1 mg–1 kg Weight Set Three-Point Knob Form Polished Stainless Steel In Aluminium Case, OIML E2 - KERN
€1,700.00
Product information "1 mg–1 kg Weight Set Three-Point Knob Form Polished Stainless Steel In Aluminium Case, OIML E2 - KERN"
Take advantage of high accuracy, a broad 1 mg–1 kg range and durable handling for consistent calibration results; order directly via Metav Werkzeuge or consult our specialists for application support.
Weight set 313-066 (KERN) — OIML Class E2, 1 mg–1 kg, polished stainless steel in aluminium case
The Weight set 313-066 is a precision OIML Class E2 weight set designed for calibration and verification of balances in laboratories and industrial workshops.
- OIML Class E2 accuracy
- Range 1 mg–1 kg in button form
- Polished stainless steel construction
- Aluminium case with separate mg tray
High-precision calibration for traceable results
The set is manufactured to OIML Class E2 tolerances, offering a stable reference for routine checks and recalibrations of analytical and precision balances. With a nominal range of 1 mg–1 kg, the set supports verification across typical laboratory and bench-top scales, enabling reliable comparison to statutory or internal limits. The declared accuracy class means reduced uncertainty in measurement chains, which streamlines documentation for quality management and audits while lowering the need for frequent external calibration.
Purpose-built design for safe handling and storage
Components are executed in polished stainless steel in a button form that eases handling and minimises contamination from fingerprints. Milligram weights are supplied in a separate mg tray made of plastic to protect the smallest masses from damage and to simplify selection during procedures. The complete set is supplied in an aluminium case, offering robust protection during transport and storage; this reduces the risk of accidental knocks and keeps the set organised for rapid deployment in calibration routines.
Practical benefits and suitable applications
This calibration set is suited to laboratory use, in-house verification routines and quality control stations where repeatable, documented measurements are required. The combination of a wide mass range and compact storage supports efficient workflows: fewer sets are required to cover various scales, and traceable checks can be completed faster. In addition, the stainless-steel construction ensures long service life with minimal maintenance, helping to reduce total cost of ownership in precision metrology environments.
For tailored advice on the KERN weight set 313-066 and reliable delivery from our Emmerich depot, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930; our consultants will assist with specifications and availability
Technical data
- Article number: 313-066
- Manufacturer: KERN
- GTIN: 4045761223547
- SKU: 313-066
- OIML class: E2
- Range: 1 mg–1 kg
- Material: polished stainless steel
- Case: aluminium
Core specifications
- Total gross weight: 2.7 kg
- Form: button form
- Origin: DE
- Tariff number: 84239090
Features and materials
- Milligram tray: separate plastic tray for 1 mg–500 mg weights
- Finish: polished surface for reduced corrosion and handling marks
- Intended use: calibration and verification of precision balances
FAQ
What accuracy class does this weight set meet?
The Weight set 313-066 meets OIML Class E2 requirements; it is manufactured by KERN to provide the low tolerances expected for laboratory and verification use.
What does OIML Class E2 mean in practice?
OIML Class E2 indicates tight permissible errors for each nominal mass; the Weight set 313-066 is therefore suitable where low measurement uncertainty and traceable calibration records are required.
How are the smallest masses supplied and protected?
Milligram weights in the Weight set 313-066 are stored in a separate plastic tray inside the aluminium case, which protects the 1 mg–500 mg pieces from damage and contamination.
Is this set suitable for routine balance checks and internal calibration?
Yes, the KERN Weight set 313-066 is designed for routine checks and in-house calibration of analytical and precision balances across the 1 mg–1 kg range.
What materials are used for the weights and the case?
The weights are made of polished stainless steel and are supplied in an aluminium case; the Weight set 313-066 combines corrosion-resistant masses with a durable transport and storage solution.
Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271
Zubehör
Take advantage of the combination of aluminium protection, compatibility with weight classes E1–M1 and the compact design for reliable storage and safe transport of calibration weights. Order the case directly via Metav Werkzeuge or consult our advisors for tailored guidance. KERN 313-060-600 Aluminium-protected case for standard weight sets (E1–M1, 1 mg–1 kg) The Aluminium-protected case 313-060-600 offers secure, transport-ready storage for standard calibration weight sets used in laboratories, calibration rooms and workshops. Aluminium-protected housing Compatible with weight classes E1–M1 Holds standard sets from 1 mg to 1 kg Button/compact format for organised storage Robust protection for precision weights The aluminium-protected outer shell provides a lightweight yet impact-resistant barrier, preserving the integrity of delicate calibration artefacts during transport and daily handling. Designed for standard mass sets, the case accommodates 1 mg–1 kg nominal values and supports the stringent tolerances required for classes E1–M1, reducing the risk of deformation or contamination that can affect measurement traceability. The solid construction combines low weight with high rigidity, making it a practical solution for laboratory technicians and service engineers who require dependable protection on the move. Organised interior that preserves accuracy A precisely cut foam insert and compact layout keep each weight in a defined position, preventing contact between items and ensuring quick identification and access. The internal arrangement suits the button/compact form factor of standard sets, enabling efficient inventory checks and fast preparation for calibration routines. By securing individual masses, the case minimises handling-related errors and accelerates daily workflows, which supports higher throughput without compromising measurement quality. Compliance support and operational continuity Compatibility with E1–M1 classes means the case is suitable for a wide range of precision applications, from national metrology labs to in-house quality assurance. The protective design assists in maintaining calibration status and simplifies storage in controlled environments. Manufactured by KERN, the solution aligns with professional requirements for traceability and repeatable performance, helping to safeguard assets that form the basis of accurate weighing results across production and inspection processes. Durable, compact and workshop-ready At approximately 0.8 kg, the housing remains easy to handle while offering durable protection suited to everyday industrial use. The aluminium material resists wear and supports long service life, reducing the need for frequent replacements and contributing to steady operational availability. For organisations aiming to consolidate suppliers and streamline equipment logistics, this case represents a practical component that complements a complete calibration toolkit. Contact Metav Werkzeuge in Emmerich for expert advice on integrating the KERN 313-060-600 aluminium-protected case into existing calibration procedures — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 313-060-600 Manufacturer: KERN GTIN: 4045761222793 Material: Aluminium Origin: CN Core numerical data Weight (case): 0.8 kg Nominal weights accommodated: 1 mg–1 kg Weight classes: E1–M1 Commodity code: 84239090 eClass: 21100103 Special features Aluminium-protected case for calibration weight sets Designed for button/compact format weights Suitable for classes E1–M1 and nominal range 1 mg–1 kg Compact, impact-resistant housing for transport and storage FAQ What weight range fits in the case? The aluminium-protected case is designed for nominal values from 1 mg to 1 kg and accommodates standard compact/button-format sets. Is the case suitable for E1 calibration weights? Yes, the case supports weights in classes E1–M1, making it appropriate for highest-precision sets requiring strict handling. How does the interior protect individual weights? A tailored foam insert secures each piece in its own recess, preventing contact and minimising handling-related deviations. Can the case be used for field transport to customer sites? The robust aluminium housing and compact design are intended to protect weights during transport between laboratories and on-site calibration visits. Who manufactures this case? KERN produces the aluminium-protected case 313-060-600 to support professional metrology and calibration workflows. KERN; Country of origin: CN; GTIN: 4045761222793