150mm Depth Gauge Digital Swiss Digit Display IP67, ISO 17025 Calibrated - Microtech Metrology
€299.00
Product information "150mm Depth Gauge Digital Swiss Digit Display IP67, ISO 17025 Calibrated - Microtech Metrology"
Take advantage of a robust, workshop-ready design combined with IP67 ingress protection and a verified accuracy of 0.015 mm; the instrument arrives fully calibrated to ISO 17025 standards with a calibration certificate and is available through Metav Werkzeuge—order the depth caliper directly via Metav Werkzeuge or consult the team for technical guidance.
Digital Depth Caliper – Microtech Metrology, IP67 & ISO 17025 calibrated
Digital Depth Caliper by Microtech Metrology for precise depth measurement in machine and metalworking applications with a 0–150 mm measuring range
- IP67 protection for dusty and wet environments
- Delivered with ISO 17025 calibration certificate
- High accuracy: 0.015 mm for reliable depth checks
- Swiss Digit 11 mm display for clear readings
Robust accuracy for reliable depth measurement
The instrument provides a verified accuracy of 0.015 mm, while the electronic readout supports a fine resolution of 0.001 mm, making it suitable where repeatable depth checks are required. This level of precision reduces uncertainty in quality control tasks and short-run inspections, translating measurement data into dependable pass/fail decisions. The solid measuring guidance and the calibrated electronics together ensure that each reading reflects the true dimension rather than operator estimation.
Built to thrive in workshop conditions
With an IP67 rating the device withstands dust ingress and temporary immersion, so routine coolant or coolant-mist exposures do not compromise measurements. The Swiss Digit display, with an 11 mm character height, improves legibility on the workshop floor and speeds up measurement cycles. Hand-finished measuring jaws ensure consistent contact geometry across the measuring face, which helps to avoid localised errors when probing grooves or stepped features. The combination of rugged sealing and refined contact surfaces supports long-term stability in busy production environments.
Ready-calibrated for traceable quality control
Supplied with a full ISO 17025 calibration and accompanying calibration certificate, the depth caliper arrives ready for integration into documented inspection routines and quality management systems. The 0–150 mm measuring range places this tool in the Standard range (100–300 mm), well suited to general machine‑shop duties where reach and stiffness are balanced. Traceability to an accredited laboratory reduces onboarding time and simplifies product audits, enabling immediate use in acceptance testing and routine checks.
For traceable depth measurement choose the ISO 17025-calibrated Microtech Metrology digital depth caliper—contact Metav Werkzeuge in Emmerich for procurement and expert advice via info@metav-werkzeuge.com or call +49 2822 7131930
Technical data
- Article number: 1432010156
- GTIN: 4061905459733
- Eclass: 21170344
Facts
- Measuring range: 0–150 mm
- Accuracy: 0.015 mm
- Resolution (reading): 0.001 mm
- Display: Swiss Digit, 11 mm character height
- Protection rating: IP 67
Special features
- ISO 17025 calibrated; calibration certificate included
- Hand-finished measuring jaws
- Digital depth measurement
- Classification: Standard range (100–300 mm)
FAQ
Is the depth caliper supplied calibrated?
Yes. The Microtech Metrology digital depth caliper (SKU 1432010156) is delivered fully calibrated to ISO 17025 and includes a traceable calibration certificate.
What accuracy and resolution can be expected for depth checks?
The instrument provides an accuracy of 0.015 mm and an electronic reading resolution of 0.001 mm, suitable for precise workshop and quality‑control measurements.
Can the caliper be used in damp or splash-prone environments?
With an IP67 rating the caliper tolerates dust ingress and temporary immersion, making it appropriate for wet machining environments.
Are the measuring faces suitable for repeatable contact on small steps and grooves?
Yes; the tool features hand-finished measuring jaws that ensure consistent contact geometry and improve repeatability on small or stepped features.
What measuring range does this tool cover and which applications is it best for?
The 0–150 mm range places the device in the Standard category, ideal for general machine and metalworking tasks where a balance of reach and stiffness is required.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.