1 g–200 g E2 Compact Calibration Weight Set, Polished Stainless Steel, Plastic Case - KERN
€650.00
Product information "1 g–200 g E2 Compact Calibration Weight Set, Polished Stainless Steel, Plastic Case - KERN"
Take advantage of OIML Class E2 accuracy and a compact, transport-ready design for dependable mass verification in production and laboratory environments. Order the set directly via Metav Werkzeuge or consult our specialists for tailored advice.
Weight set 312-044 – KERN OIML Class E2 calibration set, 1 g–200 g, polished stainless steel
The Weight set 312-044 is a compact calibration kit designed for precise mass verification of precision balances and reference instruments in workshops and quality-control labs.
- OIML Class E2 accuracy
- 1 g–200 g nominal range
- Polished stainless steel weights
- Compact form with plastic case
High-precision calibration for reliable measurement results
The set delivers OIML Class E2 accuracy, making it suitable for calibrating precision balances where tight tolerances are required. The declared 1 g–200 g nominal range covers the most common calibration points for benchtop and laboratory scales, providing a practical span for routine verification tasks. Using a class E2 reference set reduces measurement uncertainty, supporting consistent instrument performance and regulatory compliance.
Robust materials and convenient handling reduce downtime
Each weight is made from polished stainless steel, which resists corrosion and eases cleaning, so reference masses retain their geometry and surface condition over time. The compact form minimises storage space while the moulded plastic case protects the components during transport between bench and service vehicle. This build reduces the need for frequent replacements and simplifies daily handling, contributing to lower operational interruptions.
Traceable verification and workflow efficiency
Designed by KERN, the set supports systematic verification routines and quality assurance workflows. Clear nominal markings and an ergonomic layout in the case make selection and handling straightforward, speeding up calibration cycles. By using a certified E2 reference kit, laboratories and workshops can document repeatable checks and demonstrate a measured approach to maintaining balance accuracy and product quality.
For precise calibration with KERN reliability, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for expert guidance and prompt supply
Technical data
- Article number: 312
- SKU: 312-044
- GTIN: 4045761117006
- Manufacturer: KERN
- Country of origin: DE
Facts
- Nominal range: 1 g–200 g
- Total weight: 0.94 kg
- OIML class: E2
- Tariff number: 84239090
Special features
- Material: polished stainless steel
- Form: compact form
- Case: plastic case
- Brand: KERN
FAQ
What level of accuracy does this weight set provide? The set conforms to OIML Class E2, offering high-precision reference masses suitable for routine verification of precision balances and instruments.
Is the set suitable for laboratory and workshop calibration? Yes, the KERN weight set 312-044 is designed for both laboratory and workshop use, combining accuracy with a compact, transportable design.
How are the weights protected during transport? The weights are housed in a moulded plastic case, which protects each mass from mechanical damage and contamination during handling and transport.
Can this set cover common calibration points for benchtop balances? With a 1 g–200 g nominal range, the set covers the typical calibration points required for many benchtop and precision balances.
What material are the weights made from and why is that important? The masses are made of polished stainless steel, which offers corrosion resistance and ease of cleaning, helping preserve accuracy over time.
KERN; Origin: Germany (DE); GTIN: 4045761117006; SKU: 312-044
Zubehör
Take advantage of durable, lightweight storage and organised inserts to keep calibration weights safe and accessible; the compact design supports routine handling and workshop transport. Order the plastic case directly via Metav Werkzeuge or ask our consultants if needed. Plastic case KERN 313-052-400 – Carrying case for standard calibration weight sets, up to 500 g The Plastic case KERN 313-052-400 is a compact carrying solution for standard calibration weight sets, providing organised storage and protection for weights used in precision metrology. Plastic case for standard weight sets up to 500 g Designed for weight classes E1 to M3 Compact, lightweight design for workshop transport Compatible with button/compact weight formats Secure storage that preserves calibration accuracy The robust plastic construction provides a protective outer shell that shields calibration weights from dust, knocks and moisture during storage and transit. Inside, the layout is tailored for standard subdivision sets so that each mass is held securely; this reduces the risk of surface damage and contamination that can affect measurement results. Conserving the surface integrity of calibration masses supports repeatable weighing and helps maintain traceability between calibration intervals. Organised layout for efficient handling and traceability A clearly arranged internal layout enables quick identification and removal of individual masses, which speeds up routine checks and decreases handling time. The case is specified for weight classes E1–M3 and nominal values up to 500 g, matching common calibration procedures in laboratories and workshops. By keeping sets together in a dedicated container, record-keeping and procedural compliance are simplified, which supports quality systems and audit readiness. Workshop-ready: portable, lightweight and practical With a low own weight of 0.35 kg, the case is easy to carry between bench, calibration station and storage shelf. The compact format reduces occupied space on the workbench and is convenient for mobile service technicians who require a reliable transport solution. The material resists routine workshop wear and can be wiped clean, so maintenance is straightforward and no specialist care is required to keep the case operational. Clear scope of use and compatibility guidance The design caters specifically to button/compact mass formats and standard weight sets; it is not suitable for cast weights or atypical mass geometries. This distinction matters because cast masses often require bespoke recesses or heavier-duty containment. If there is uncertainty about compatibility with a particular set, the case’s intended scope—standard subdivision, E1 to M3, up to 500 g—should be checked before purchase to ensure correct fit and continued measurement reliability. For tailored advice or to secure supply from our Emmerich warehouse, contact Metav Werkzeuge for further information and ordering assistance regarding the KERN 313-052-400 plastic case Technical data SKU: 313-052-400 GTIN: 4045761077935 Manufacturer: KERN Country of origin: Germany Facts Weight: 0.35 kg Suitable nominal values: 1 mg–500 g Weight classes: E1–M3 Special features Material: Plastic For standard weight sets (button/compact format) Not suitable for cast weights FAQ Is the case suitable for calibration weights above 500 g? The case is specified for nominal values up to 500 g; weights above this range are not covered by the internal layout and may not be held securely. Can the case be used for different weight classes? Yes, the container is designed for weight classes E1 to M3, supporting the common precision classes used in calibration laboratories. Does the case protect weights during transport? The plastic shell and organised recesses provide protection against shocks and contamination during routine transport and handling. Are cast weights suitable for storage in this case? No, the case is not suitable for cast weights; those typically require specific accommodation due to different shapes and higher mass. Who supplies this product and where is it shipped from? The product is supplied by KERN and can be ordered via Metav Werkzeuge; stock is distributed from Emmerich for delivery across Europe. KERN, Germany — Contact: not provided