10mm Solid Carbide Spot Drill 90° For Precision Spotting, Centre and Chamfering Of High-Strength Steel And Non-Ferrous Metals, 0.11mm/rev Feed - TECWERK

Benefit from high first‑pass accuracy and reduced setup time thanks to the 90° point and solid carbide construction; the combined centring and chamfering capability streamlines cycles for reliable production. Order the NC spot drill directly via Metav Werkzeuge or ask our consultants if needed.

TECWERK NC spot drill D.10 mm — solid carbide, 90° centring point

The TECWERK NC spot drill D.10 mm is a solid carbide tool engineered for position‑accurate spot drilling and simultaneous chamfering on NC machines and drilling centres

• Solid carbide body for high rigidity and life
• Cylindrical shank to DIN 6535‑HA for secure clamping
• 90° point for precise centring and chamfering
• Optimised for high‑strength steels and stainless steels

Shorter cycles through combined centring and chamfering

The 90° centring point permits exact centring and a clean chamfer in a single pass, which reduces cycle time and lowers tool changes. Using a single operation to create a pilot and chamfer removes one machining step and minimises handling, improving throughput on automated lines. The reduced need for re‑alignment also cuts the cumulative variation in hole position, supporting consistent hole geometry for subsequent tapping or reaming.

Robust solid carbide design for demanding materials

Made from solid carbide, the tool offers stiffness and wear resistance essential for machining tougher alloys. The geometry and grade are selected to handle high‑strength steels, cast steel, grey cast iron, stainless steels and a range of non‑ferrous metals. In practical terms, this means extended tool life under intermittent NC operation and fewer interruptions for tool change, which supports stable production and predictable maintenance planning.

Secure clamping and machine compatibility for repeatable results

The cylindrical shank to DIN 6535‑HA ensures a consistent fit in standard collets and chucks, reducing runout and vibration at high spindle speeds. The right‑hand cutting geometry provides conventional chip flow for common machine setups. Designed specifically for spot drilling on NC machines and drilling centres, the tool maintains positional accuracy even when used in automated tool changers and multi‑operation programmes.

Practical machining data and application tips

For robust centring in steel, a feed setting equivalent to the specified parameter under load is recommended; the tool is rated for a feed in steel up to the stated force with an effective feed of 0.11 mm/rev at loads up to 800 N. The single‑pass centring and chamfering approach reduces fixture time and is particularly beneficial where hole position and chamfer quality must be controlled before threading. The combination of solid carbide body and the right‑hand cutting profile balances cutting performance with surface integrity.

Contact Metav Werkzeuge for tailored advice on TECWERK solid carbide NC spot drills and reliable supply from Emmerich — info@metav-werkzeuge.com | +49 2822 7131930

Technical data

• Article number: 2000865806NW
• Product: NC spot drill D.10 mm
• Manufacturer: TECWERK
• Packaging unit: 1

Core data

• Diameter: 10 mm
• Point angle: 90°
• Feed in steel (≤800 N): 0.11 mm/rev
• Shank standard: DIN 6535‑HA

Special features

• Solid carbide (VHM)
• Cylindrical shank to DIN 6535‑HA
• Right‑hand cutting
• For position‑accurate, fast spot drilling on NC machines and drilling centres
• Centring and chamfering of threaded holes in one pass
• Suitable for high‑strength steels, cast steel, grey cast iron, stainless steels, non‑ferrous metals

FAQ

What materials is this spot drill suitable for?
The TECWERK NC spot drill D.10 mm is suitable for high‑strength steels, cast steel, grey cast iron, stainless steels and a range of non‑ferrous metals.

Can the tool perform centring and chamfering in a single operation?
Yes — the 90° point is designed to centre and chamfer threaded holes in one pass, reducing cycle time and the need for secondary operations with the TECWERK NC spot drill (SKU 2000865806NW).

What shank standard is required for secure clamping?
The tool uses a cylindrical shank to DIN 6535‑HA, ensuring reliable clamping in compatible collets and chucks for repeatable runout performance.

What feed value is recommended for steel applications?
The data specifies an effective feed of 0.11 mm/rev in steel under loads up to 800 N; adjust cutting parameters according to machine rigidity and workpiece setup.

Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com