10mm Milling Cutter for Boring Grooves, Solid Carbide TiAlN Coated, 2 Flutes, DIN 6527 - TECWERK

Take advantage of the combination of solid carbide construction, TiAlN coating and a vibration‑reduced short design to keep machining stable and cost‑effective; order the tool via Metav Werkzeuge or consult our technical team for application advice.

TECWERK Slot Drill DIN 6527K Type N — 10 mm, Solid Carbide, TiAlN

The TECWERK slot drill is a short, 10 mm solid carbide tool with TiAlN coating, designed for vibration‑reduced slotting and finishing across steels, castings and non‑ferrous materials.

Solid carbide (VHM) for high stiffness
TiAlN coating for heat resistance
2‑flute short design for stable slotting
Suitable for steels and non‑ferrous metals

Improved productivity through engineered geometry

The combination of solid carbide body and a TiAlN surface finish provides a balance of rigidity and thermal stability that raises achievable cutting speeds while maintaining tool life. The centre cutting geometry permits plunging and slot entry, reducing cycle time on interrupted cuts. A dynamic helix and 45° protection chamfer ensure predictable chip flow and secure cutting edges, so the cutter handles both roughing and finishing without frequent tool changes.

Broad material compatibility reduces tool inventory

Thanks to its universal geometry and protective coating, the cutter is rated very well suited for steels, stainless (Cr‑Ni) steels, cast iron variants and a wide range of non‑ferrous alloys, including aluminium with silicon content and abrasive materials. This versatility cuts procurement complexity and supports continuous production: a single short tool can replace multiple specialised cutters in many standard workshop scenarios, improving throughput and lowering handling time.

Precision shank and vibration control for consistent results

A cylindrical shank to DIN 6535 HB with h6 shank tolerance guarantees concentric clamping and low runout in modern toolholders. The tool’s neck relief and optimised flute geometry provide vibration‑reduced cutting, which minimises chatter marks and improves surface finish even in interrupted or deep slotting operations. Key dimensions such as an overall length of 66 mm, effective length 24 mm and relief length 9.5 mm support reliable setup and reproducible machining across fixtures.

Practical machining notes and application support

Designed as a short, two‑flute cutter with a small protection chamfer (0.2 mm), the tool is intended for secure entry and stable slot creation under moderate to high cutting speeds. The right‑hand cutting direction aligns with standard milling setups and the centre‑cut capability simplifies plunging operations. For specific spindle speeds, feeds and coolant strategies tailored to a given material and machine, Metav’s consultants can provide application data and optimisation tips to help integrate the cutter into existing processes.

Contact Metav Werkzeuge for personalised application advice on the TECWERK slot drill and to arrange sample runs or technical consultation: info@metav-werkzeuge.com • +49 2822 7131930

Technical data

• Article number: 2000866161NW
• Name: Bohrnutenfräser DIN 6527K Typ N, 10 mm, VHM, TiAlN
• Standard: DIN 6527
• Manufacturer: TECWERK

Dimensions & core data

• Diameter: 10 mm
• Shank diameter: 10 mm
• Overall length: 66 mm
• Effective length: 24 mm
• Relief length: 9.5 mm
• Number of flutes: 2
• Protection chamfer: 0.2 mm
• Shank tolerance: h6
• Cutting direction: right‑hand

Materials & special features

• Material: solid carbide (VHM)
• Coating: TiAlN
• Centre cutting (plunge capable)
• Cylindrical shank to DIN 6535 HB
• 45° protection chamfer
• Dynamic helix for controlled chip evacuation
• Neck relief for vibration‑reduced machining
• Suitable for steel, stainless, cast iron, non‑ferrous and abrasive materials
• Short design for stable slotting and finishing

FAQ

Is this cutter suitable for plunge milling?
Yes. The TECWERK slot drill features a centre‑cutting geometry that allows controlled plunging and direct slot entry.

Which materials can be machined with this tool?
The tool is very well suited for steels, stainless (Cr‑Ni) steels, cast iron, non‑ferrous metals and aluminium with silicon content, as stated in the technical specification.

What does the TiAlN coating provide?
The TiAlN coating increases surface hardness and thermal resistance, improving wear performance at elevated cutting temperatures and extending tool life in demanding operations.

How does the shank tolerance affect performance?
A h6 shank tolerance with DIN 6535 HB shank geometry ensures tight concentricity in the holder, reducing runout and improving surface finish and tool life.

Can this cutter be used for both roughing and finishing?
Yes. The combination of dynamic helix, short design and protective chamfer makes the cutter suitable for vibration‑reduced roughing as well as fine finishing passes.

Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund