1 g–10 kg E2 Test Weight Set Button Shape, Polished Stainless Steel, Aluminium Case - KERN
€3,630.00
Product information "1 g–10 kg E2 Test Weight Set Button Shape, Polished Stainless Steel, Aluminium Case - KERN"
Take advantage of the combination of OIML class E2 accuracy, a comprehensive 1 g–10 kg range and robust storage in an aluminium case for consistent, reproducible calibrations; order the set directly via Metav Werkzeuge or consult our specialists for tailored advice.
KERN 314-096 — Weight set (OIML class E2, 1 g–10 kg)
The KERN 314-096 is a precision weight set for calibration and verification of laboratory and industrial scales, supplied as button-form weights in a secure aluminium case.
- OIML class E2 accuracy
- Range 1 g–10 kg
- Polished stainless steel weights
- Aluminium case for secure storage
High-accuracy calibration that supports compliance and repeatability
The set is certified to OIML class E2, which designates weights suitable for high-precision calibration work where tight tolerances and low measurement uncertainty are required. Using standards of this class helps laboratories and service providers produce reproducible calibration results and document conformity with internal and external quality requirements. The polished stainless steel construction contributes to long-term dimensional and mass stability by resisting corrosion and surface contamination, ensuring the masses remain reliable between checks.
Ergonomic design and secure storage to protect measurement integrity
Each mass in the set is supplied in a button form, allowing precise handling with tweezers or gloves and reducing the risk of contamination from skin contact. The aluminium carrying case organises the set and provides shock-resistant protection during transport and storage, which in turn preserves calibration status and traceability. Together, the handling design and protective case reduce handling errors and simplify routine procedures for calibration technicians and metrology staff.
Broad application scope for laboratories and industrial workshops
Covering nominal values from 1 g–10 kg, the set spans the sizes most frequently required for calibration and verification tasks, lowering the need for multiple separate kits. Originating from Germany and produced by a recognised manufacturer, the set supports both bench-top laboratory work and industrial scale calibration routines. For facilities seeking to centralise suppliers and ensure consistent quality across workbenches, this weight set delivers measurable efficiency and traceability benefits while fitting into existing calibration workflows. If further technical data are required, Metav’s consultants can provide assistance and clarification.
For reliable, standards-compliant calibrations with the KERN 314-096, contact Metav Werkzeuge in Emmerich for expert guidance and secure supply.
Technical data
- Article number: 314-096
- Manufacturer: KERN
- GTIN: 4045761223158
- OIML class: E2
- Material: Polished stainless steel
- Form: Button form
- Case material: Aluminium
- Origin: Germany
- Commodity code: 84239090
Facts
- Nominal value range: 1 g–10 kg
- Total set mass: 23.9 kg
- Eclass: 32120103
- SKU: 314-096
Special features
- OIML class E2 certification
- Button-shaped weights for precise handling
- Polished stainless steel surface
- Aluminium etui for organised storage and transport
- Suitable for laboratory and industrial calibration
FAQ
What tolerance and accuracy class does this weight set have?
The KERN 314-096 is certified to OIML class E2, providing high-precision tolerances suitable for laboratory calibration and traceable verification tasks.
Which nominal values are included in the set?
The set covers nominal values from 1 g–10 kg, making it appropriate for a wide range of calibration applications across workshops and labs.
What material are the weights made from and why does it matter?
Weights are made of polished stainless steel, chosen for corrosion resistance and surface stability, which helps maintain mass accuracy over time.
Is a protective case included with the weight set?
Yes, the KERN 314-096 is supplied in an aluminium case (etui) that secures the masses for safe storage and transport.
Who is this weight set intended for?
The set is designed for calibration laboratories, calibration service providers and industrial users who require traceable, high-precision reference masses for routine calibration and verification.
KERN · Germany · Metav Werkzeuge: info@metav-werkzeuge.com · +49 2822 7131930
Zubehör
Take advantage of the combination of robust protection, precise compatibility with calibration classes and a compact transport-friendly design to keep instruments safe and inspection-ready; order the aluminium-protected case directly via Metav Werkzeuge or ask our consultants for specification advice. Aluminium-protected case for standard calibration weight sets by KERN — protects 1 mg–10 kg, suitable for classes E1–M1 The Aluminium-protected case is a purpose-built storage and transport solution for calibration weight sets, designed to keep standard knob/compact weights secure and organised in laboratories and workshops Aluminium-protected interior for weight sets Compatible with weight classes E1–M1 Holds nominal values 1 mg–10 kg Robust transport protection, compact design Preserve calibration integrity through secure, lightweight protection A well-designed storage solution reduces handling risk and drift. The case’s aluminium outer shell provides a firm barrier against mechanical shocks while remaining lightweight for routine use. When calibration masses are kept in appropriate containment, the precision of measurements is maintained and interval recalibrations are less frequently required. The combination of durable construction and organised interior helps protect sensitive surfaces of calibration weights and supports consistent measurement results across production or quality-control workflows. Minimise transport damage and speed up workflows Frequent transportation of weight sets between workstations or facilities increases the chance of dents, contamination or surface wear. This aluminium-protected case offers robust protection with a compact footprint that simplifies storage and handling. By keeping weights in a single, clearly labelled case compatible with common knob/compact formats, inventory checks and set changes are faster and more reliable. The practical result is reduced downtime during instrument exchange and a tangible efficiency gain in day-to-day metrology tasks. Built for compatibility with industry classes and wide nominal ranges The case is specified for nominal values from 1 mg–10 kg and supports weight classifications E1 through M1, making it suitable for high-accuracy laboratory standards as well as routine verification sets. This broad compatibility means fewer specialised containers are required, simplifying logistics and shelf space. The manufacturer KERN has engineered the internal layout to accommodate standard knob/compact weights securely, aiding rapid identification and safe handling during calibration cycles. Trusted partner benefits for workshop and industry procurement Sourcing the right accessories from a reliable supplier reduces the risk of unsuitable purchases. Metav Werkzeuge combines extensive metrology experience with broad availability, delivering solutions that meet workshop and industrial needs. Choosing a protective case that matches international weight classes and nominal ranges supports consistent quality across measurement tasks, helping teams focus on production and inspection rather than corrective maintenance or avoidable recalibrations. Choose the KERN aluminium-protected case to secure calibration weight sets and contact Metav Werkzeuge in Emmerich for tailored procurement advice by email or phone Technical data Article number: 313-090-600 SKU: 313-090-600 GTIN: 4045761136021 Manufacturer: KERN Facts Nominal range: 1 mg–10 kg Suitable classes: E1–M1 Net weight: 5 kg Customs tariff: 84239090 Special features Material: Aluminium For knob/compact weight sets Product category: Calibration weight case Origin: CN FAQ What nominal weight range is accommodated by this case? The aluminium-protected case accommodates nominal values from 1 mg to 10 kg and is sized for standard knob/compact calibration weights. Is the case suitable for high-precision weight classes? Yes, the case is compatible with calibration classes E1 through M1, making it suitable for high-precision laboratory standards as well as routine verification sets. Who manufactures this protective case and what is the SKU? The case is manufactured by KERN and sold under SKU 313-090-600 (GTIN 4045761136021). Can the case reduce the frequency of recalibration by protecting weights? Proper storage in the aluminium-protected case minimises surface damage and contamination, which supports stable mass values and can help reduce avoidable recalibration events. Is this case suitable for transporting weights between sites? The case is designed for transport with a robust aluminium shell and a compact layout that secures knob/compact weights during handling and transit. KERN — Manufacturer; Origin: CN; GTIN: 4045761136021