300mm Digital Precision Caliper Swiss Digit Display 0.01mm Resolution IP67, ISO 17025 Calibrated - Microtech Metrology
€469.00
Product information "300mm Digital Precision Caliper Swiss Digit Display 0.01mm Resolution IP67, ISO 17025 Calibrated - Microtech Metrology"
Combine workshop-grade robustness with laboratory-level traceability: IP67 protection, ISO 17025 calibration and a clear Swiss Digit display ensure repeatable results across the 0–300 mm range; benefit from fast readings and assured accuracy by ordering through Metav Werkzeuge or by contacting their consultants for tailored support.
Digital Caliper (0–300 mm) by Microtech Metrology — IP67, ISO 17025 calibrated
The Digital Caliper is a rugged, high‑precision measuring instrument for workshop and inspection tasks, offering a 0–300 mm measuring range and an easy-to-read Swiss Digit display for quick, reliable dimensional checks.
- IP67 protection for wet and dusty environments
- ISO 17025 calibration certificate included
- Swiss Digit display with 11 mm digits
- Measuring range 0–300 mm with offset jaws 130/60
Reliable accuracy and certified traceability for inspection use
The instrument provides reproducible measurement results thanks to a combination of a robust mechanical design and laboratory calibration. With a resolution of 0.01 mm and a stated accuracy of ±0.04 mm, this caliper bridges routine workshop checks and quality-control tasks. The delivery includes an ISO 17025 calibration certificate, which documents traceability and acceptance criteria; this makes the tool suitable for incoming inspection and production control where documented evidence of calibration is required. Emphasis on measurable values supports faster decisions on part conformity and reduces rework.
Built for harsh environments and daily workshop handling
Designed to withstand demanding conditions, the gauge carries an IP67 rating that protects the electronics from dust and temporary immersion. The housing and slider geometry are optimised for repeatable alignment and reduced dirt ingress, while the shifted measuring jaws (130/60 mm) extend accessibility for deeper features and offset measurements. These design choices translate into fewer measurement interruptions and lower downtime, improving throughput on the shop floor without sacrificing precision.
Clear readout and ergonomic use to speed up routines
The Swiss Digit display with 11 mm high digits offers fast legibility across the bench, reducing reading errors and fatigue during repetitive checks. The digital electronics deliver instantaneous readings with stable indication, and the intuitive control layout keeps cycle time low for serial checks. Compact slider geometry and balanced weight distribution support smooth one‑hand operation, making the instrument a practical choice for machinists, toolmakers and inspection staff who require both speed and documented accuracy.
For documented precision and purchasing advice, contact Metav Werkzeuge for a product consultation or specification check and discover how this calibrated caliper fits into your metrology setup
Technical Data
- Article number: 141740303
- GTIN: 4061905457401
- ECLASS: 21170344
- Brand: Microtech Metrology
- Digital display: Swiss Digit, 11 mm
- Manufacturer: Microtech Metrology
- SKU: 141740303
Facts
- Measuring range: 0–300 mm
- Resolution (display): 0.01 mm
- Accuracy: ±0.04 mm
- Jaw lengths: 130/60 mm
- Protection class: IP67
Special features
- ISO 17025 calibration certificate included
- Digital caliper (battery powered)
- Shifted measuring jaws for extended access
- Suitable for standard machine‑shop and inspection use
FAQ
Is the caliper supplied with a calibration certificate?
Yes. The Digital Caliper from Microtech Metrology (SKU 141740303) is delivered with an ISO 17025 calibration certificate, ensuring traceability and documented acceptance.
What protection does the instrument offer against dust and coolant?
The caliper is rated IP67, which protects it from dust ingress and temporary immersion, making it suitable for wet or oil-prone environments.
What measurement accuracy and resolution can be expected?
The instrument provides a resolution of 0.01 mm and a stated accuracy of ±0.04 mm across the 0–300 mm range, suitable for standard workshop and many quality‑control applications.
Can the caliper be used for inside, outside and depth measurements?
Yes. The digital caliper supports conventional inside, outside and depth measurement operations as standard for this instrument class.
Who is the manufacturer of this caliper?
The caliper is manufactured by Microtech Metrology; the product is listed under Microtech Metrology with SKU 141740303 and is distributed via Metav Werkzeuge for European customers.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.