrument is delivered fully ISO 17025 calibrated with a calibration certificate, providing traceability for quality control and auditing. The device reads in steps of 0.01 mm while the specified accuracy is ±0.06 mm, so it is especially suited to workshop and production inspection tasks where long travel and documented conformity are priorities rather than sub‑micron laboratory measurement. The 20–2020 mm span places the caliper in the extra‑long category, allowing measurements of housings, fixtures and large assemblies without transfer errors from multiple shorter instruments.
Built for the workshop — robust, visible, reliable
A tough design with IP67 ingress protection keeps the electronics and sliding system operational in coolant, chips and dusty conditions, reducing downtime for routine cleaning. The Swiss Digit display with an 11 mm digit height ensures quick, unambiguous readouts on the shop floor, which speeds up inspection cycles and reduces transcription errors. The digital electronics and clear numerals support rapid decision‑making, improving throughput in measuring stations and incoming inspection while maintaining documented measurement integrity.
Practical handling and accessories that save time
The instrument comes supplied with two measuring cones (Ø20 mm and Ø35 mm) to simplify bore and depth checks on large diameters, eliminating the need for improvised adapters. The long hardened beam maintains sufficient stiffness across its travel to keep deflection low; combined with the device’s calibration, this reduces measurement uncertainty for long‑span checks. Metav’s distribution and quality filter in Emmerich ensure consistent availability and a verified quality level, reflecting a commitment to making precision tools accessible across industry and trade.
For ISO 17025‑traceable measurements with the Microtech Metrology digital caliper, contact Metav Werkzeuge in Emmerich for delivery options and specification advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930
Technical data
- Article number: 141732013
- GTIN: 4061905452574
- Manufacturer: Microtech Metrology
Core technical data
- Measurement range: 20–2020 mm
- Maximum measuring length: 2020 mm
- Resolution: 0.01 mm
- Stated accuracy: ±0.06 mm
- Display: Swiss Digit, 11 mm digit height
- Protection class: IP67
Special features
- Delivered calibrated to ISO 17025 with certificate
- Digital operation for rapid readout and recording
- Includes measuring cones Ø20 mm and Ø35 mm
- Long‑range design suitable for large components and assemblies
FAQ
What measurement range does the caliper cover?
The Microtech Metrology digital caliper covers a measuring range of 20–2020 mm, enabling direct inspection of large parts without the need to piece measurements together.
Is the instrument delivered calibrated?
Yes. The digital caliper from Microtech Metrology is supplied fully calibrated to ISO 17025 and includes the calibration certificate with delivery.
What resolution and accuracy can be expected?
The instrument provides a resolution of 0.01 mm with a stated accuracy of ±0.06 mm, suitable for production and workshop inspection of large components.
Which environments is the caliper suited for?
With IP67 protection, the caliper is appropriate for shop‑floor conditions involving coolant splashes, chips or dust, while the robust beam supports repeatable long‑span measurements.
What accessories are included for specific measurements?
The delivery includes measuring cones Ø20 mm and Ø35 mm, allowing simplified bore and depth checks on larger diameters without separate adapters.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.