2.00mm Centre Drill DIN 333 Form R 60° Angle HSS Right-Hand, No Countersink - TECWERK

Compact choice for reliable centring: high-speed steel construction, 60° countersink and a 5 mm shank combine for consistent centre-hole formation; order directly via Metav Werkzeuge or request advice from our consultants for application-specific guidance.

Centre drill DIN 333 Form R D 2.00 mm HSS – TECWERK with 60° countersink

The Centre drill DIN 333 Form R D 2.00 mm HSS is a precision centring tool for the production of centre holes to DIN 332 Sheet 1 Form R (with radius), suitable for general workshop and industrial use.

• HSS construction for long tool life
• DIN 333 Form R for standardised centring
• 60° countersink for reliable location
• 5 mm shank for common toolholders

Accurate centring with standard geometry for process reliability

The DIN-compliant geometry ensures repeatable results: DIN 333 Form R combines a radiused pilot with a 60° countersink, giving a defined seating for subsequent turning or drilling operations. This standardised shape reduces run-out and contributes to predictable toolpaths, which in turn lowers scrap rates and rework. The 60° angle is widely accepted for lathe centres and centre holes, so integrating this tool into existing workflows preserves machine setup times and improves part consistency. The product name appears here as a clear reference to the tool’s specification.

Robust HSS body for consistent performance and cost-efficiency

Made from HSS, the tool resists wear under common workshop conditions while retaining sharpness for longer intervals, delivering a favourable cost-per-hole metric compared with lower-grade alternatives. The 5 mm shank suits small collets and toolholders, enabling secure clamping and stable rotation. With a right-hand cutting direction and a recommended feed of 0.02 mm/rev in steel up to 800 N, the centring operation is efficient and controllable, helping to maintain cycle times without compromising precision. The TECWERK designation underlines manufacture to recognised workshop standards.

Easy integration and clear handling guidance for workshop use

The execution without protective countersink keeps the tool profile focused on producing the required centre geometry rather than adding chamfers; this can be advantageous where a clean, radiused pilot is required for turning centres or drill starts. The compact overall length and measured dimensions make the tool suitable for bench-top and machine-mounted applications. For workshops seeking dependable centring performance, the combination of standard geometry, HSS material and defined feed guidance delivers an efficient, low-risk way to improve process reproducibility while keeping tool changes straightforward.

Contact Metav Werkzeuge for specification support or to order the TECWERK centre drill — Metav Werkzeuge can advise on suitability and supply directly from Emmerich (info@metav-werkzeuge.com | +49 2822 7131930)

Technical data

• Article number: 2000861951NW
• Manufacturer: TECWERK
• Product type: Centre drill
• Label: Zentrierbohrer DIN 333 Form R D.2mm HSS re.TECWERK

Core specifications

• Diameter: 2.00 mm
• Overall length: 40 mm
• Shank diameter: 5 mm
• Countersink angle: 60°
• Feed in steel up to 800 N: 0.02 mm/rev
• Packaging unit: 5

Features & applications

• Material: HSS
• Form: R (with radius)
• Standard: DIN 333
• Cutting direction: right-hand cutting
• Execution: without protective countersink
• Application: manufacture of centre holes to DIN 332 Sheet 1 Form R

FAQ

What materials can this centre drill be used with?
The TECWERK centre drill, made from HSS, is suited to general workshop materials; for steel the recommended feed is 0.02 mm/rev up to 800 N, offering good wear resistance for typical ferrous and non-ferrous uses.

How does Form R differ from other centre drill forms?
Form R includes a radiused pilot that produces a rounded entry according to DIN 332 Sheet 1 Form R; this provides a reliable seating for centres and helps reduce stress concentrations compared with sharp-cornered pilots.

Which toolholders accept the 5 mm shank?
A 5 mm shank fits small collets and standard mini toolholders used on compact lathes and milling spindles, enabling secure clamping for precise centring operations.

Is the 60° countersink suitable for lathe centre points?
Yes, the 60° angle is the common standard for centre holes and offers a correct seating geometry for conventional lathe centre tips.

Why is there no protective countersink on this execution?
The execution without protective countersink leaves the geometry optimised for pure centre-hole formation and radiused pilots; this is advantageous when a clean centre entry is required for subsequent machining steps.

Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund