300mm Depth Digital Caliper Double Hook, Swiss Digit Display 11mm, IP67 - Microtech Metrology
€299.00
Product information "300mm Depth Digital Caliper Double Hook, Swiss Digit Display 11mm, IP67 - Microtech Metrology"
Take advantage of robust IP67 protection, a high-contrast Swiss Digit display and a fine 0.001 mm reading to secure reproducible depth measurements across the workshop; order the depth caliper directly via Metav Werkzeuge or contact our consultants for application-specific advice.
Depth Caliper — Digital depth caliper with Swiss Digit display and IP67 protection (Microtech Metrology)
Depth Caliper for fast, reliable depth measurement in machine shops and inspection bays with a clear Swiss Digit display and durable enclosure
- Swiss Digit 11 mm display
- IP67 dust and water protection
- Precise 0–300 mm measuring range
- Resolution 0.001 mm reading
High-resolution measurement for demanding shop-floor tasks
The instrument delivers a 0.001 mm reading, making it suitable where fine depth distinctions matter. With a measuring span of 0–300 mm, the tool fits the standard caliper class used across general engineering and metalworking. The combination of a fine digital readout and a robust construction reduces repeat-measurement scatter, supporting faster decision-making on the production line. The clear Swiss Digit display (11 mm high digits) speeds reading and reduces transcription errors during inspection rounds, while the stable digital electronics allow quick capture of values for process control.
Durable design that withstands industrial environments
Engineered for frequent use, the caliper is rated IP67, which protects internal electronics against dust ingress and short-term immersion. This level of protection extends service intervals and minimises downtime caused by contaminants or coolant mist common in machining cells. The sealed digital unit and rugged slider ensure consistent performance in mixed environments, from bench inspection to on‑machine checks, and support long-term reliability under routine shop stresses.
Practical handling and integration for everyday use
Ergonomic balance and a concise display layout allow rapid depth measurements on workpieces, gauges and toolsetups. As a dedicated depth instrument, it simplifies tasks that otherwise require improvised fixtures or repeated manual checks. The device suits maintenance, quality control and in-process verification tasks where traceable, repeatable depth data are required. For procurement and inventory planning, listing the product as a digital depth caliper ensures compatibility with workshop tooling lists and inspection procedures.
For tailored advice and reliable supply of this Microtech Metrology depth caliper (SKU 1432020303), contact Metav Werkzeuge in Emmerich for local stock information and technical guidance.
Technical data
- Article number: 1432020303
- GTIN: 4061905456299
- Manufacturer: Microtech Metrology
- Category: Digital caliper
- IP protection: IP67
- Display: Swiss Digit, 11 mm
- Digital: yes
Facts
- Measuring range: 0–300 mm
- Resolution / reading: 0.001 mm
- Display height: 11 mm
- eClass: 21170344
Special features
- Swiss Digit display
- IP67 dust and water protection
- Digital depth caliper for workshop use
- Standard range classification: Standard (max 100–300 mm)
FAQ
What measuring range does the depth caliper cover?
The Microtech Metrology depth caliper covers a 0–300 mm measuring range (SKU 1432020303), matching standard workshop requirements for components and fixtures.
What is the smallest increment readable on the display?
The instrument provides a 0.001 mm reading resolution via the Swiss Digit display, enabling fine depth discrimination for inspection tasks.
Is the caliper suitable for damp or dusty environments?
Yes — the caliper is rated IP67, which protects against dust ingress and temporary immersion, making it suitable for many shop-floor conditions.
Which display does the device use and how readable is it?
The unit features a Swiss Digit display with 11 mm high digits for improved legibility during fast inspection cycles.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.