150mm Digital Caliper 0.001mm Resolution Inductive System IP67 Three-Point, Four-Function, Supplied in Case - Metav IndustryLine
€105.00
Product information "150mm Digital Caliper 0.001mm Resolution Inductive System IP67 Three-Point, Four-Function, Supplied in Case - Metav IndustryLine"
Take advantage of a high-resolution 0.001 mm readout combined with IP67 protection and an inductive measuring system for reliable routine checks; order this caliper directly via Metav Werkzeuge or consult their specialists for application advice.
M216.166 Digital caliper — 150 mm, 0.001 mm resolution, IP67 (Metav IndustryLine)
The M216.166 Digital caliper is a compact, inductive 150 mm measuring tool with a high-resolution display and robust ingress protection, designed for precise workshop and inspection work.
- High-resolution 0.001 mm display
- IP67 protection for harsh environments
- Inductive measuring system for reliability
- Stainless steel (INOX) construction
Measure small tolerances faster and with confidence
The caliper delivers a 0.001 mm resolution on a clear digital display, which shortens inspection cycles by reducing reading uncertainty. Its inductive measuring system eliminates mechanical contact wear in the scale, maintaining stable results over time; this is particularly useful for frequent checks and serial inspection tasks. The instrument supports four measurement modes — exterior, interior, depth and step — enabling a single tool to replace several specialised gauges and thus streamline bench workflows.
Built for demanding production environments
With an IP67 rating and an INOX stainless steel body, the instrument resists dust ingress and temporary immersion, so measurements stay dependable on busy shop floors. The solid construction and the included locking screw secure the slider during handling, reducing the chance of inadvertent zero shifts. A compact overall weight of 0.4 kg keeps the caliper easy to manoeuvre during repetitive work while preserving the stiffness needed for reproducible measurements.
Ergonomic display and practical functions to save time
The readout offers quick mode changes including mm/inch selection, a MODE button and a 0/ON/OFF function for straightforward operation and fast switching between metric and imperial workflows. The short jaw length of 40 mm supports precise positioning on small components, while the standard 150 mm measuring range matches typical workshop requirements and supports efficient one-handed checking of machined parts. These features reduce handling time and help maintain a smooth production rhythm.
Reliable baseline for quality control and documentation
Designed to meet workshop and inspection demands, the caliper provides consistent results that integrate well into established quality routines; its specification indicates performance above standard DIN 862 expectations. The combination of high resolution, a sealed design and a robust measuring system makes it suitable for repetitive measurement tasks where traceability and repeatability are priorities. Metav IndustryLine’s presence in Emmerich adds an additional quality filter for supply and logistics across Europe.
For robust, high-resolution measurement rely on the Metav IndustryLine M216.166 — contact Metav Werkzeuge in Emmerich for application guidance and dependable supply via info@metav-werkzeuge.com or +49 2822 7131930
Technical Data
- Article number: M216.166
- GTIN: 4054469164915
- ECLASS: 21170344
- Tariff number: 90173000
- Manufacturer: Metav IndustryLine
Facts
- Measuring range: 0–150 mm
- Resolution: 0.001 mm
- Inch resolution: 0.00005 in
- Weight: 0.4 kg
- Jaw length: 40 mm
- Protection class: IP67
Special features
- Inductive measuring system
- INOX stainless steel material
- Digital display with MODE, mm/inch and 0/ON/OFF
- Locking screw for fixed measurements
- Four measurement modes: exterior, interior, depth, step
- Specification exceeds DIN 862
FAQ
Is this caliper waterproof and suitable for the workshop?
Yes. The M216.166 features an IP67 rating, making the caliper dustproof and resistant to temporary immersion — suitable for many workshop conditions.
What measurement modes are available with this caliper?
The instrument supports four measurement modes: exterior, interior, depth and step measurements, enabling versatile use across inspection tasks.
What is the smallest increment that can be read?
The digital readout provides a resolution of 0.001 mm (0.00005 in), allowing detection of very small dimensional changes during quality checks.
Does the caliper require regular maintenance to keep accuracy?
Routine cleaning and careful handling will preserve performance; the inductive scale minimises wear compared with mechanical systems, extending service intervals.
Is this caliper suitable for use in production quality control?
Yes. With its high resolution, robust construction and sealed design, the caliper is well suited for recurring quality-control measurements on machined parts.
Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
| Designation: | Taschen-Messschieber |
|---|---|
| Material: | rostfreier Stahl, gehärtet |
| Meas.schnabel oben: | 21mm |
| Protection rating: | IP 67 |
| Range: | 0-150mm |
| Range-1: | 150mm |
| Schnabellänge: | 40mm |
Accessory Items
Take advantage of the combination of consistent ±8 N force application and a low inertial mass for faster, more reproducible inline checks; order directly via Metav Werkzeuge or consult the team for integration advice. Force adapter for digital calipers M401.041 — ±8 N roller accessory (Metav IndustryLine) The force adapter for digital calipers M401.041 is an accessory that applies a controlled rolling force to a caliper jaw, designed to standardise contact pressure during comparative and serial measurements with digital calipers. Precise ±8 N measuring force Compatible with thumb‑roller calipers Lightweight — only 28 g Consistent contact pressure for repeatable measurement results A controlled contact force reduces operator‑dependent variability; the ±8 N specification ensures a uniform load that stabilises the measurement interface. By converting manual thumb pressure into a defined rolling force via the integrated roller, the accessory improves repeatability in production inspection and end‑of‑line checks. This stabilisation shortens decision cycles and lowers the rate of false rejects by making each contact between jaw and workpiece more consistent. Easy retrofit and minimal influence on handling Integration requires no complex setup: the adapter mounts to calipers with a thumb‑roller interface and keeps the original handling characteristics intact. The very low mass (approx. 28 g) means negligible added inertia, so short measuring strokes and tactile feel remain virtually unchanged. Compatibility with standard digital calipers allows existing instruments to be upgraded for force‑controlled measurements without replacing the measuring device, improving throughput while keeping investment low. Practical benefits for inspection and serial testing Using a dedicated force accessory speeds up repetitive measuring tasks by removing the need for operator training on applied pressure. The roller design preserves surface finish and prevents point loading on delicate parts while delivering a consistent contact condition for each cycle. Supplied as an accessory from Metav IndustryLine, the unit supports efficient workflows in workshop, toolroom and small‑scale production environments where reliable, repeatable contact force is required. For advice on fitting the adapter or to order the M401.041, contact Metav Werkzeuge GmbH in Emmerich — info@metav-werkzeuge.com or +49 2822 7131930 — the Metav team will assist with integration and delivery options Technical data SKU: M401.041 GTIN: 4054469143651 Weight: 0.028 kg Tariff number: 90178090 Category: Accessory for measuring instruments Core measurements Measuring force: ±8 N Mass: 0.028 kg eCl@ss: 21160592 Special features Roller for consistent contact Compatible with digital calipers with thumb roller Accessory for serial and comparative measurement FAQ How does the adapter ensure consistent measurement force? The adapter applies a defined ±8 N rolling force through its roller mechanism, so each contact is made with reproducible pressure, reducing operator influence on readings. Can it be fitted to any digital caliper? The adapter is designed for calipers that use a thumb roller for jaw actuation; the M401.041 fits standard thumb‑roller interfaces used on many digital calipers. Does the adapter affect measurement speed or handling? The low mass (approx. 28 g) adds minimal inertia, preserving normal handling and allowing quick, repeatable measuring cycles without perceptible slowdown. Is the accessory suitable for delicate surface finishes? Yes, the roller distributes contact pressure and avoids point loading, helping to protect delicate surfaces while maintaining consistent contact conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com