500mm Machine Saw Blade HSS Bimetal 50mm Width 2.5mm Thickness 10.5mm Hole 4 TPI Set - TECWERK

Take advantage of a vacuum-hardened HSS-bimetal construction combined with a 50 mm blade width and 2.5 mm thickness for stable, repeatable cuts; order the blade directly via Metav Werkzeuge or request application advice from Metav's consultants.

TECWERK machine bandsaw blade L500 × 50 × 2.5 mm, HSS, Ø10.5 mm, 4 TPI

A TECWERK machine bandsaw blade L500 × 50 × 2.5 mm designed for robust, industrial cutting where durability and consistent tooth geometry matter most.

• Vacuum-hardened HSS-bimetal construction
• 500 mm length × 50 mm width
• 2.5 mm thickness for high rigidity
• 10.5 mm centre hole, 4 TPI set teeth

Reliable material and edge technology for predictable results

The blade is made from HSS-bimetal, a pairing of high-speed steel cutting edges welded to a flexible backing, and is vacuum-hardened to increase edge life and resistance to heat-induced wear. This combination yields a balance between toughness and hardness: the cutting edges remain sharp under load while the backing resists fatigue. The set teeth (geschränkt) provide controlled chip clearance, reducing binding in mixed-material cuts. Such construction is particularly relevant in production environments where consistent cycle times and low scrap rates form part of efficiency targets.

Dimensions and tooth geometry that support industrial workflows

With a nominal length of 500 mm, a blade width of 50 mm and a blade thickness of 2.5 mm, the geometry offers lateral stability and reduced vibration during cutting. The 10.5 mm centre hole simplifies mounting to compatible saw arbors and aligns blade seating precisely. The tooth count of 4 TPI (teeth per inch) indicates a coarser pitch suitable for medium to thick section cutting and rapid material removal; fewer teeth per inch improves metal evacuation and reduces heat build-up when sawing dense materials. These measured specifications help planners select the correct blade to match material thickness and feed strategy for predictable throughput.

Practical benefits: uptime, maintenance and compatibility

A stiffer 2.5 mm web limits deflection under feed forces, which contributes to cleaner kerfs and less rework. The 50 mm width supports straight tracking, especially on longer cuts, and reduces the need for frequent realignment. Because the blade is manufactured for general industrial use, it is compatible with a wide range of workshop and production bandsaw setups that accept a 500 mm length and 10.5 mm arbor. Maintenance focuses on keeping the blade free from built-up material and inspecting teeth for wear; the HSS-bimetal construction extends service intervals compared with plain carbon blades, supporting higher machine availability and lower lifetime labour per cut.

For confident, long-lasting cutting performance, order the TECWERK HSS-bimetal machine bandsaw blade through Metav Werkzeuge or contact Metav's specialists at info@metav-werkzeuge.com or +49 2822 7131930 for tailored application guidance

Technical data

• Article number: 2000814146NW
• Label: Maschinensägeblatt L500xB50xS2,5mm HSS Loch-D.10,5mm ZpZ 4 TECWERK
• Manufacturer: TECWERK
• Product type: Machine bandsaw blade

Facts

• Length: 500 mm
• Width: 50 mm
• Thickness: 2.5 mm
• Centre hole diameter: 10.5 mm
• Teeth: 4 TPI
• Packaging unit: 1

Special features

• Material: HSS-bimetal
• Heat treatment: vacuum-hardened
• Tooth set: geschränkt (set teeth)
• Coarse pitch for efficient chip removal
• Suited for general industrial cutting tasks

FAQ

What materials can this blade cut effectively?
The TECWERK machine bandsaw blade is produced as an all-round HSS-bimetal solution and, thanks to its vacuum-hardened teeth and set geometry, is suitable for cutting a broad range of materials in industrial contexts, particularly where a coarse pitch and robust edge retention are required.

How does the 4 TPI tooth count affect cutting performance?
A 4 TPI configuration on this bandsaw blade delivers faster material removal and effective chip evacuation for thicker sections; the coarser pitch reduces clogging and heat, which is advantageous for ferrous and mixed-material cutting applications.

Is the 10.5 mm hole compatible with standard arbors?
The 10.5 mm centre hole is specified for accurate mounting on compatible saws; confirmation of arbor compatibility with the machine is recommended before installation to ensure safe and precise operation.

What maintenance is required to maximise blade life?
Regular cleaning to remove resin and built-up swarf, routine checks for tooth damage, and correct tensioning and alignment on the saw will extend the working life of the HSS-bimetal blade and maintain cutting quality.

Can this blade be used on handheld saws or only on stationary machines?
This product is designed as a machine bandsaw blade for stationary industrial or workshop bandsaw systems that accept the specified length, width and arbor diameter; it is not intended for handheld saw applications.

Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund