400mm Machine Saw Blade HSS Bimetal 8.5mm Hole 4 TPI Raker Teeth, Vacuum‑Hardened - TECWERK

Take advantage of the vacuum‑hardened HSS bimetal construction and staggered teeth for reliable, fast cutting across a broad range of materials; the 400 × 32 × 2 mm format with an 8.5 mm bore ensures straightforward machine compatibility. Order the blade directly via Metav Werkzeuge or consult our specialists for selection advice.

Machine saw blade L400 × 32 × 2 mm, HSS bimetal – TECWERK (bore 8.5 mm, 4 TPI)

Machine saw blade L400 × 32 × 2 mm, HSS bimetal designed as a vacuum‑hardened machine blade for coarse, efficient cutting in demanding workshop and production environments.

• Vacuum‑hardened HSS bimetal construction
• Staggered (set) teeth for robust cutting
• 400 × 32 × 2 mm for standard machine fit
• 8.5 mm bore with 4 TPI for coarse feeds

Durable cutting performance for heavy use

The combination of HSS bimetal and vacuum hardening provides a blade that resists premature wear and keeps its cutting geometry under load. Vacuum hardening reduces internal stresses and improves toughness so that the blade maintains consistent cutting behaviour during longer runs. For workshop and light industrial environments this translates into fewer blade changes and less machine downtime, supporting a smoother production flow and predictable throughput.

Coarse tooth geometry for fast material removal

A 4 TPI tooth pitch with staggered (set) teeth is designed to remove material quickly while minimising clogging on mixed or fibrous stocks. This geometry suits operations that prioritise feed rate and rapid throughput over ultra‑fine finishes; the result is faster cut‑through times with acceptable surface quality for many general fabrication tasks. The staggered teeth also help to reduce cutting forces and vibration, supporting steadier feeds and longer tool life.

Straightforward fitment and machine compatibility

With overall dimensions of 400 × 32 × 2 mm and an 8.5 mm bore, the blade fits machines that accept this standard mounting and length‑to‑hole spacing. The specification “length = hole spacing” ensures correct engagement with standard arbors and mounting systems. The relatively slim 2 mm thickness balances rigidity and cutting clearance, making this blade a pragmatic choice for machines where a combination of strength and efficient chip evacuation is required.

Practical handling, maintenance and application range

The TECWERK machine saw blade is supplied as a single unit and requires standard mounting procedures. The HSS bimetal edge resists chipping compared with high‑speed steel edges alone, offering predictable resharpening intervals where applicable. Although optimised for coarse cutting, the blade’s construction permits use across a wide spectrum of materials; operators benefit from straightforward replacement routines and a robust performance profile that supports both one‑off jobs and repetitive batch work.

For robust, vacuum‑hardened cutting performance from a machine saw blade built for coarse, efficient material removal, contact Metav Werkzeuge for procurement and technical advice — info@metav-werkzeuge.com or +49 2822 7131930

Technical data

• Article number: 2000814123NW
• Label: Maschinensägeblatt L400xB32xS2mm HSS Loch-D.8,5mm ZpZ 4 TECWERK
• Manufacturer: TECWERK
• Product type: Machine saw blade
• Packaging unit: 1

Facts

• Length: 400 mm
• Width: 32 mm
• Thickness: 2 mm
• Bore diameter: 8.5 mm
• Teeth per inch: 4
• SKU / UID: 2000814123NW

Special features

• HSS bimetal
• Vacuum‑hardened blade
• Staggered (set) teeth
• Length equals hole spacing
• Designed for coarse, fast cutting across many materials

FAQ

What materials can this machine saw blade cut?
The machine saw blade L400 × 32 × 2 mm (HSS bimetal) is vacuum‑hardened and configured for coarse cutting, making it suitable for a wide range of materials commonly encountered in workshop use; check cutting parameters with the machine and workpiece before full‑scale operation.

Is the 8.5 mm bore compatible with standard arbors?
Yes, the blade’s 8.5 mm bore and the specified length‑to‑hole spacing are intended for compatibility with machines that accept this mounting dimension; confirm arbor sizes before fitting the blade 2000814123NW.

How does the 4 TPI tooth pitch affect cutting?
A 4 TPI (teeth per inch) pitch provides coarse, aggressive material removal; the staggered teeth reduce clogging and vibration, delivering faster feed rates where surface finish is a secondary concern.

Can the blade be resharpened or is it disposable?
The HSS bimetal edge of this TECWERK blade extends service life compared with simple HSS; depending on wear and the specific application, resharpening may be possible — assess blade condition and consult standard workshop practices.

What are the main advantages of the vacuum‑hardening process?
Vacuum hardening improves toughness and reduces internal stresses in the HSS bimetal construction, resulting in better edge retention and longer service life under continuous cutting loads.

Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund