350mm Metal Circular Saw Blade BW Tooth 220 Teeth HSS-Co Vapour-Treated Anti-Weld 32mm Bore, 3.0mm Kerf - TECWERK

Take advantage of the combination of HSS‑Co construction, a vaporised anti‑weld coating and the fine BW tooth form for clean, repeatable cuts in stainless and high‑strength steels; order directly via Metav Werkzeuge or consult our specialists for application advice.

TECWERK Metal Circular Saw Blade — 350 mm, HSS‑Co, BW tooth, 220T

The TECWERK metal circular saw blade is designed for precision cutting of stainless and other high‑strength steels on industrial circular sawing machines, offering reduced material adhesion and consistent edge quality.

• High‑speed HSS‑Co construction
• Vapourised anti‑weld coating
• 350 mm diameter, 32 mm bore
• 220 fine teeth, BW tooth form

Precision cutting performance for demanding steels

The HSS‑Co composition (cobalt‑alloyed high‑speed steel) provides a robust cutting edge with improved hot‑hardness compared with standard high‑speed grades; this results in a stable cutting action when processing stainless and other high‑strength steels. The combination of a fine tooth count and the BW tooth form (arc tooth with alternating bevel) yields smooth chip removal and reduced burr formation, which helps to maintain part tolerances and minimise secondary finishing. For users unfamiliar with the term, BW denotes a tooth geometry optimised for thin‑kerf, high‑quality metal cutting, delivering clean kerf surfaces and predictable feed behaviour.

Less adhesion, longer productive runs

A vaporised coating on the blade acts as a protective barrier against material build‑up and welding of chips to the cutting edge. In practice, this reduces interruptions for cleaning and preserves the rake geometry for longer periods, contributing to steadier cut quality over extended runs. When paired with the cobalt alloy body, the coating supports a consistent surface finish on stainless steel workpieces and other tough alloys. For workshops seeking reduced downtime and fewer blade changes, this treatment translates into improved process reliability and a lower frequency of maintenance interventions.

Machine compatibility and secure mounting

The blade features a 32 mm central bore and an array of auxiliary holes (2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm) to suit clamping arrangements used on many industrial circular saw machines. It is specified for use on brands such as Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas, allowing straightforward retrofitting in production lines and bespoke sawing cells. The 3.0 mm blade width ensures an efficient balance between rigidity and kerf size, helping to reduce material waste while maintaining the mechanical stability required for precise cuts.

Practical considerations for everyday workshop use

This cutting tool is supplied as a single unit and is optimised for metalworking environments where stainless and high‑strength steels are processed. The fine tooth count (220) and a 5 mm pitch support tight surface tolerances and minimal edge deformation. Operators should verify machine speeds and feeds appropriate for HSS‑Co tooling and the chosen workpiece material; correct operating parameters will ensure the coating and alloy deliver their intended benefits. Routine inspection for wear and periodic cleaning of the tooth gullets will sustain cutting performance and reduce the likelihood of thermal or mechanical damage.

For availability, exact machine compatibility checks or tailored cutting parameter advice for the TECWERK HSS‑Co 350 mm metal circular saw blade (SKU 2000814223NW), please contact Metav Werkzeuge—info@metav-werkzeuge.com | +49 2822 7131930 — our specialists will assist with application guidance and supply options

Technical data

• Article number: 2000814223NW
• Label: Metallkreissägeblatt Form BW D.350mm B.3,0mm HSS‑Co Bohr.‑D.32mm Z.220 TECWERK
• Manufacturer: TECWERK
• Product type: Metal circular saw blade

Facts

• Diameter: 350 mm
• Bore diameter: 32 mm
• Blade width: 3.0 mm
• Teeth: 220
• Pitch: 5

Special features

• Material: HSS‑Co (cobalt‑alloyed high‑speed steel)
• Coating: vapourised (anti‑weld protection)
• Tooth form: BW (arc tooth with alternating bevel)
• Auxiliary holes: 2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm
• Packaging unit: 1
• Recommended for: stainless steel and other high‑strength steels
• Compatible with: Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas circular saw machines

FAQ

What materials is this blade suitable for?
The TECWERK metal circular saw blade is intended for stainless steel and other high‑strength steels; the HSS‑Co alloy and vapourised coating reduce adhesion and support clean cuts in these materials.

Which machines will accept the 32 mm bore and mounting pattern?
The blade’s 32 mm bore and auxiliary hole pattern are compatible with many industrial circular saws, including models from Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas, allowing direct mounting in standard machine fixtures.

How does the vapourised coating improve cutting performance?
The vapourised coating acts as a protective layer to reduce material welding to the teeth during cutting; combined with the HSS‑Co substrate, it helps preserve edge geometry and extend effective run lengths.

Can the blade be resharpened, and what maintenance is recommended?
The HSS‑Co construction permits professional resharpening; regular cleaning of gullets and inspection for wear are recommended to maintain the blade’s cutting geometry and finish.

Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund