10mm Solid Carbide NC Spot Drill 120° Right-Hand Cylindrical Shank h6, DIN 6535-HA - TECWERK

Take advantage of the combination of solid‑carbide construction, a 120° centring tip and a DIN‑compliant cylindrical shank for reliable, repeatable positioning and one‑pass chamfering; order directly via Metav Werkzeuge or consult the technical team for application advice.

NC spot drill D 10 mm — solid‑carbide, 120° tip (TECWERK)

The NC spot drill D 10 mm is a solid‑carbide centre drill designed for precise locating, centring and chamfering on NC machines and drilling centres in industrial production environments.

• Solid‑carbide, 120° tip for precise centring
• Zylindrical shank to DIN 6535‑HA fit
• Suitable for high‑strength steel and stainless steel
• Fast spot‑drilling with 0.11 mm/rev feed in steel

Fewer operations, faster cycle times with combined centring and chamfering

The solid‑carbide construction and 120° tip enable accurate initial contact and stable run‑in, so drilling cycles can begin with consistent centre points. The tool performs centring and chamfering in a single pass, which reduces the need for separate operations and shortens overall cycle time. For manufacturers aiming to improve throughput, this means fewer tool changes and reduced spindle time while maintaining repeatable hole positioning. The right‑hand cutting geometry supports conventional NC machining strategies and predictable chip evacuation.

Robust geometry and materials for demanding workpieces

Manufactured from solid carbide (VHM), the tool offers stiffness and wear resistance suited to tougher materials. It is specifically indicated for high‑strength steels, steel castings and stainless steels, as well as grey cast iron and non‑ferrous metals; the combination of material and tip geometry ensures edge strength at start‑up. The specified feed capability of 0.11 mm/rev in steel (up to 800 N) provides a reference for setting machining parameters, balancing productive feed rates with tool life. The h6 diameter tolerance and rigid shank reduce run‑out, improving hole quality where positional accuracy is required.

Compatibility with NC setups and secure toolholding

The cylindrical shank conforms to DIN 6535‑HA, ensuring direct compatibility with standard collets and holders used on NC machines and drilling rigs. This standard shank form simplifies tool changeover and guarantees concentric clamping, which supports the precise positioning demands of series production. The tool is optimised for spot‑drilling and chamfering cycles commonly programmed into manufacturing cells, enabling integration into automated work flows and contributing to consistent first‑pass quality.

Contact Metav Werkzeuge for application guidance or to request detailed machining parameters for this TECWERK NC spot drill D 10 mm — Metav Werkzeuge can advise on toolholders, feeds and speeds from their Emmerich facility

Technical Data

• Article number: 2000865824NW
• Product: NC spot drill D 10 mm, 120° tip
• Material: Solid carbide (VHM)
• Standard: DIN 6535‑HA
• Manufacturer: TECWERK

Core data

• Diameter: 10 mm
• Overall length: 70 mm
• Spiral length: 24 mm
• Tip angle: 120°
• Diameter tolerance: h6
• Packaging unit: 1
• Feed in steel (≤ 800 N): 0.11 mm/rev
• Cutting direction: Right‑hand cutting

Applications / Special features

• Precise and fast spot‑drilling on NC machines and drilling centres
• Centring and chamfering of tapped holes in one operation
• Particularly suitable for high‑strength steels, steel castings, grey cast iron
• Also suitable for stainless steels and non‑ferrous metals
• Cylindrical shank for secure clamping and repeatability

FAQ

What materials can this spot drill machine reliably handle?
The tool is suitable for high‑strength steels, steel castings, grey cast iron, stainless steels and various non‑ferrous metals; these applications are specifically referenced for the TECWERK NC spot drill D 10 mm.

How is the tool clamped in common NC spindles?
The cylindrical shank complies with DIN 6535‑HA, allowing secure clamping in standard collets and holders used on NC machines and drilling centres.

What are the recommended feed conditions for steel applications?
A reference feed of 0.11 mm per revolution in steel (up to 800 N) is provided as a baseline for setting machining parameters when using this spot drill.

Can the spot drill centre and chamfer in a single pass?
Yes, the geometry of the tool is designed to perform centring and chamfering in one operation, reducing cycle time and the number of tool changes.

Is the tip geometry suitable for repeatable hole positioning?
The 120° tip combined with solid‑carbide construction and h6 tolerance delivers stable run‑in and repeatable positioning for series production.

Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund