500mm Depth Gauge Digital With Nail Tip, Swiss Digit 11mm Display, IP67 - Microtech Metrology
€549.00
Product information "500mm Depth Gauge Digital With Nail Tip, Swiss Digit 11mm Display, IP67 - Microtech Metrology"
Robust, workshop-ready performance with a Swiss Digit 11 mm display, IP67 protection and a 0–500 mm measuring range ensures consistent depth measurement and reduced rework; order the depth caliper directly via Metav Werkzeuge or consult our advisors if clarification is needed.
Depth Caliper — Digital Depth Gauge with Swiss Digit Display and IP67
Depth Caliper with a sealed electronic display and a pointed measuring tip for reliable depth measurement in workshop and inspection environments
- IP67 protection for wet and dusty environments
- Swiss Digit display, 11 mm high digits
- Measuring range 0–500 mm, 0.04 mm accuracy
Accurate measurement that keeps production moving
The digital depth caliper delivers repeatable readings with an indicated accuracy of 0.04 mm and a display resolution of 0.01 mm, combining measurable precision with straightforward operation. The tall, high-contrast Swiss Digit 11 mm readout improves legibility on the shop floor, reducing read errors and inspection time. For medium-format components the caliper’s 0–500 mm range covers common depth checks while maintaining stiffness and handling typical for this size class, helping to lower scrap rates and speed up quality checks.
Sealed electronics and a geometry for narrow depths
Designed for demanding conditions, the instrument’s IP67 rating means the electronics are protected against dust ingress and short periods of immersion, which is a decisive advantage when measurements must be taken near coolant-splashed or dusty processes. The pointed measuring tip (nail-type) provides access to narrow bores and recesses that standard flat jaws cannot reach, enabling depth checks where specialised tools would otherwise be required. This construction supports consistent measurement technique and reduces the need for repeat setups.
Practical integration into inspection routines
The caliper suits routine quality control and workshop measuring thanks to its digital readout and robust housing. As a digital measuring instrument it simplifies documentation and speeds up manual recording compared with analogue alternatives. The instrument is classified in the medium range commonly used in machine and metalworking shops, offering an effective balance between reach and rigidity. Where traceability and process integration are priorities, the clear numeric readout and durable design make this caliper a reliable part of an operator’s toolkit.
Contact Metav Werkzeuge for advice on specifying the right Microtech Metrology depth caliper for inspection or production tasks; our Emmerich-based team can confirm suitability and arrange delivery from stock.
Technical Data
- Article number: 1432030503
- GTIN: 4061905459818
- Manufacturer: Microtech Metrology
- Product type: Digital depth caliper
Core specifications
- Measuring range: 0–500 mm
- Resolution (display): 0.01 mm
- Accuracy: ±0.04 mm
- Display: Swiss Digit, 11 mm
- Protection class: IP67
Features
- Pointed nail tip for narrow depth measurements
- Digital readout
- Medium-range classification (Mittel 300–500 mm)
- Category: Digital calipers
- SKU: 1432030503
FAQ
What measuring tasks is this caliper best suited to?
This depth caliper from Microtech Metrology is optimised for medium-range depth checks (0–500 mm) and narrow recess measurements thanks to its pointed measuring tip.
Is the caliper protected against coolant and dust?
Yes, the instrument is rated IP67, so the sealed electronics withstand dust and temporary immersion, making it suitable for workshop environments.
What accuracy and resolution can be expected?
The digital depth gauge provides a resolution of 0.01 mm and an indicated accuracy of ±0.04 mm, suitable for routine workshop inspection and quality-control tasks.
Does the display remain legible under workshop lighting?
The Swiss Digit 11 mm display offers tall, high-contrast digits that improve readability in typical shop-floor lighting and speed up measurement reading.
Which manufacturer and SKU identify this product?
The caliper is supplied by Microtech Metrology and available as SKU 1432030503 for ordering and inventory purposes.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.