6mm Solid Carbide NC Spot Drill TiAlN Coated 90° For High-Strength Steels And Cast Irons, 0.09mm/rev - TECWERK

High-precision starts and reliable chamfering are combined in a compact tool: the solid-carbide, TiAlN-coated 6 mm tip and 90° geometry ensure fast, repeatable positioning on CNC machines and boring mills. Order the tool directly via Metav Werkzeuge or ask the consultants for application advice.

TECWERK NC spot drill D.6 mm — solid carbide, TiAlN, 90°

A TECWERK NC spot drill D.6 mm VHM TiAlN 90° designed for accurate spot drilling, centring and single-pass chamfering on CNC machining centres and boring mills

• Solid carbide with TiAlN coating for wear resistance
• 90° geometry for reliable centring and chamfering
• Cylindrical shank to DIN 6535-HA for secure clamping
• Optimised feed: 0.09 mm/rev in steel up to 800 N

Faster, more accurate starts for production runs

The combination of a solid carbide body and TiAlN coating gives a consistently sharp point and excellent thermal resistance, which translates into shorter set-up times and fewer rejects. The 90° tip geometry is optimised for true centring and dependable chamfer edges, reducing the need for subsequent finishing passes. For batch production on CNC machines and boring mills, this means higher first-pass accuracy and more predictable cycle times. The tool’s right-hand cutting profile maintains stable chip formation during the initial contact, helping to protect both spindle and workpiece.

Robust construction for demanding materials

Built to cope with a wide range of workpiece alloys, the spot cutter is particularly suited to high-strength steels, steel casting, grey cast iron, stainless steel and non-ferrous metals. The TiAlN coating increases surface hardness and oxidation resistance at elevated temperatures, so the cutter holds its edge when working harder materials. This results in reduced wear and longer tool life under tough conditions, making it a suitable choice when working with challenging job lots where consistency matters.

Secure clamping and reliable machining parameters

The cylindrical shank to DIN 6535-HA ensures repeatable clamping in standard toolholders, avoiding wobble and runout that would compromise hole position. The specified feed guidance — 0.09 mm/rev in steel at up to 800 N — provides a practical starting point for process planning and shows the tool is optimised for controlled penetration rather than aggressive drilling. By following the recommended feeds and using a rigid set-up, the tool delivers precise centring and a clean chamfer in a single operation, cutting cycle time and handling steps.

Designed for integration into production workflows

As a compact spot-drilling solution, the tool supports workflow efficiency: centring and chamfering in one pass reduces tool changeovers and eliminates a secondary operation, while the carbide construction and coating cut down maintenance intervals. For engineering teams seeking dependable repeatability, the tool offers a pragmatic balance of precision and durability. Technical staff unfamiliar with some terms can note that “TiAlN” denotes a high-temperature aluminium nitride coating and “VHM” indicates solid carbide, both standard terms in cutting-tool selection.

For reliable centring and single-pass chamfering, choose the TECWERK NC spot drill — contact Metav Werkzeuge for tailored advice and order facilitation at info@metav-werkzeuge.com or call +49 2822 7131930

Technical data

• Article number: 2000865813NW
• Designation: NC spot drill D.6 mm, solid carbide, TiAlN, 90°
• Manufacturer: TECWERK

Core specifications

• Diameter: 6 mm
• Point angle: 90°
• Feed guidance: 0.09 mm/rev in steel (up to 800 N)
• Shank: Cylindrical to DIN 6535-HA
• Cutting direction: Right-hand

Materials & special features

• Material: Solid carbide (VHM)
• Coating: TiAlN
• Application: Spot drilling, centring and chamfering in one pass
• Suitable for: High-strength steels, steel casting, grey cast iron, stainless steel, non-ferrous metals
• Packaging unit: 1

FAQ

Is this spot drill suitable for stainless steel applications? Yes. The TECWERK NC spot drill D.6 mm with TiAlN coating is designed for stainless steel and other demanding alloys, offering improved wear resistance under elevated temperatures.

Can the tool centre and chamfer a threaded hole in a single operation? Yes. The geometry and cutting design enable centring and chamfering of thread holes in one pass, reducing cycle time and tool changes.

What shank standard does the tool use for clamping? The tool features a cylindrical shank to DIN 6535-HA for secure and repeatable clamping in standard holders.

What feed rate should be used as a starting point? A practical starting guide is 0.09 mm/rev in steel up to 800 N as indicated for the tool; adapt feeds according to machine stability and material batch.

How is the product identified for ordering? Order reference: SKU 2000865813NW — described as the TECWERK NC spot drill D.6 mm VHM TiAlN 90°

Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com