MicrotechData LITE Android App For Data Transfer And Analysis, - Microtech Metrology

Reliable, compact hands‑free data capture that integrates with the Microtech MDS software makes measurement workflows faster and less error‑prone; the one‑button USB foot switch combines single‑button operation with straightforward Windows connectivity. Order direct via Metav Werkzeuge or consult our specialists for tailored integration advice. Microtech USB Foot Switch — 1‑button USB pedal for Windows A compact USB Foot Switch that provides single‑action measurement saving and zero setting for Windows‑based metrology setups, designed for benchtop and inspection environments. One-button operation for fast data capture USB connection compatible with Windows Saves measurements to memory or sets zero Compact footprint 60 × 60 × 20 mm Streamline measurement logging with hands‑free control The USB pedal offers a simple method to transfer measurement events without interrupting manual handling or changing grip on instruments. Linked to the Microtech MDS app, the device sends a save or zero command via a standard USB link, reducing transcription errors and speeding data collection. Thanks to the single‑button design, operators benefit from a predictable, repeatable input: the result is fewer interruptions in the measuring process and a measurable increase in throughput for routine inspection tasks. Practical compactness for busy benches and tight spaces With a footprint of 60 × 60 × 20 mm and a weight of 0.2 kg, this foot switch fits easily beside gauges, callipers or test stands without consuming valuable workspace. The small form factor simplifies placement under test rigs or alongside operator stations, so the pedal can be reached comfortably without changing posture. The reduced need to handle instruments during data capture improves repeatability and diminishes the chance of handling‑induced errors, particularly during repetitive quality checks. Clear integration with Microtech software and Windows systems The peripheral is engineered for straightforward integration: plug the pedal into a workstation running Windows and pair it with the Microtech MDS app to log measurement events or perform zero setting directly from the app interface. The device supports saving to memory via the software, which allows buffered recording where native instrument outputs are limited. For workshops standardising digital data capture, this method provides a robust, low‑effort route to create reliable logs and reduce manual entry steps. Suitable applications and operational benefits The pedal is well suited to production inspection, toolroom checks and small‑series measurement tasks where hands‑free confirmation speeds cycle times. As a dedicated input device for measurement software, it complements digital gauges and inspection routines and is particularly effective where operators must keep both hands on a part or tool. The simplified controls reduce training time and, combined with software logging, support traceability in routine quality assurance workflows. For hands‑free data capture with Microtech technology, contact Metav Werkzeuge for tailored advice and delivery from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data SKU: 299190000 GTIN: 4061905048036 Brand: Microtech Metrology Facts Dimensions: 60 × 60 × 20 mm Weight: 0.2 kg Special features USB connection for Windows 1‑button foot switch Saves data to memory via Microtech MDS app Function: save to memory or zero setting FAQ Is the pedal compatible with macOS or Linux? The Microtech USB Foot Switch is designed for use with Windows systems and the Microtech MDS app; macOS or Linux compatibility is not specified for this product. Can the device trigger a zero setting on digital callipers? Yes, the foot switch sends a zero command via the Microtech MDS interface when configured, enabling hands‑free zeroing where supported by the connected measurement setup. Does the switch store measurements independently? The pedal functions as an input device; saving to memory is managed by the Microtech MDS app, which records the events and stores measurement entries. What are the physical dimensions and how portable is the device? The unit measures 60 × 60 × 20 mm and weighs 0.2 kg, making it compact and easy to position on crowded benches or move between workstations. Is special software required to use the foot switch? The Microtech MDS app for Windows is required to access the device’s memory‑save and zero‑setting functions; basic switch operation via simple USB input may be possible where a host application recognises generic input events. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Combine high accuracy, robust stainless steel construction and a traceable ISO 17025 calibration for reliable angle measurement; order the Digital Angle Gauge directly via Metav Werkzeuge or contact our consultants for technical advice. Digital Angle Gauge — Microtech Metrology (0–360°, ISO 17025 calibrated) A Digital Angle Gauge designed for fast, repeatable 0–360° angle checks in workshops and quality control environments. ISO 17025 calibration certificate included Stainless steel construction for workshop resilience Dual-line digital display for clear readings Fine-adjustment spindle for precise alignment Precision and measurement reliability for quality control The Digital Angle Gauge offers a full 0–360° measurement range combined with a high display resolution of 0.005° and an angular accuracy of 5 arcminutes, making it suitable for demanding inspection tasks and setup work. The instrument’s metrological performance is backed by a delivered ISO 17025 calibration certificate, which ensures traceability and reduces uncertainty in documented test procedures. This technical certainty supports faster decision‑making in incoming inspection and setup stages and lowers the risk of costly rework. Robust construction that withstands everyday workshop use Built from stainless steel, the gauge balances rigidity with corrosion resistance to tolerate regular handling at the bench. The design includes a fine adjustment spindle that enables controlled approach to the measured surface, and a digital display with two reading lines for simultaneous primary and reference values. These characteristics reduce measurement wobble and make the instrument practical for repetitive angle checks on jigs, fixtures and assembly components, improving throughput without sacrificing repeatability. Faster inspection workflows and clear measurement traceability Integration of a clear digital readout and precise mechanical guidance translates into process advantages: fewer manual interpolations, shorter cycle times and better documentation during audits. The included calibration certificate documents conformity to recognised standards and simplifies quality management workflows. Where traceable records are required for supplier qualification or production release, this angle instrument supports compliance while helping to maintain consistent part quality across batches. What is delivered and how it fits into the toolbox Delivered ready for use with a full calibration report, the package supports immediate inclusion in quality procedures and measurement routines. The stainless steel construction and compact form factor make the instrument suitable for shop floors, toolrooms and inspection benches. For rapid orientation: the device is digital, features a high-resolution display and fine mechanical control for repeatable results; further technical details and identifiers are shown below. Speak to Metav Werkzeuge for a tailored quotation, delivery options from Emmerich and advice on integrating the instrument into existing inspection processes — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 151136051 GTIN: 4061905047855 Manufacturer: Microtech Metrology Digital display: Digital with 2 reading lines Calibration: ISO 17025 certificate included Core specifications Measurement range: 0–360° Resolution: 0.005° Accuracy: 5 arcminutes Display lines: 2 Measuring rails: 150 mm / 200 mm / 300 mm Materials & features Material: stainless steel Fine adjustment: yes Digital: yes Calibration certificate: ISO 17025 Category: angle measuring device FAQ What is the measurement range of the instrument? The instrument measures across a full 0–360° range, suitable for all standard angle‑checking tasks. Is a calibration certificate included with delivery? Yes, the product is supplied fully calibrated with an ISO 17025 calibration certificate, providing traceable measurement results. What resolution and accuracy can be expected during use? Resolution is 0.005° on the display and the angular accuracy is approximately 5 arcminutes, appropriate for fine setup and quality checks. Is the housing suitable for workshop environments? The gauge is made from stainless steel, offering good resistance to typical workshop conditions while maintaining structural stiffness. Which identifier should be used for ordering or documentation? Use the article number 151136051 and GTIN 4061905047855 for ordering and traceability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Take advantage of stable wireless data transfer and the option to connect multiple measuring instruments simultaneously; the Microtech Metrology USB Dongle ensures reliable integration with the Windows MDS application and includes a 1 m MDS USB extension cable. Order the adapter directly via Metav Werkzeuge or consult Metav's specialists for configuration advice. Microtech Metrology USB Dongle – wireless MDS interface, up to 50 m range A USB Dongle for secure wireless connection of Microtech measuring instruments to the MDS application on Windows, suitable for indicators, calipers, micrometers and bore gauges. Wireless MDS connection up to 50 m Standard: connects up to 3 instruments Pro: connects up to 8 instruments Includes 1 m MDS USB extension cable Reliable wireless data transfer that speeds up inspection workflows The dongle provides a stable and secure data transfer channel between workshop instruments and the Windows MDS application, reducing manual entry and the associated risk of transcription errors. With an operational range of up to 50 m, the adapter supports measurement collection across larger benches or test stations, enabling centralised logging without interrupting production flow. This wireless link is optimised for common metrology tools such as indicators, calipers, micrometers and bore gauges, so data capture becomes a seamless part of established inspection routines. Scalable connectivity to match test-rig requirements Two performance levels accommodate different setups: the STANDARD variant allows simultaneous connection of up to three instruments, while the PRO variant increases capacity to eight devices, making it easier to consolidate several gauges at a single PC. The included 1 m MDS USB extension cable facilitates flexible placement of the receiver on a bench or PC tower for better signal reception. By consolidating instrument outputs into the MDS data stream, throughput is improved and traceability is strengthened without changing measurement habits. Simple integration with focused compatibility and secure operation The adapter is intended exclusively for the MDS software on Windows and is not used with iOS, macOS, Android or HID modes; this focused compatibility avoids unnecessary complexity and ensures predictable behaviour in standardised IT environments. Installation follows a plug-and-play pattern with the MDS application, minimising setup time and training effort. The combination of a purpose-built wireless receiver and Microtech’s proven instrument protocols supports consistent measurement logging and reliable audit trails across recurring inspection tasks. For reliable Windows integration and faster measurement workflows, choose the Microtech Metrology USB dongle from Metav Werkzeuge — contact Metav Werkzeuge in Emmerich for technical guidance and ordering support: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 299190001 GTIN: 4061905048005 Brand: Microtech Metrology Category: Data transfer and software Facts Range: up to 50 m Simultaneous connections: Standard 3 / Pro 8 Extension cable length: 1 m Special features Stable and secure wireless data transfer Supports indicators, calipers, micrometers, bore gauges Required only for MDS for Windows; not used with iOS, macOS, Android or HID modes Available in STANDARD and PRO variants Includes 1 m MDS USB extension cable FAQ Which instruments are compatible with the dongle? The Microtech Metrology USB Dongle is compatible with Microtech indicators, calipers, micrometers and bore gauges and integrates their output into the MDS application. What is the effective wireless range of the receiver? The adapter supports wireless communication over distances of up to 50 m under typical workshop conditions. How many instruments can be connected at the same time? The STANDARD dongle supports up to 3 simultaneous connections; the PRO variant supports up to 8 simultaneous connections (Microtech Metrology USB Dongle, SKU 299190001). Is the dongle usable with MDS on macOS or mobile platforms? No — the USB dongle is required only for the MDS software on Windows and is not used with iOS, macOS, Android or any HID modes. Is an extension cable included with the product? Yes — a 1 m MDS USB extension cable is included in the delivery to assist with receiver placement and signal reception. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools