175mm Rockwell Hardness Tester DigiRock HR1 With Dial Gauge 0.5 HRC (HRB), Diamond/Carbide Indenters, 3 Test Tables - Metav IndustryLine

The combination of robust construction, selectable test forces and a clear dial reading makes this bench Rockwell tester a practical choice for routine hardness control in workshops and metallurgical labs; order or request further advice directly via Metav Werkzeuge if required.

DigiRock HR1 Rockwell hardness tester — three selectable test forces, 175 mm max. height

The DigiRock HR1 is a compact bench Rockwell hardness tester designed for reliable hardness testing of metals and castings, suitable for workshop quality control and inspection tasks.

• Three selectable test forces up to 1471 N
• Max. workpiece height 175 mm
• Includes HRC and HRB comparison plates
• Dial reading resolution 0.5 HRC/HRB

High-precision measurement for repeatable results

The DigiRock HR1 delivers consistent hardness readings by combining a fixed preliminary force with three selectable main forces (588.4 N, 980.7 N and 1471 N) and a preload of 98.07 N, which stabilises the contact before the main test. This sequence follows the Rockwell principle: a baseline indentation is created and then the deeper main load is applied so that the subsequent depth measurement yields a direct hardness value. The integrated dial gauge with 0.5 HRC/HRB reading provides a clear analogue indication for straightforward interpretation in routine production checks, while the solid bench construction supports repeatability across multiple test cycles.

Designed for practical workshop use and varied materials

Engineered as a bench unit with a compact footprint (546 x 182 x 755 mm) and a reach of 165 mm, the instrument is intended for common shop-floor applications where space is at a premium. The tester is suitable for hardness testing of a range of materials including steels, cast iron, copper and brass, accommodating workpieces up to a maximum height of 175 mm. The combination of accessible test forces and a robust base makes the unit a pragmatic choice for maintenance departments, small production sites and metalworking workshops that require dependable Rockwell testing without excessive complexity.

Accessories that reduce setup time and improve traceability

Each tester is supplied with essential accessories to simplify first-use checks and to support traceable comparisons: comparison plates for HRC and HRB, a 120° diamond indenter, a carbide indenter (Ø 1.588 mm) and three support plates (Ø 150 mm, Ø 60 mm and V‑form). These inclusions permit immediate verification of instrument behaviour and enable testing of shafts, small components and flat specimens without additional purchases. The presence of both HRC and HRB comparison standards assists in quick cross-checks between scales, strengthening the instrument’s role in routine quality-control workflows.

Robust build for reproducible inspection cycles

At approximately 90 kg, the tester’s mass contributes to mechanical stability during indentation cycles, reducing vibration and supporting reproducible depth measurements. The combination of a stable frame and clearly defined test forces reduces operator-induced variability, which is especially valuable in environments with frequent measurements. For workshops that run repetitive hardness checks, the machine’s configuration—including the clear dial indication and the three readily selectable loads—streamlines operation while delivering industrial-grade consistency.

Contact Metav Werkzeuge to discuss whether the DigiRock HR1 fits the inspection needs of the workshop and to request a tailored quotation or further technical details

Technical data

• SKU: M502.215
• GTIN: 4054469164984
• Manufacturer: Metav IndustryLine

Facts

• Dimensions: 546 x 182 x 755 mm
• Reach (ausladung): 165 mm
• Weight: 90 kg
• Max. workpiece height: 175 mm
• Test forces: 588.4 N, 980.7 N, 1471 N
• Preload: 98.07 N
• Dial reading resolution: 0.5 HRC / HRB

Special features

• Includes HRC and HRB comparison plates
• Diamond indenter 120°
• Carbide indenter Ø 1.588 mm
• Three support plates: Ø 150 mm, Ø 60 mm, V‑form
• Suitable for steels, cast iron, copper and brass

FAQ

What test forces are available on this tester? The DigiRock HR1 provides three selectable main forces of 588.4 N, 980.7 N and 1471 N, together with a preload of 98.07 N to ensure stable contact before the main measurement.

Which materials can be tested with this Rockwell tester? This bench Rockwell hardness tester is suitable for hardness testing of various steels, cast iron, copper and brass up to a maximum workpiece height of 175 mm.

Does the unit include reference standards or indenters? The delivery includes HRC and HRB comparison plates, a 120° diamond indenter and a carbide indenter (Ø 1.588 mm), plus three support plates (Ø 150 mm, Ø 60 mm and V‑form).

How is the result displayed and read? Results are read from an analogue dial gauge with a resolution of 0.5 on the HRC/HRB scale, providing an immediate visual indication ideal for routine inspection tasks.

Is the tester suitable for frequent shop‑floor use? Yes, the machine’s robust bench construction, selectable test forces and comprehensive accessory set make the DigiRock HR1 well suited to repetitive hardness testing in workshop and production environments.

Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com