1 mg–500 g Aluminium-Protected Weight Case For E1–M1 Standard Sets, Compact Button Style - KERN
€132.00
Product information "1 mg–500 g Aluminium-Protected Weight Case For E1–M1 Standard Sets, Compact Button Style - KERN"
Take advantage of the combination of robust aluminium protection, precise compatibility with calibration classes and a lightweight, compact design to keep standard weight sets organised and safe. Order the case directly via Metav Werkzeuge or ask our consultants for tailored advice.
Aluminium-protected Case KERN 313-050-600 — protective case for standard weight sets, 1 mg–500 g
The Aluminium-protected Case is a lightweight, rigid transport and storage solution designed for standard calibration weight sets in laboratory and workshop environments.
- Aluminium-protected construction
- Suitable for 1 mg–500 g weight sets
- Compatible with classes E1–M1
- Knob/compact format for efficient storage
Built for reliable calibration workflows and secure transport
The case’s aluminium-protected outer shell delivers mechanical resilience without excessive mass, providing secure transport for sensitive calibration masses. Designed for 1 mg–500 g weight sets and compatible with E1–M1 accuracy classes, the etui secures individual pieces in a knob/compact layout that minimises movement during handling. This reduces the risk of damage and the need for recalibration, supporting continuous, predictable operation in metrology chains.
Organised layout that speeds up daily routines
A compact internal arrangement keeps weights separated and accessible, enabling faster selection and return to storage during quality control cycles. The knob/compact configuration simplifies identification and handling of small masses while preserving their surfaces and tolerances. For workshops and laboratories that prioritise efficiency, the structured interior contributes to a smoother workflow and fewer interruptions for searches or cleaning.
Robust protection without compromising portability
With a total mass of approximately 0.7 kg, the case balances robust protection with easy handling. The aluminium construction shields contents from external mechanical impacts and environmental strain during transport. The rigid shell also serves as a practical protective barrier in shared storage areas, reducing the likelihood of accidental knocks affecting highly accurate weight sets.
Suitable for standardised metrology environments
Intended for standard weight sets in the knob/compact form and for use with E1–M1 classes, the case supports conformity and traceability requirements common in calibration labs and regulated production environments. The design focuses on preserving the geometric and surface integrity of masses used for calibration, contributing to reliable measurement chains and fewer unplanned calibrations.
Contact Metav Werkzeuge in Emmerich for detailed advice on integrating the KERN 313-050-600 aluminium-protected case into calibration routines or to request further technical specifications: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271
Technical Data
- Article number: 313
- SKU: 313-050-600
- Manufacturer: KERN
- Material: aluminium
- Weight: 0.7 kg
- Suitable for: 1 mg–500 g
- Classes: E1–M1
- GTIN: 4045761222786
- Country of origin: CN
- Tariff code: 84239090
Facts
- Range: 1 mg–500 g
- Mass (case): 0.7 kg
- Accuracy classes supported: E1–M1
- GTIN numeric identifier: 4045761222786
Special features
- Aluminium-protected outer shell
- Knob/compact internal layout for weight sets
- Designed for standard weight sets
- Compact, portable format
- Suitable for laboratory and workshop use
FAQ
What weight range does the case accommodate?
The case is designed for weight sets from 1 mg–500 g, suitable for compact or knob-style masses.
Which calibration classes are compatible with this case?
The KERN aluminium-protected case supports E1–M1 classes, making it suitable for high-precision laboratory and calibration environments.
What material is the case made from?
The outer shell is aluminium, chosen for its combination of rigidity and low weight.
How heavy is the empty case?
The case weighs approximately 0.7 kg, offering protection while remaining portable.
Is the case suitable for workshop transport?
Yes; the robust aluminium construction and compact layout protect masses during routine transport within workshops and between lab benches.
Manufacturer: KERN; Distributor: Metav Werkzeuge, Emmerich am Rhein; Contact: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271
Zubehör
Take advantage of a lightweight, polyamide handling tool that ensures a secure grip on small calibration weights up to 200 g; its 100 mm length combines fine control with easy handling for routine calibration tasks. Order directly via Metav Werkzeuge or consult our specialists for matching accessories and delivery from Emmerich. KERN 315-242 Tweezer (Polyamide, 100 mm) KERN 315-242 is a precision plastic tweezer for secure handling of small calibration weights in laboratories and workshops Secure grip for small calibration weights Suitable for weights E1–M3, 1 mg–200 g 100 mm length for precise handling Polyamide construction, lightweight 10 g Precision handling reduces contamination and measurement error The compact design provides a controlled hold when placing and removing calibration masses, helping to preserve the integrity of sensitive components. Made from polyamide, the instrument is gentle on metallic and plated surfaces and reduces risk of scratching or marking. The compatibility with 1 mg–200 g weights across E1–M3 classes means the tool supports a wide range of calibration workflows, supplying consistent handling where repeatability matters. Built for routine use, the tweezer contributes to faster setup times and fewer handling-related deviations. Comfortable length and light weight for repetitive tasks At 100 mm, the geometry balances reach and tactile feedback to enable precise positioning without overextension of the hand. The construction results in a lightweight tool — approximately 10 g — that decreases operator fatigue during repeated handling. The slim tips facilitate access to small masses and narrow pans, while the overall form factor supports careful handling during calibration runs. Clear, repeatable manipulation of weights improves throughput and aids adherence to internal quality procedures. Durable, easy-care design for laboratory and workshop environments The choice of high-quality plastic provides a durable and easy to clean solution suitable for environments where metal tweezers could risk scratching or produce magnetic influence. Maintenance is straightforward: wipe clean and store in a dry place to maintain tip alignment and performance. The tool's simple construction minimises service requirements and offers a dependable adjunct to balances, scales and precision measuring equipment in both calibration laboratories and industrial workshops. Contact Metav Werkzeuge today for tailored advice and supply of the KERN 315-242 tweezer; our Emmerich-based team can confirm suitability for specific calibration setups and arrange prompt delivery via the central European warehouse (info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271) Technical data Article number: 315 SKU: 315-242 Manufacturer: KERN GTIN: 4045761003439 Material: Polyamide (plastic) Facts Length: 100 mm Weight: 0.01 kg Suitable weight range: 1 mg–200 g Special features Secure grip for small calibration weights Suitable for weight classes E1–M3 Lightweight construction for reduced operator fatigue Simple cleaning and low maintenance FAQ What weight range is compatible with these tweezers? The KERN 315-242 tweezer is suitable for handling calibration weights from 1 mg up to 200 g. Which weight classes can be handled safely with this tool? This tweezer supports weights across classes E1 to M3, making it appropriate for a broad range of calibration tasks. Is the material safe for delicate or plated masses? Yes, the polyamide construction of the KERN 315-242 is designed to be gentle on delicate and plated surfaces, helping to avoid scratches. How should the tweezer be maintained to ensure longevity? Routine care for the KERN 315-242 involves simple cleaning with a soft cloth and storage in a dry place to preserve tip alignment and performance. Can this tool be used in both laboratory and workshop environments? The lightweight, easy-care design of the KERN 315-242 makes it suitable for calibration benches in laboratories as well as workshop settings where precise handling is required. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271
Take advantage of a simple, reliable accessory that keeps calibration masses free from dust while preserving accuracy and prolonging service life. The combination of gentle bristles, low weight and practical handling ensures efficient routine maintenance of scales and weights. Order the KERN brush directly via Metav Werkzeuge or consult our advisors for further details. KERN 318-270 Dust Brush — compact brush for gentle cleaning of calibration weights The KERN 318-270 dust brush is a lightweight accessory designed to remove dust and particles from calibration weights and weighing surfaces in laboratories and workshops. Soft bristles for gentle cleaning Designed for calibration weights Lightweight and easy to handle Preserve measurement accuracy with gentle, targeted cleaning Regular cleaning of calibration masses prevents contamination that can alter mass values and affect the repeatability of results. The compact brush offers gentle bristles that remove dust without abrading surfaces or leaving residues, helping to maintain the precision of weights used in verification and calibration. For technicians and workshop teams, this reduces the frequency of recalibration and supports consistent measurement quality across production and quality-assurance processes. Practical handling for routine maintenance and quick interventions The accessory is intentionally lightweight and easy to manoeuvre during daily maintenance tasks, enabling swift removal of particles from weight stacks and pans without disassembly. Ergonomic handling minimises the risk of accidental knocks or slips near sensitive balances, while the brush design supports access to small grooves and recessed areas. This results in faster cleaning cycles and less downtime, contributing to a more efficient workflow in busy metrology environments. Reliability in supply and fit for professional environments The brush is supplied by a recognised manufacturer for weighing technology and suits workshops, service departments and calibration laboratories that require straightforward maintenance tools. Paired with Metav Werkzeuge’s role as a dependable distributor, this accessory supports a transparent supply chain and practical on-bench readiness. Investing in simple, purpose-built maintenance tools safeguards the performance of weighing equipment and complements broader quality-management measures. Contact Metav Werkzeuge to procure the KERN 318-270 dust brush for dependable maintenance of calibration weights or to request additional technical information Technical data Article number: 318 SKU: 318-270 Manufacturer: KERN GTIN: 4045761004146 Facts Weight: 0.01 kg Eclass: 21041109 Special features Suitable for cleaning calibration weights Rapid dispatch available via distributor FAQ How does this brush protect calibration accuracy? The brush removes dust and particles that can adhere to masses; using the KERN 318-270 dust brush helps maintain the declared mass values and stable measurement results. Is the brush suitable for all types of laboratory weights? The brush is intended for routine cleaning of calibration weights and standard weighing pans; compatibility with specialised mass geometries should be assessed case by case. Can the brush be used on balance pans without causing damage? Yes, the soft bristles are designed for gentle cleaning and avoid abrasive contact that could harm pans or plated surfaces. Manufacturer: KERN — Address: not specified — Contact: not specified