1 mg-2 kg Aluminium-Protected Weight Case For Standard Weight Sets, E1–M1 - KERN
€189.00
Product information "1 mg-2 kg Aluminium-Protected Weight Case For Standard Weight Sets, E1–M1 - KERN"
Lean on robust aluminium protection, compatibility with E1–M1 calibration classes and a compact layout for reliable storage and transport of calibration weights. Order the aluminium-protected case directly via Metav Werkzeuge or ask our consultants if needed.
Aluminium-protected Case 313-070-600 — KERN; for 1 mg–2 kg, E1–M1
The Aluminium-protected Case 313-070-600 is designed to protect and organise standard calibration weight sets from 1 mg to 2 kg, delivering secure storage and easy handling in laboratory and workshop environments.
- Aluminium protection for secure storage
- Compatible with E1–M1 calibration classes
- Accommodates 1 mg–2 kg weight range
- Designed for button/compact weight sets
Protection tailored to metrology needs
The case is constructed from aluminium, providing a corrosion-resistant and impact-resistant shell that reduces the risk of contamination and mechanical damage during transport or storage. For precision weights, surface integrity and a dust-free environment are essential; the sturdy housing preserves the calibration condition of weights used in high-accuracy applications. By combining a rigid outer shell with an interior layout that minimises movement, the system supports long-term measurement reliability and reduces the need for frequent recalibration.
Organised layout to speed up calibration workflows
A clear internal arrangement for button/compact weights streamlines the preparation and execution of calibration procedures. The defined compartments allow quick identification and retrieval of the required nominal values, saving time in routine checks and audit preparations. Reduced handling lowers the chance of fingerprints or particles affecting mass standards, which in turn supports consistent results and accelerates workflow in both metrology laboratories and service departments.
Built for longevity and practical handling
Lightweight yet robust construction balances portability with protection: the case is easy to carry between workstations while still guarding sensitive standards from shocks. The durable shell minimises wear under regular use and the compact footprint requires little bench space. This combination of robust construction and practical ergonomics helps maintain operational uptime and lowers the total cost of ownership through fewer damaged items and less downtime.
Practical compatibility with recognised calibration classes
Designed specifically for calibration sets covering 1 mg–2 kg, the case accommodates weights across internationally recognised categories, including E1–M1 classes. These classes indicate the tolerance and intended application range of the weights; E1 denotes the highest precision for laboratory reference standards, while M1 suits routine and industrial checks. The 313-070-600 therefore supports both laboratory-grade storage and workshop-level transport requirements without compromise.
Contact Metav Werkzeuge in Emmerich for tailored advice on KERN cases and suitable weight handling—email info@metav-werkzeuge.com or phone +49 2822 7131930
Technical data
- Article number: 313-070-600
- Manufacturer: KERN
- Material: Aluminium
- Origin country: CN
Facts
- Weight: 1.25 kg
- Nominal range: 1 mg–2 kg
- Calibration classes: E1–M1
- Eclass: 21100103
- HS code: 84239090
Special features
- Aluminium-protected case for weight sets
- Suitable for button/compact weights
- Product group: Aluminium-protected cases
- SKU: 313-070-600
FAQ
Which nominal weights fit in this case?
The case is suitable for calibration weights ranging from 1 mg to 2 kg, covering common laboratory and workshop sets.
Is the case compatible with high-precision weights?
Yes, the design supports E1 class weights as well as M1, making it appropriate for high-precision laboratory standards and routine industrial weights.
What material is the case made of and why is that important?
The case is made from aluminium, chosen for its corrosion resistance and impact protection, which helps preserve the condition of calibration masses.
Can the case be used for transport between sites?
The robust aluminium shell and secure internal organisation make the case suitable for safe transport of weight sets between workstations or to off-site calibrations.
KERN — Address: not specified; Contact: info@metav-werkzeuge.com | +49 2822 7131930
Zubehör
Take advantage of a lightweight, polyamide handling tool that ensures a secure grip on small calibration weights up to 200 g; its 100 mm length combines fine control with easy handling for routine calibration tasks. Order directly via Metav Werkzeuge or consult our specialists for matching accessories and delivery from Emmerich. KERN 315-242 Tweezer (Polyamide, 100 mm) KERN 315-242 is a precision plastic tweezer for secure handling of small calibration weights in laboratories and workshops Secure grip for small calibration weights Suitable for weights E1–M3, 1 mg–200 g 100 mm length for precise handling Polyamide construction, lightweight 10 g Precision handling reduces contamination and measurement error The compact design provides a controlled hold when placing and removing calibration masses, helping to preserve the integrity of sensitive components. Made from polyamide, the instrument is gentle on metallic and plated surfaces and reduces risk of scratching or marking. The compatibility with 1 mg–200 g weights across E1–M3 classes means the tool supports a wide range of calibration workflows, supplying consistent handling where repeatability matters. Built for routine use, the tweezer contributes to faster setup times and fewer handling-related deviations. Comfortable length and light weight for repetitive tasks At 100 mm, the geometry balances reach and tactile feedback to enable precise positioning without overextension of the hand. The construction results in a lightweight tool — approximately 10 g — that decreases operator fatigue during repeated handling. The slim tips facilitate access to small masses and narrow pans, while the overall form factor supports careful handling during calibration runs. Clear, repeatable manipulation of weights improves throughput and aids adherence to internal quality procedures. Durable, easy-care design for laboratory and workshop environments The choice of high-quality plastic provides a durable and easy to clean solution suitable for environments where metal tweezers could risk scratching or produce magnetic influence. Maintenance is straightforward: wipe clean and store in a dry place to maintain tip alignment and performance. The tool's simple construction minimises service requirements and offers a dependable adjunct to balances, scales and precision measuring equipment in both calibration laboratories and industrial workshops. Contact Metav Werkzeuge today for tailored advice and supply of the KERN 315-242 tweezer; our Emmerich-based team can confirm suitability for specific calibration setups and arrange prompt delivery via the central European warehouse (info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271) Technical data Article number: 315 SKU: 315-242 Manufacturer: KERN GTIN: 4045761003439 Material: Polyamide (plastic) Facts Length: 100 mm Weight: 0.01 kg Suitable weight range: 1 mg–200 g Special features Secure grip for small calibration weights Suitable for weight classes E1–M3 Lightweight construction for reduced operator fatigue Simple cleaning and low maintenance FAQ What weight range is compatible with these tweezers? The KERN 315-242 tweezer is suitable for handling calibration weights from 1 mg up to 200 g. Which weight classes can be handled safely with this tool? This tweezer supports weights across classes E1 to M3, making it appropriate for a broad range of calibration tasks. Is the material safe for delicate or plated masses? Yes, the polyamide construction of the KERN 315-242 is designed to be gentle on delicate and plated surfaces, helping to avoid scratches. How should the tweezer be maintained to ensure longevity? Routine care for the KERN 315-242 involves simple cleaning with a soft cloth and storage in a dry place to preserve tip alignment and performance. Can this tool be used in both laboratory and workshop environments? The lightweight, easy-care design of the KERN 315-242 makes it suitable for calibration benches in laboratories as well as workshop settings where precise handling is required. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271
Take advantage of a simple, reliable accessory that keeps calibration masses free from dust while preserving accuracy and prolonging service life. The combination of gentle bristles, low weight and practical handling ensures efficient routine maintenance of scales and weights. Order the KERN brush directly via Metav Werkzeuge or consult our advisors for further details. KERN 318-270 Dust Brush — compact brush for gentle cleaning of calibration weights The KERN 318-270 dust brush is a lightweight accessory designed to remove dust and particles from calibration weights and weighing surfaces in laboratories and workshops. Soft bristles for gentle cleaning Designed for calibration weights Lightweight and easy to handle Preserve measurement accuracy with gentle, targeted cleaning Regular cleaning of calibration masses prevents contamination that can alter mass values and affect the repeatability of results. The compact brush offers gentle bristles that remove dust without abrading surfaces or leaving residues, helping to maintain the precision of weights used in verification and calibration. For technicians and workshop teams, this reduces the frequency of recalibration and supports consistent measurement quality across production and quality-assurance processes. Practical handling for routine maintenance and quick interventions The accessory is intentionally lightweight and easy to manoeuvre during daily maintenance tasks, enabling swift removal of particles from weight stacks and pans without disassembly. Ergonomic handling minimises the risk of accidental knocks or slips near sensitive balances, while the brush design supports access to small grooves and recessed areas. This results in faster cleaning cycles and less downtime, contributing to a more efficient workflow in busy metrology environments. Reliability in supply and fit for professional environments The brush is supplied by a recognised manufacturer for weighing technology and suits workshops, service departments and calibration laboratories that require straightforward maintenance tools. Paired with Metav Werkzeuge’s role as a dependable distributor, this accessory supports a transparent supply chain and practical on-bench readiness. Investing in simple, purpose-built maintenance tools safeguards the performance of weighing equipment and complements broader quality-management measures. Contact Metav Werkzeuge to procure the KERN 318-270 dust brush for dependable maintenance of calibration weights or to request additional technical information Technical data Article number: 318 SKU: 318-270 Manufacturer: KERN GTIN: 4045761004146 Facts Weight: 0.01 kg Eclass: 21041109 Special features Suitable for cleaning calibration weights Rapid dispatch available via distributor FAQ How does this brush protect calibration accuracy? The brush removes dust and particles that can adhere to masses; using the KERN 318-270 dust brush helps maintain the declared mass values and stable measurement results. Is the brush suitable for all types of laboratory weights? The brush is intended for routine cleaning of calibration weights and standard weighing pans; compatibility with specialised mass geometries should be assessed case by case. Can the brush be used on balance pans without causing damage? Yes, the soft bristles are designed for gentle cleaning and avoid abrasive contact that could harm pans or plated surfaces. Manufacturer: KERN — Address: not specified — Contact: not specified