300mm Depth Gauge Digital With Nail Tip, Swiss Digit 11mm Display, IP67 - Microtech Metrology
€399.00
Product information "300mm Depth Gauge Digital With Nail Tip, Swiss Digit 11mm Display, IP67 - Microtech Metrology"
Take advantage of a robust, IP67-rated design and a clear Swiss Digit display to speed up inspection cycles while maintaining repeatable results; order the depth caliper directly via Metav Werkzeuge or consult our specialists for application advice.
Depth caliper — digital depth gauge, IP67 protection, 0–300 mm
A depth caliper designed for precise depth measurement in machine shops and quality control, offering a protected digital readout and a practical 0–300 mm measuring range.
- Robust IP67 protection for wet environments
- Swiss Digit 11 mm digital display for clear readings
- 0–300 mm measuring range for workshop and QA
- 0.03 mm accuracy for reliable depth measurement
High-precision depth measurement that accelerates quality checks
The Depth Caliper delivers a measurable improvement in inspection speed by combining a high-contrast Swiss Digit display with a fine resolution of 0.01 mm and a stated accuracy of ±0.03 mm. This precision reduces rework and inspection uncertainty when checking recesses, bore depths or step heights. The numeric tolerances are presented in a standard, comparable format so that results can be logged and traced across production batches, supporting rational decision-making in quality control.
Built to withstand workshop conditions for reliable repeatability
With an IP67 rating the instrument resists dust ingress and temporary immersion, which keeps the electronics operational during routine cleaning or in oily environments. The sealed design lowers the risk of downtime from moisture-related faults and maintains stable readings across shifts. This robustness translates directly into fewer measurement interruptions and a more predictable inspection routine, which is especially valuable in busy metalworking or maintenance shops where environmental exposure is common.
Clear numeric feedback for faster inspection workflows
The Swiss Digit display, with an 11 mm character height, provides large, legible figures that reduce reading errors and speed up handover between operators. The digital interface presents results immediately in either millimetres or alternative units where required, cutting out manual conversion and lowering cognitive load during batch checks. A readable display and dependable numeric output contribute to faster cycle times and smoother process control in serial production and incoming inspection.
Versatile standard-range tool for everyday machine‑shop tasks
Classified in the standard measuring range (0–300 mm), this depth gauge balances reach and stiffness for general workshop use: suitable for typical components, fixtures and housings encountered in machining and metal fabrication. The form factor supports single-handed operation for quick spot checks while still providing the reach needed for most depth measurement tasks. As a digital depth instrument it fits into inspection benches where repeatability and ease of documentation are priorities.
Choose the Microtech Metrology depth caliper when robust protection and clear digital readouts are essential—contact Metav Werkzeuge for tailored ordering and application guidance from Emmerich.
Technical Data
- SKU: 1432030303
- GTIN: 4061905459801
- Manufacturer: Microtech Metrology
- ECLASS: 21170344
- Digital display: Swiss Digit, height 11 mm
Facts
- Measuring range: 0–300 mm
- Resolution: 0.01 mm
- Accuracy: ±0.03 mm
- Protection class: IP67
Special features
- Measurement type: depth gauge caliper
- Display type: digital
- Readability: large 11 mm characters
- Intended use: workshop and quality control
FAQ
What measuring range and resolution does this depth caliper provide?
The Microtech Metrology depth caliper (SKU 1432030303) covers a measuring range of 0–300 mm, with a display resolution of 0.01 mm and a stated accuracy of ±0.03 mm for standard inspection tasks.
Is the instrument suitable for harsh workshop environments?
Yes, the device carries an IP67 rating, meaning it is protected against dust and temporary immersion; this makes it appropriate for machining environments where coolant splash or cleaning operations occur.
How does the Swiss Digit display improve usability?
The Swiss Digit display with 11 mm characters offers high legibility, reducing read errors and speeding up routine checks; large numerals and a clear digital readout support faster throughput in inspection workflows.
For which applications is the depth caliper most suitable?
Designed as a standard-range instrument, it is ideal for machining, metalworking and general quality control where depths, steps and recesses up to 300 mm must be checked with repeatable accuracy.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.