150mm Digital Precision Caliper Swiss Digit Readout, IP67, ISO 17025 Calibrated - Microtech Metrology
€369.00
Product information "150mm Digital Precision Caliper Swiss Digit Readout, IP67, ISO 17025 Calibrated - Microtech Metrology"
The combination of ISO 17025 calibration, IP67 protection and a clear Swiss Digit display delivers traceable, workshop-ready measurements for everyday quality control. Order the calibrated instrument directly via Metav Werkzeuge or consult our specialists for application advice.
Digital Precision Caliper — IP67, ISO 17025‑calibrated 0–150 mm by Microtech Metrology
The Digital Precision Caliper is a compact, workshop-grade measuring instrument for standard 0–150 mm tasks, suited to machine shops and quality control stations.
- IP67 dust- and water-resistant
- ISO 17025 calibrated with certificate
- Swiss Digit display, 11 mm digit height
- 0–150 mm measurement range
Traceable accuracy for dependable production control
A fully documented calibration to ISO 17025 ensures that measured values are traceable and auditable, which is essential for production control and incoming inspection. The instrument offers ±0.03 mm accuracy and a 0.01 mm resolution, matching typical industrial tolerance chains for standard caliper tasks. Classified in the standard workshop range, the caliper balances reach and stiffness for frequent use at 150 mm, reducing rework and increasing the reliability of pass/fail decisions in serial production.
Robust design for demanding workshop environments
Designed for everyday shop use, the caliper features an IP67 rating that protects against dust ingress and short-term immersion, allowing measurements at dirty machine benches or near coolant. The Swiss Digit display with 11 mm high digits improves readability under workshop lighting, speeding up inspections and reducing entry errors. The offset jaw geometry with 110/40 mm jaw lengths supports stable external and internal measurements on small assemblies while maintaining comfortable handling.
Practical operation that speeds inspection routines
Operation is straightforward: the digital readout and tactile slider save time during repetitive checks, while the instrument’s form factor supports one-handed use. The resolution and accuracy combination is suitable for quality assurance in metalworking, toolmaking and fixture inspection. Delivered with a traceable calibration certificate, this instrument integrates easily into documented quality systems and reduces administrative effort when proving measurement capability during audits.
For guaranteed traceability and workshop durability, contact Metav Werkzeuge in Emmerich for personalised advice and ISO 17025‑calibrated measuring instruments — email info@metav-werkzeuge.com or call +49 2822 7131930
Technical data
- Article number: 141740153
- GTIN: 4061905457395
- Brand: Microtech Metrology
- eClass: 21170344
Facts
- Measurement range: 0–150 mm
- Resolution: 0.01 mm
- Accuracy: 0.03 mm
- Display height: 11 mm
- Jaw length: 110 / 40 mm
- Protection class: IP 67
Special features
- Digital caliper with Swiss Digit display
- Delivered fully calibrated to ISO 17025 with certificate
- Compact, standard workshop range
- Suited for machine shop and quality control use
FAQ
What level of accuracy can be expected from this caliper?
The caliper from Microtech Metrology provides an accuracy of ±0.03 mm with a resolution of 0.01 mm, suitable for standard workshop measurements and quality checks (SKU 141740153).
Is the instrument ready to use for calibrated inspections?
Yes — the instrument is delivered fully calibrated to ISO 17025 and includes a calibration certificate for immediate use in documented inspection routines.
Can the caliper be used at a machine bench or in damp conditions?
With IP67 protection, the caliper tolerates dusty environments and temporary immersion, making it appropriate for workshop floors and near-coolant areas.
How readable is the display in workshop lighting?
The Swiss Digit display has 11 mm high characters for clear visibility under typical workshop illumination, reducing reading errors during rapid inspection cycles.
Which industries and tasks is the caliper best suited for?
This digital caliper is ideal for machine shops, toolrooms and quality departments requiring reliable 0–150 mm checks, incoming inspection and routine production control.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.