150mm Depth Digital Caliper Double Hook, Swiss Digit Display IP67 - Microtech Metrology
€239.00
Product information "150mm Depth Digital Caliper Double Hook, Swiss Digit Display IP67 - Microtech Metrology"
Take advantage of fast, repeatable depth checks with a Swiss Digit display and IP67 protection; the robust digital readout and fine resolution ensure smoother inspection cycles. Order the depth caliper directly via Metav Werkzeuge or consult our specialists for application advice.
Depth Caliper — Digital depth gauge with Swiss Digit display and IP67 protection by Microtech Metrology
A Depth Caliper designed for precise depth measurements in workshop and inspection settings, featuring a clear digital readout and sealed construction for dusty or wet environments
- Swiss Digit display, 11 mm height
- Measuring range 0–150 mm
- Accuracy ±0.02 mm
- IP67 protection
Precise measurements for everyday workshop control
The measuring span of 0–150 mm classifies this instrument as Standard, making it ideal for the routine demands of machine and metalworking shops where reach, rigidity and single‑hand operation need to be balanced. With a resolution of 0.001 mm and an accuracy of ±0.02 mm, the caliper provides numerical detail that supports tight tolerances without overcomplicating routine checks. Explaining the figures: resolution indicates the smallest increment the display shows, while stated accuracy describes the expected measurement deviation under standard conditions — together they permit confident pass/fail decisions during incoming inspection or process control.
Durable design that reduces rework and downtime
Sealed to IP67, the unit withstands dust ingress and temporary immersion so measurement capability is retained even in harsher shop‑floor conditions. The Swiss Digit display with its 11 mm character height improves legibility at arm’s length, which speeds up repetitive checks and reduces reading errors. These practical advantages translate directly to fewer interrupted measurement cycles and a steadier production flow, since protected electronics and clear visual feedback minimise the need for repeat measurements.
Clear data and fast inspection routines for better throughput
A concise digital readout and robust construction streamline depth gauging tasks during assembly, fixture set‑up and quality sampling. The compact form and responsive electronics support quick comparisons against set tolerances, lifting throughput without sacrificing control. Stocked and distributed through Metav’s European quality channel, the instrument benefits from a tested logistics path that prioritises consistency — a practical moral advantage for buyers who prefer transparent supply and predictable availability.
Contact Metav Werkzeuge for a specification check or to request a tailored quotation for the Microtech Metrology digital depth caliper
Technical data
- Article number: 1432020153
- GTIN: 4061905456282
- Manufacturer: Microtech Metrology
Facts
- Measuring range: 0–150 mm
- Resolution: 0.001 mm
- Accuracy: ±0.02 mm
- Display height: 11 mm
- Protection rating: IP67
Special features
- Digital readout: Swiss Digit
- Sealed construction for wet/dusty environments
- Digital instrument suitable for standard workshop inspection
- Category: Standard measuring range caliper
FAQ
What measurement range does the depth caliper cover? The Microtech Metrology depth caliper covers 0–150 mm, placing it in the Standard class suitable for general machine‑shop and metalworking tasks.
What resolution and accuracy can be expected? The instrument offers a resolution of 0.001 mm and an accuracy of ±0.02 mm, delivering fine increments on the readout with industrially relevant precision.
Is the display readable on the shop floor? Yes. The Swiss Digit display with 11 mm character height provides clear readability during routine checks and speeds up inspection cycles.
Can the caliper be used in dusty or wet environments? The caliper is rated IP67, which protects its electronics from dust ingress and temporary immersion, making it robust for many shop‑floor conditions.
Is this depth gauge suitable for production control? With its Standard measuring range, fine resolution and sealed design, the Microtech Metrology digital depth gauge is well suited to repetitive production checks and incoming inspection.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.