10mm NC Spot Drill Solid Carbide TiAlN Coated 90° For High-Strength Steel, Cast Iron, Stainless Steel, Non-Ferrous - TECWERK

Take advantage of the combination of fast, positions-accurate spot-drilling and integrated chamfering for fewer operations and shorter cycle times; order the tool via Metav Werkzeuge or consult the sales team for application advice.

NC spot drill D.10mm solid carbide TiAlN 90° TECWERK — 90° point, TiAlN-coated spot drill for NC machines

The NC spot drill D.10mm solid carbide TiAlN 90° is designed for positions-accurate spot‑drilling, centring and chamfering of threaded holes in a single pass on NC machines and drilling centres

• Solid carbide, TiAlN coating, 90° point
• Cylindrical shank to DIN 6535‑HA
• Centring and chamfering in one operation
• Suited to high-strength steels and stainless

Reduce cycle times with combined centring and chamfering

The 90° geometry of the tool reduces the number of setup steps by allowing centring and chamfering in a single operation, which translates into measurable time savings on batch production. The slim process chain is especially valuable in automated NC environments where each tool change or reposition costs valuable seconds. Built for rapid, positions‑accurate starts, this design minimises runout and improves repeatability on workpieces requiring precise hole location, which contributes to smoother downstream thread tapping and assembly.

Robust cutting performance for demanding alloys

Manufactured from solid carbide and finished with a TiAlN coating, the tool offers enhanced wear resistance and thermal stability in elevated cutting temperatures. This makes it particularly effective on high‑strength steels, steel castings and stainless steels, while remaining tolerant of many non‑ferrous materials. The coating reduces built‑up edge and prolongs service life under intermittent heavy loads, supporting consistent hole quality over multiple cycles and lowering the risk of premature tool change.

Machine-ready design for straightforward integration

The cylindrical shank conforms to DIN 6535‑HA, ensuring compatibility with standard collets and holders used across modern CNC drilling centres. Right‑hand cutting geometry and a short point length facilitate reliable chip evacuation during spot‑drilling operations on NC machines, reducing the likelihood of chatter and improving centring precision. The combination of standardised shank and predictable cutting behaviour makes the tool an efficient choice for production lines and job shops seeking straightforward retrofitting.

Practical machining data and handling guidance

A concrete feed reference is provided for shop planning: 0.11 mm/rev in steel at cutting forces up to 800 N serves as a starting point for process development. The right‑hand cutting action delivers conventional chip flow and is suitable for typical clockwise spindle rotation; adjustments to feed and speed should be validated on the specific machine and material. For optimal results, consider clamping rigidity, coolant strategy and the following of application‑specific parameters to preserve edge life and maintain consistent hole geometry.

For reliable supply and application support, obtain the TECWERK NC spot drill via Metav Werkzeuge — Metav Werkzeuge provides stock availability from Emmerich and technical advice at info@metav-werkzeuge.com or +49 2822 7131930

Technical Data

• Article number: 2000865815NW
• Label: NC spot drill D.10mm solid carbide TiAlN 90° TECWERK
• Manufacturer: TECWERK
• Packaging unit: 1
• UID: 2000865815NW

Facts

• Diameter: 10 mm
• Point angle: 90°
• Feed in steel up to 800 N: 0.11 mm/rev
• Packaging unit: 1

Special features

• Solid carbide body
• TiAlN coating
• Cylindrical shank to DIN 6535‑HA
• Right‑hand cutting
• Designed for positions‑accurate spot‑drilling on NC machines and drilling centres
• Centring and chamfering of threaded holes in one pass
• Suitable for high‑strength steels, steel castings, grey cast iron, stainless steels and non‑ferrous metals

FAQ

What materials is this spot drill suitable for?
The NC spot drill D.10mm solid carbide TiAlN 90° from TECWERK is suitable for high‑strength steels, steel castings, grey cast iron, stainless steels and a range of non‑ferrous metals.

Does the shank fit common holders and collets?
Yes — the tool has a cylindrical shank to DIN 6535‑HA, so it is compatible with standard collets and holders that accept this shank form.

What benefit does the TiAlN coating provide?
The TiAlN coating increases heat resistance and wear protection, extending tool life under elevated temperatures and reducing the tendency for built‑up edge during repeated spot‑drilling cycles.

Can centring and chamfering really be done in one operation?
Yes; the geometry of the TECWERK NC spot drill is engineered to allow centring and chamfering of threaded holes in a single pass, reducing cycle time and eliminating a separate chamfering step.

Which feed value should be used as a baseline?
A recommended baseline for steel is 0.11 mm/rev (at cutting forces up to 800 N); final parameters should be adjusted to machine rigidity, material batch and coolant practice

Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com