1 mg–200 g Aluminium-Protected Weight Case For E1–M1 Standard Sets, Compact Button Format - KERN
€109.00
Product information "1 mg–200 g Aluminium-Protected Weight Case For E1–M1 Standard Sets, Compact Button Format - KERN"
Take advantage of the combination of robust protection, suitability for high-precision classes and compact design to keep calibration sets organised and secure; order the aluminium-protected case directly via Metav Werkzeuge or consult our specialists for tailored advice.
KERN 313-040-600 Aluminium-protected case for standard weight sets — 1 mg–200 g, E1–M1
KERN 313-040-600 is an aluminium-protected case designed to store and transport calibration weight sets for precision metrology, compatible with button and compact weight formats.
- Aluminium-protected shell for robust transport
- Fits calibration weights 1 mg–200 g, E1–M1
- Compact layout for button and compact weights
- Lightweight at 0.5 kg for easy handling
Preserve measurement integrity with sturdy protection
The aluminium construction offers a durable outer shell that reduces mechanical stress during transport and storage, helping to preserve the calibration condition of sensitive masses. By housing weights in a dedicated protective case, the risk of knocks, surface contamination and handling damage is minimised, which supports consistent measurement results across routine checks. This practical protection contributes to fewer recalibrations and lower lifecycle costs for precision equipment.
Broad compatibility simplifies workshop inventory
Designed for nominal values from 1 mg–200 g and suitable for calibration classes E1–M1, the case accommodates a wide range of precision requirements — from highest-accuracy reference weights to standard laboratory masses. The internal layout is intended for button/compact weight forms, enabling efficient organisation of sets and faster selection during calibration tasks. Clear class coverage reduces uncertainty when matching weights to balances and standard procedures.
Ready for the demands of professional metrology environments
At just 0.5 kg, the case is notably lightweight while remaining robust, facilitating handheld transport between workstations or to off-site checks. As a KERN accessory, the case complements established calibration workflows and supports traceable handling of weight sets. The organised storage reduces handling time and contributes to a calmer workflow, offering both practical efficiency and the reassurance that precision components are kept in a suitable environment.
Contact Metav Werkzeuge in Emmerich for expert guidance on the KERN 313-040-600 aluminium-protected case — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific calibration sets
Technical Data
- Article number: 313-040-600
- Manufacturer: KERN
- GTIN: 4045761222779
- SKU: 313-040-600
Facts
- Weight: 0.5 kg
- Suitable nominal values: 1 mg–200 g
- Calibration classes: E1–M1
- Customs tariff number: 84239090
Special features
- Aluminium construction
- Designed for button / compact weight forms
- Aluminium-protected case for weight sets
- Origin: CN
FAQ
Which nominal values can be stored in the case?
The aluminium-protected case stores calibration weights with nominal values from 1 mg to 200 g.
Which calibration classes is the case suitable for?
The case is specified for calibration classes E1 to M1, covering high-precision reference masses through standard classes.
Is the case intended for a particular weight shape or format?
Yes, the internal organisation is designed for button and compact weight formats.
Who manufactures the aluminium-protected case?
The case is produced by KERN and marketed under the SKU 313-040-600.
Is the case convenient for transport between sites?
With a total weight of 0.5 kg and a robust aluminium shell, the case is lightweight and suited for routine transport of calibration weights.
Manufacturer: KERN — Origin: CN. Manufacturer address and contact not supplied.
Zubehör
Take advantage of a lightweight, polyamide handling tool that ensures a secure grip on small calibration weights up to 200 g; its 100 mm length combines fine control with easy handling for routine calibration tasks. Order directly via Metav Werkzeuge or consult our specialists for matching accessories and delivery from Emmerich. KERN 315-242 Tweezer (Polyamide, 100 mm) KERN 315-242 is a precision plastic tweezer for secure handling of small calibration weights in laboratories and workshops Secure grip for small calibration weights Suitable for weights E1–M3, 1 mg–200 g 100 mm length for precise handling Polyamide construction, lightweight 10 g Precision handling reduces contamination and measurement error The compact design provides a controlled hold when placing and removing calibration masses, helping to preserve the integrity of sensitive components. Made from polyamide, the instrument is gentle on metallic and plated surfaces and reduces risk of scratching or marking. The compatibility with 1 mg–200 g weights across E1–M3 classes means the tool supports a wide range of calibration workflows, supplying consistent handling where repeatability matters. Built for routine use, the tweezer contributes to faster setup times and fewer handling-related deviations. Comfortable length and light weight for repetitive tasks At 100 mm, the geometry balances reach and tactile feedback to enable precise positioning without overextension of the hand. The construction results in a lightweight tool — approximately 10 g — that decreases operator fatigue during repeated handling. The slim tips facilitate access to small masses and narrow pans, while the overall form factor supports careful handling during calibration runs. Clear, repeatable manipulation of weights improves throughput and aids adherence to internal quality procedures. Durable, easy-care design for laboratory and workshop environments The choice of high-quality plastic provides a durable and easy to clean solution suitable for environments where metal tweezers could risk scratching or produce magnetic influence. Maintenance is straightforward: wipe clean and store in a dry place to maintain tip alignment and performance. The tool's simple construction minimises service requirements and offers a dependable adjunct to balances, scales and precision measuring equipment in both calibration laboratories and industrial workshops. Contact Metav Werkzeuge today for tailored advice and supply of the KERN 315-242 tweezer; our Emmerich-based team can confirm suitability for specific calibration setups and arrange prompt delivery via the central European warehouse (info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271) Technical data Article number: 315 SKU: 315-242 Manufacturer: KERN GTIN: 4045761003439 Material: Polyamide (plastic) Facts Length: 100 mm Weight: 0.01 kg Suitable weight range: 1 mg–200 g Special features Secure grip for small calibration weights Suitable for weight classes E1–M3 Lightweight construction for reduced operator fatigue Simple cleaning and low maintenance FAQ What weight range is compatible with these tweezers? The KERN 315-242 tweezer is suitable for handling calibration weights from 1 mg up to 200 g. Which weight classes can be handled safely with this tool? This tweezer supports weights across classes E1 to M3, making it appropriate for a broad range of calibration tasks. Is the material safe for delicate or plated masses? Yes, the polyamide construction of the KERN 315-242 is designed to be gentle on delicate and plated surfaces, helping to avoid scratches. How should the tweezer be maintained to ensure longevity? Routine care for the KERN 315-242 involves simple cleaning with a soft cloth and storage in a dry place to preserve tip alignment and performance. Can this tool be used in both laboratory and workshop environments? The lightweight, easy-care design of the KERN 315-242 makes it suitable for calibration benches in laboratories as well as workshop settings where precise handling is required. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271
Take advantage of a simple, reliable accessory that keeps calibration masses free from dust while preserving accuracy and prolonging service life. The combination of gentle bristles, low weight and practical handling ensures efficient routine maintenance of scales and weights. Order the KERN brush directly via Metav Werkzeuge or consult our advisors for further details. KERN 318-270 Dust Brush — compact brush for gentle cleaning of calibration weights The KERN 318-270 dust brush is a lightweight accessory designed to remove dust and particles from calibration weights and weighing surfaces in laboratories and workshops. Soft bristles for gentle cleaning Designed for calibration weights Lightweight and easy to handle Preserve measurement accuracy with gentle, targeted cleaning Regular cleaning of calibration masses prevents contamination that can alter mass values and affect the repeatability of results. The compact brush offers gentle bristles that remove dust without abrading surfaces or leaving residues, helping to maintain the precision of weights used in verification and calibration. For technicians and workshop teams, this reduces the frequency of recalibration and supports consistent measurement quality across production and quality-assurance processes. Practical handling for routine maintenance and quick interventions The accessory is intentionally lightweight and easy to manoeuvre during daily maintenance tasks, enabling swift removal of particles from weight stacks and pans without disassembly. Ergonomic handling minimises the risk of accidental knocks or slips near sensitive balances, while the brush design supports access to small grooves and recessed areas. This results in faster cleaning cycles and less downtime, contributing to a more efficient workflow in busy metrology environments. Reliability in supply and fit for professional environments The brush is supplied by a recognised manufacturer for weighing technology and suits workshops, service departments and calibration laboratories that require straightforward maintenance tools. Paired with Metav Werkzeuge’s role as a dependable distributor, this accessory supports a transparent supply chain and practical on-bench readiness. Investing in simple, purpose-built maintenance tools safeguards the performance of weighing equipment and complements broader quality-management measures. Contact Metav Werkzeuge to procure the KERN 318-270 dust brush for dependable maintenance of calibration weights or to request additional technical information Technical data Article number: 318 SKU: 318-270 Manufacturer: KERN GTIN: 4045761004146 Facts Weight: 0.01 kg Eclass: 21041109 Special features Suitable for cleaning calibration weights Rapid dispatch available via distributor FAQ How does this brush protect calibration accuracy? The brush removes dust and particles that can adhere to masses; using the KERN 318-270 dust brush helps maintain the declared mass values and stable measurement results. Is the brush suitable for all types of laboratory weights? The brush is intended for routine cleaning of calibration weights and standard weighing pans; compatibility with specialised mass geometries should be assessed case by case. Can the brush be used on balance pans without causing damage? Yes, the soft bristles are designed for gentle cleaning and avoid abrasive contact that could harm pans or plated surfaces. Manufacturer: KERN — Address: not specified — Contact: not specified