M24x3mm Hand Tap HSS ISO2 (6H) DIN 352, 18mm Shank - TECWERK

Take advantage of a combination of durable HSS construction, ISO2 (6H) tolerance and a standard shaft diameter for reliable manual threading; order the tap directly via Metav Werkzeuge or request specialist advice for application-specific guidance.

TECWERK Hand Tap DIN 352 No. 3 – M24 x 3 mm, HSS, ISO2 (6H)

A TECWERK Hand Tap DIN 352 No. 3 M24 x 3 mm designed for manual production of metric ISO threads in medium-strength steels and general workshop use

• High-speed steel (HSS) cutting material
• ISO2 (6H) tolerance for accurate fits
• Suitable for steels up to approx. 900 N/mm²
• DIN 352 geometry with 18 mm shank

Consistent cutting performance for routine threading

The TECWERK hand tap combines a high-quality HSS cutting material with proven geometry to deliver reliable results in everyday threading tasks. The HSS composition provides a balance of toughness and wear resistance, which means longer service life when used within its recommended application range. With the ISO2 (6H) tolerance, internal threads achieve a predictable fit suitable for mechanical assemblies where standardised clearances are required. This performance-focused design reduces rework and downtime in production and maintenance environments.

Practical compatibility for workshop tools and holders

Machining set-up is simplified by the standard shaft Ø 18 mm, which allows the tool to be held securely in common tap wrenches and adaptors. The M24 x 3 mm metric pitch corresponds to DIN 13 Blatt 1, making the tap directly compatible with standardised metric systems. The right-hand cutting direction follows conventional thread orientation, so the tool integrates with existing processes without special tooling changes. These compatibility features support quick changeovers and predictable results in mixed-tool workshops.

Why the technical choices matter for everyday use

Choosing HSS over softer materials ensures the tap withstands intermittent shock loads and resists chipping during hand operation. The ISO2 tolerance (6H) indicates the internal thread tolerance field and provides guidance on mating fasteners and assembly clearances; this is particularly important when parts are produced in several batches or with different machines. The specification to handle steels up to approximately 900 N/mm² gives a clear limit for application: harder materials or specialised alloys will require different grades or coatings. Understanding these technical parameters avoids misuse and extends tool life.

Suitable applications and workshop benefits

This tap is aimed at maintenance technicians, metalworkers and small production shops that require dependable manual threading of metric components. Typical uses include retrofitting parts, preparing threaded holes for bolts, and one-off production runs where machine tapping is not practical. The tool’s standardisation and robust material make it a pragmatic choice for those who value predictability: consistent thread quality, straightforward handling and compatibility with common accessories. The result is less scrap, fewer mismatches and a smoother workflow on the shop floor.

Contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and availability

Technical data

• Article number: 2000867126NW
• Manufacturer: TECWERK
• Packaging unit: 1

Facts

• Thread: M24 x 3 mm
• Shank diameter: 18 mm
• Material: HSS
• Suitable for steels up to approx. 900 N/mm²

Special features

• Standard: DIN 352
• Thread standard: DIN 13 Blatt 1
• Tolerance field: ISO2 (6H)
• Cutting direction: right-hand
• Intended use: metric ISO threads, manual tapping

FAQ

What materials can this tap be used with?
The tap is made of HSS and is specified for use with steels up to approximately 900 N/mm²; the TECWERK Hand Tap DIN 352 No. 3 M24 x 3 mm is therefore suitable for common carbon and alloy steels within that strength range.

What does ISO2 (6H) mean for my assembly?
ISO2 (6H) denotes the internal thread tolerance class; it ensures a standardised fit for mating bolts and fasteners, giving predictable clearance and interchangeability when using the TECWERK tap (SKU 2000867126NW).

How should the tap be held for manual threading?
Use a compatible tap wrench or holder that accepts an 18 mm shank; the standard shaft Ø 18 mm matches common workshop holders to provide stable manual operation.

Is this tap suitable for machine tapping?
The tool follows DIN 352 geometry for hand taps; while primarily intended for manual use, compatibility with machine use depends on the machine’s gripping system and operational parameters — consult Metav Werkzeuge for specifics.

How to extend the service life of the tap?
Correct cutting lubricant, moderate feed and avoiding materials harder than the specified limit will reduce wear; the HSS composition already offers a resilient starting point for longer life in appropriate applications.

TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund