1 mg–200 g Calibration Weight Set, Knob Style, Polished Stainless Steel, Plastic Case, OIML E2 - KERN
€1,220.00
Product information "1 mg–200 g Calibration Weight Set, Knob Style, Polished Stainless Steel, Plastic Case, OIML E2 - KERN"
Take advantage of the combination of OIML Class E2 accuracy, a 1 mg–200 g measuring range and polished stainless steel construction for dependable calibration results; order the set directly via Metav Werkzeuge or consult their specialists for specification support.
KERN 313-044 — OIML Class E2 test weight set, 1 mg–200 g, polished stainless steel
A KERN 313-044 test weight set designed for high-precision calibration of laboratory and industrial balances, supplied in a protected plastic case
- OIML Class E2 accuracy
- Knob-shaped weights for easy handling
- Polished stainless steel construction
- Milligram weights in separate plastic etui
Consistent accuracy for repeatable calibration results
The set is certified as OIML Class E2, making it suitable for high-precision calibration tasks where small deviations matter. With a measuring range of 1 mg–200 g, the kit covers a broad spectrum of calibration points, enabling a single set to support both analytical and precision balances. The metrological classification indicates tightly controlled tolerances and predictable behaviour during routine checks, which helps stabilise process quality and reduces uncertainty in measurement chains. Using weights in knob form simplifies positioning on small pans while the polished stainless steel finish minimises surface contamination and eases cleaning, supporting reliable, repeatable results.
Easy handling and organised storage to speed up workflows
Ergonomic knob weights and a dedicated storage solution reduce handling errors and save time during calibration cycles. The milligram weights (1 mg–500 mg) are supplied inside a separate plastic etui, allowing fine weights to be protected and handled independently from the larger pieces; larger denominations sit securely in the main plastic case. This arrangement preserves accuracy by lowering the risk of contamination and mechanical damage, and it streamlines inventory checks during internal audits. Conservative design choices support efficient daily routines without introducing complex procedures.
Practical compatibility and procurement clarity for calibration labs
The set integrates smoothly into established calibration procedures and procurement systems. The technical configuration—including the narrow tolerance class and the 1 mg–200 g span—matches requirements for analytical laboratories and quality control departments that demand traceable reference masses. The clear SKU and product identifiers make ordering and stock-keeping straightforward, while the robust construction supports repeated use in workshop and lab environments. For procurement and specification questions, consult the product code and the manufacturer details when planning replacements or additions to calibration equipment.
Contact Metav Werkzeuge in Emmerich for tailored advice, procurement assistance or to discuss whether this KERN 313-044 test weight set fits specific calibration requirements
Technical data
- Article number: 313-044
- Manufacturer: KERN
- GTIN: 4045761081017
- Origin: DE
- SKU: 313-044
- OIML class: E2
Facts
- Weight range: 1 mg–200 g
- Total package weight: 0.94 kg
- Tariff number: 84239090
- eCl@ss: 32120103
Special features
- Material: polished stainless steel
- Case material: plastic
- Form: knob shape
- Milligram weights (1 mg–500 mg) in separate plastic etui
- Supplied as a complete test weight set
FAQ
What accuracy class does this test weight set meet?
The KERN 313-044 test weight set meets OIML Class E2, suitable for high-precision calibration tasks on analytical and precision balances.
Which weight range is included in the set?
The set covers a 1 mg–200 g range; the milligram denominations (1 mg–500 mg) are stored in a separate plastic etui for secure handling.
What material are the weights made from?
Weights are manufactured from polished stainless steel, offering good surface stability and ease of cleaning for calibration routines.
Is the set suitable for laboratory and workshop use?
Yes. The OIML Class E2 tolerance and the organised case design make the set appropriate for calibration in both laboratory and industrial quality-control environments.
KERN · Origin: Germany · GTIN: 4045761081017
Zubehör
Take advantage of durable, lightweight storage and organised inserts to keep calibration weights safe and accessible; the compact design supports routine handling and workshop transport. Order the plastic case directly via Metav Werkzeuge or ask our consultants if needed. Plastic case KERN 313-052-400 – Carrying case for standard calibration weight sets, up to 500 g The Plastic case KERN 313-052-400 is a compact carrying solution for standard calibration weight sets, providing organised storage and protection for weights used in precision metrology. Plastic case for standard weight sets up to 500 g Designed for weight classes E1 to M3 Compact, lightweight design for workshop transport Compatible with button/compact weight formats Secure storage that preserves calibration accuracy The robust plastic construction provides a protective outer shell that shields calibration weights from dust, knocks and moisture during storage and transit. Inside, the layout is tailored for standard subdivision sets so that each mass is held securely; this reduces the risk of surface damage and contamination that can affect measurement results. Conserving the surface integrity of calibration masses supports repeatable weighing and helps maintain traceability between calibration intervals. Organised layout for efficient handling and traceability A clearly arranged internal layout enables quick identification and removal of individual masses, which speeds up routine checks and decreases handling time. The case is specified for weight classes E1–M3 and nominal values up to 500 g, matching common calibration procedures in laboratories and workshops. By keeping sets together in a dedicated container, record-keeping and procedural compliance are simplified, which supports quality systems and audit readiness. Workshop-ready: portable, lightweight and practical With a low own weight of 0.35 kg, the case is easy to carry between bench, calibration station and storage shelf. The compact format reduces occupied space on the workbench and is convenient for mobile service technicians who require a reliable transport solution. The material resists routine workshop wear and can be wiped clean, so maintenance is straightforward and no specialist care is required to keep the case operational. Clear scope of use and compatibility guidance The design caters specifically to button/compact mass formats and standard weight sets; it is not suitable for cast weights or atypical mass geometries. This distinction matters because cast masses often require bespoke recesses or heavier-duty containment. If there is uncertainty about compatibility with a particular set, the case’s intended scope—standard subdivision, E1 to M3, up to 500 g—should be checked before purchase to ensure correct fit and continued measurement reliability. For tailored advice or to secure supply from our Emmerich warehouse, contact Metav Werkzeuge for further information and ordering assistance regarding the KERN 313-052-400 plastic case Technical data SKU: 313-052-400 GTIN: 4045761077935 Manufacturer: KERN Country of origin: Germany Facts Weight: 0.35 kg Suitable nominal values: 1 mg–500 g Weight classes: E1–M3 Special features Material: Plastic For standard weight sets (button/compact format) Not suitable for cast weights FAQ Is the case suitable for calibration weights above 500 g? The case is specified for nominal values up to 500 g; weights above this range are not covered by the internal layout and may not be held securely. Can the case be used for different weight classes? Yes, the container is designed for weight classes E1 to M3, supporting the common precision classes used in calibration laboratories. Does the case protect weights during transport? The plastic shell and organised recesses provide protection against shocks and contamination during routine transport and handling. Are cast weights suitable for storage in this case? No, the case is not suitable for cast weights; those typically require specific accommodation due to different shapes and higher mass. Who supplies this product and where is it shipped from? The product is supplied by KERN and can be ordered via Metav Werkzeuge; stock is distributed from Emmerich for delivery across Europe. KERN, Germany — Contact: not provided