150mm Depth Gauge Digital 0.01mm Resolution USB Output IP54, ISO 17025 Calibrated - Microtech Metrology
€69.00
Product information "150mm Depth Gauge Digital 0.01mm Resolution USB Output IP54, ISO 17025 Calibrated - Microtech Metrology"
Take advantage of the combination of precise 0–150 mm measurement, USB data export and ISO 17025 calibration for reliable depth checks in daily production. Order the digital depth caliper directly via Metav Werkzeuge or contact our consultants for technical clarification.
Digital Depth Caliper by Microtech Metrology — 0–150 mm, USB output
Digital Depth Caliper from Microtech Metrology, a workshop-grade instrument designed for fast and traceable depth measurements in machining and quality control.
- Measuring range 0–150 mm for standard workshop tasks
- Resolution 0.01 mm and accuracy ±0.02 mm
- Delivered calibrated to ISO 17025 with certificate
- USB data output for secure measurement logging
Precision that reduces rework and speeds inspection
The Digital Depth Caliper delivers repeatable results across its 0–150 mm range, combining a 0.01 mm resolution with an accuracy of ±0.02 mm. Such figures support confident go/no-go decisions during incoming inspection and in-process checks. The supplied ISO 17025 calibration certificate documents traceability and helps meet quality-audit requirements; in practice this reduces doubt about instrument conformity and shortens approval cycles for critical components.
Reliable digital output and clear readout for traceability
A clear 13 mm digital display and USB data output make the instrument practical for serial testing and data capture. Measurements can be logged directly to a PC or data acquisition system, removing transcription errors and enabling simple integration into existing quality-record systems. The combination of a readable display and digital transfer supports faster batch documentation and audit trails, improving process reliability without adding complexity.
Robust handling for daily shopfloor use
Constructed with hand-finished measuring jaws and rated IP54, the caliper tolerates normal workshop contamination while keeping the sensor and electronics protected. The device’s build quality suits the Standard measuring category (best balance of reach and stiffness for 150 mm length), so familiar handling and single-handed operation are preserved. These attributes lower downtime from fragile instruments and keep inspection routines lean.
Fits into structured quality workflows
The instrument supports systematic measurement procedures: calibrated instruments with digital output reduce manual entry, speed throughput and enable immediate review of trends. For teams aiming to streamline first-article inspection or routine depth checks, the gauge delivers technical consistency and a straightforward path to digital record-keeping. If further specification or compatibility checks are needed, Metav’s technical advisors are available to discuss integration and application scenarios.
Contact Metav Werkzeuge in Emmerich for a specification check, ISO 17025 documentation and fast supply of Microtech Metrology digital depth calipers
Technical data
- Article number: 1432010152
- GTIN: 4061905039003
- Manufacturer: Microtech Metrology
- Measuring range: 0–150 mm
- Accuracy: ±0.02 mm
- Resolution (display): 0.01 mm
- Data output: USB
- Display height: 13 mm
- Protection class: IP54
- Digital instrument: yes
- Hand-finished measuring jaws: yes
- Delivered calibrated to ISO 17025 with certificate
Core specifications
- Measuring range: 0–150 mm
- Accuracy: ±0.02 mm
- Resolution: 0.01 mm
- Display height: 13 mm
- Protection rating: IP54
Features
- USB data export for logging and traceability
- Hand-finished measuring jaws for stable contact
- ISO 17025 calibration certificate included
- Category: Standard (measuring range 100–300 mm)
FAQ
What is the measuring range of the instrument?
The instrument measures depths from 0 to 150 mm, making it suitable for typical workshop and machine‑shop depth checks.
Is the caliper delivered calibrated?
Yes. The caliper from Microtech Metrology is supplied fully calibrated to ISO 17025 and includes the corresponding calibration certificate.
How accurate and detailed are the readings?
The device provides a 0.01 mm resolution with an accuracy of ±0.02 mm, suitable for standard quality‑control applications.
How can measurement data be recorded?
Measurements are exported via USB, allowing direct logging to a PC or data system to avoid manual transcription.
Is the instrument suitable for workshop environments?
Yes. With IP54 protection and hand‑finished jaws, the caliper withstands typical dust and splash conditions found on production floors.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools