10mm Machine Reamer H7 Form B Right-Hand Spiral With Morse Shank For Steel GGG Non-Ferrous - TECWERK

Take advantage of carbide construction, DIN 8094 H7 tolerance and a Morse taper MT1 shank for consistent hole accuracy and reliable machine mounting; order the reamer directly via Metav Werkzeuge or consult our specialists for application advice.

Machine reamer DIN 8094 H7 Form B, 10 mm, carbide, MT1 – TECWERK

A machine reamer DIN 8094 H7 Form B, 10 mm designed for precision hole finishing in steel, ductile iron and non‑ferrous metals on conventional and CNC machines

• Carbide construction for long tool life
• DIN 8094 H7 tolerance for precision holes
• Spiral fluted with left‑hand helix for chip control
• Morse taper MT1 shank for secure machine mounting

Consistent, measurable hole accuracy for assembly fits

The combination of DIN 8094 standard geometry and H7 tolerance ensures repeatable clearance and interference fits where dimensional certainty is essential. The tool’s geometry reduces the need for secondary finishing and lowers rework rates, providing a quantifiable improvement in process reliability. Where tight tolerances are specified, this reamer delivers consistent diameters that integrate directly into assembly processes, supporting predictable interchangeability and minimised stoppages.

Controlled chip evacuation and improved surface quality

A spiral fluted, left‑hand helix design together with a right‑cutting direction promotes steady chip formation and evacuation, reducing friction at the cutting edge and supporting a superior bore finish. The flute geometry is engineered to avoid smearing on aluminium and other soft metals while maintaining stability in steel and cast alloys. The result is a smoother internal surface and reduced need for polishing, which shortens cycle times and enhances component appearance and function.

Robust mounting and versatile material capability

Fitted with a Morse taper MT1 shank, the reamer allows secure, concentric mounting in machines equipped for taper‑held tooling, enabling stable high‑precision runs. Carbide (HM) construction provides the hardness required for demanding reaming tasks across steel, ductile iron (GGG) and non‑ferrous metals, offering a balance between wear resistance and cutting edge stability. This versatility makes the tool suitable for mixed‑material production runs without frequent tool changes.

Durable design that supports productive shop workflows

The Form B configuration, combined with solid carbide cutting material, delivers extended service life under typical production conditions while maintaining dimensional integrity. The right‑cutting orientation supports conventional spindle directions, and the overall design reduces tool deflection during use. For workshops aiming to improve throughput with fewer tool changes, this reamer offers an economical route to higher uptime and predictable output quality.

For precise finishing and dependable supply of the TECWERK machine reamer with Morse taper MT1, contact Metav Werkzeuge in Emmerich for tailored technical advice and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930

Technical Data

• Article number: 2000865775NW
• Label: Machine reamer DIN 8094 H7 Form B 10 mm HM MT1 TECWERK

Facts

• Diameter: 10 mm
• Tolerance: H7
• Standard: DIN 8094
• Form: B
• Right‑cutting
• Spiral fluted, left‑hand helix
• Shank: Morse taper MT1
• Material: carbide (HM)
• Suitable for: steel; GGG (ductile iron); non‑ferrous metals

Special features

• With Morse taper shank
• Spiral flutes for chip evacuation
• For machining steel, GGG and non‑ferrous metals
• Packaging unit: 1

FAQ

What tolerance does the reamer achieve and why is that important?
The reamer conforms to H7 tolerance on holes according to DIN 8094, which guarantees repeatable diameters suitable for standard fits; the TECWERK machine reamer is specified for consistent assembly accuracy.

Which materials can be machined with this reamer?
The reamer is intended for steel, GGG (ductile iron) and non‑ferrous metals; the carbide construction provides wear resistance across these materials while preserving the bore finish.

How is the reamer mounted in the machine spindle?
Mounting is by Morse taper MT1 shank, enabling secure, concentric holding in suitable taper receptacles for both conventional and CNC setups.

Does the flute geometry affect surface finish?
Yes — the spiral fluted design with left‑hand helix helps to control chip flow and reduce friction, which contributes to an improved internal surface and fewer secondary finishing operations.

Is this tool suitable for high‑volume production?
The carbide (HM) construction and Form B geometry provide durable cutting edges and dimensional stability, making the TECWERK machine reamer (SKU 2000865775NW) appropriate for repetitive production tasks with consistent results.

Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund