250mm Metal Circular Saw Blade BW Tooth, HSS-Co Vapour-Treated, 32mm Bore With Multiple Auxiliary Holes - TECWERK

Take advantage of a robust HSS‑Co construction and a vapour‑treated coating to reduce material build‑up and extend service life; the fine 200‑tooth BW geometry combined with a 2.0 mm kerf delivers smooth, low‑burr cuts in stainless and high‑strength steels — order directly via Metav Werkzeuge or request tailored advice from our consultants.

TECWERK HSS‑Co 250 mm circular metal saw blade (200 teeth, 2.0 mm kerf)

The TECWERK HSS‑Co 250 mm circular metal saw blade is engineered for precision sawing of stainless and other high‑strength steels in industrial circular sawing machines

• HSS‑Co high‑speed steel with cobalt alloy
• Vapour‑treated coating prevents material welding
• Fine 200‑tooth BW pattern for smooth stainless cuts
• 250 mm diameter, 2.0 mm kerf, 32 mm bore

Precision cutting for stainless and high‑strength steels

The blade’s HSS‑Co composition provides a high red‑hardness and wear resistance that translates into consistently accurate cuts under industrial loads. With a 200‑tooth configuration and the BW tooth geometry (bow tooth with alternating bevel), the blade produces a fine surface finish and reduced burr formation. For workshops and production lines where component tolerances and finish quality matter, this saw blade improves downstream processing by lowering the need for extensive deburring and secondary operations, thereby increasing throughput and reducing total machining time.

Less welding and cleaner edges thanks to vapour treatment

A vapour‑treated coating acts as a barrier against material adhesion and reduces the tendency of stainless and tough alloys to weld onto the cutting edge. The treatment enhances chip evacuation and keeps gullets clear, which maintains cutting performance during long runs. As a result, the tool life is extended and cycle stability improves, supporting predictable production schedules and diminishing unscheduled blade changes. The practical benefit is fewer interruptions and a steadier quality of cut across batches.

Straightforward integration with common circular sawing systems

Mounting is simplified by the standard 32 mm bore combined with the specified auxiliary holes pattern (2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm), ensuring compatibility with a wide range of industry machines such as Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas models. The 2.0 mm kerf strikes a balance between material saving and rigidity, making the blade suitable for automated sawing stations and manual saw benches alike. Clear machine compatibility reduces setup time and supports rapid changeovers in mixed‑production environments.

Robust design for economic performance and uptime

Constructed for demanding workshop use, the blade combines durability with efficient cutting dynamics. The narrow 2.0 mm cut minimises material loss per stroke, contributing to cost efficiency on high‑volume runs, while the cobalt alloy base metal sustains cutting temperatures for longer tool life. For procurement and maintenance planning, this means fewer replacements and a lower total cost of ownership over time. Metav’s logistics and quality control further ensure reliable supply and consistent tool quality for every order.

For tailored recommendations on the TECWERK HSS‑Co 250 mm blade and to secure supply for your workshop, contact Metav Werkzeuge for specification advice and ordering assistance.

Technical data

• Article number: 2000814206NW
• Label: Metallkreissägeblatt Form BW D.250mm B.2,0mm HSS‑Co Bohr.‑D.32mm Z.200 TECWERK
• Manufacturer: TECWERK

Facts

• Diameter: 250 mm
• Width / kerf: 2.0 mm
• Teeth: 200
• Bore diameter: 32 mm
• Pitch / division: 4
• Packaging unit: 1

Special features

• Material: HSS‑Co (cobalt high‑speed steel)
• Coating: vapour‑treated for protection against material welding
• Tooth form: BW — bow tooth with alternating bevel
• Auxiliary holes: 2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm
• Application: for stainless (VA) and other high‑strength steels
• Compatible with Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas circular saw machines

FAQ

What materials is this saw blade suited for?
This TECWERK HSS‑Co circular metal saw blade is designed for stainless steel and other high‑strength steels, with a vapour‑treated coating to reduce adhesion during cutting.

Which machines will accept this blade?
The blade’s 32 mm bore and auxiliary hole pattern match a range of industrial circular sawing systems, including Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas machines.

How does the BW tooth geometry affect finish?
The BW (bow tooth with alternating bevel) geometry, together with the fine tooth count, delivers a smoother edge and lower burr formation, reducing the need for secondary finishing.

What are the key dimensions to check before ordering?
Confirm the 250 mm diameter, 32 mm bore, 2.0 mm kerf and the auxiliary hole pattern to ensure proper mounting and secure fixation.

Can the vapour‑treated coating be expected to extend tool life?
Yes, the vapour treatment helps prevent material build‑up and improves chip evacuation, which contributes to longer effective cutting life and more stable operation.

Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund