1 mg-50 g Test Weight Set Three-Point Knob Polished Stainless Steel In Aluminium Case - KERN
€465.00
Product information "1 mg-50 g Test Weight Set Three-Point Knob Polished Stainless Steel In Aluminium Case - KERN"
Take advantage of precise OIML F1 accuracy, a wide 1 mg–50 g nominal range and robust protective storage to keep calibration routines efficient and reproducible. Order the set directly via Metav Werkzeuge or consult our specialists for application-specific advice.
KERN 323-026 weight set (OIML F1, 1 mg–50 g)
A KERN 323-026 weight set designed for the verification and calibration of precision balances in laboratories and workshops
- OIML class F1 certified accuracy
- Range 1 mg–50 g with separate mg insert
- Polished stainless-steel button shape
- Aluminium case with protective insert
Ensure consistent measurement during routine calibrations
The OIML F1 classification guarantees tight manufacturing tolerances, making this set suitable for routine verification and internal calibration of precision balances. With a nominal range of 1 mg–50 g, the set supports both milligram-level adjustments and checks across more substantial gram values. The button-shaped weights reduce handling contact and minimise the risk of contamination, while clearly defined nominal steps aid reproducibility and reduce adjustment time.
Robust construction for workshop and laboratory environments
Manufactured from polished stainless steel, the weights resist corrosion and surface wear that can alter mass values over time; this prolongs service intervals and reduces the need for frequent replacements. The complete package is supplied in an aluminium case with a separate plastic insert for milligram weights, ensuring secure storage and protection from abrasion during transport. These physical safeguards translate into fewer recalibrations required and a lower total cost of ownership for calibration workflows.
Traceability, compliance and practical handling that build confidence
Using a certified set simplifies internal quality procedures and supports traceability when documenting calibration routines. The compact design and ergonomic button form facilitate safe handling with tweezers or weight forceps, reducing handling errors that can affect results. For laboratories and trade shops seeking dependable measurement routines, the combination of certified accuracy and practical protection supports both technical compliance and operational efficiency without adding complexity.
Contact Metav Werkzeuge in Emmerich for tailored advice by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to secure the KERN 323-026 weight set and ensure precise, traceable calibrations
Technical data
-
Article number: 323
-
SKU: 323-026
-
Manufacturer: KERN
-
GTIN: 4045761223820
-
OIML class: F1
-
Nominal values: 1 mg–50 g
-
Material: polished stainless steel
-
Case: aluminium
-
Form: button shape
-
Origin: DE
-
Tariff number: 84239090
-
Total weight: 0.63 kg
Core specifications
-
Nominal range: 1 mg–50 g
-
Total mass of set: 0.63 kg
-
GTIN numeric: 4045761223820
-
Tariff/HS code: 84239090
-
OIML accuracy class: F1
Special features
-
Button-shaped weights for secure handling
-
Polished stainless-steel construction
-
Separate plastic insert for milligram weights (1 mg–500 mg)
-
Supplied in aluminium case
-
Intended for verification and calibration of precision balances
FAQ
What does OIML class F1 mean for calibration?
OIML class F1 indicates narrow manufacturing tolerances suitable for laboratory-grade calibration and routine verification; the KERN 323-026 weight set meets these tolerances for reliable internal checks.
Can this set be used on analytical and precision balances?
Yes, the 1 mg–50 g range covers typical analytical and precision balance verification tasks, allowing the set to be used for adjustments and routine performance checks.
How are the milligram weights stored within the case?
The milligram weights (1 mg–500 mg) are located in a separate plastic insert inside the aluminium case to protect the smallest pieces from contact and abrasion.
What handling and maintenance are recommended to preserve accuracy?
Handle weights using forceps or gloves, store them in the supplied aluminium case when not in use, and avoid touching the measurement surfaces; periodic comparison against a higher-accuracy reference or calibration service will maintain traceability.
Is this set suitable for trade or legal verification?
The KERN 323-026 is an OIML F1 set designed for calibration and verification routines; use for legal verification depends on national regulations and the specific statutory requirements in force
KERN, Germany
Zubehör
Take advantage of durable aluminium protection, compatibility with 1 mg–50 g nominal values and suitability for E1–M1 classes to secure calibration weights during storage and transport. Order the Aluminium-protected Case 313-020-600 directly via Metav Werkzeuge or consult our specialists for further specification support. Aluminium-protected Case 313-020-600 — Case for standard weight sets, 1 mg–50 g | KERN The Aluminium-protected Case 313-020-600 is a robust storage and transport solution for standard calibration weight sets, designed to safeguard precision masses in laboratory, service and calibration environments Aluminium-protected case for weight sets For nominal values 1 mg–50 g Compatible with accuracy classes E1–M1 Secure storage that preserves calibration integrity The rigid aluminium housing provides a lightweight yet protective shell that reduces the risk of mechanical damage and contamination to sensitive masses. Intended for weight sets in the nominal range 1 mg–50 g, the case supports button and compact formats, ensuring that high-accuracy pieces remain stable and organised. Robust casing minimises external influences that can compromise traceability and repeatability, contributing to consistent measurement results in routine calibration work. Practical handling for service and transport efficiency Weighing 0.45 kg, the case is easy to handle while still offering resilient protection during transfer between locations. The internal layout is designed for standard button/compact masses, simplifying inventory management and speeding up assembly of sets for verification tasks. By reducing handling time and the likelihood of damage in transit, the enclosure supports efficient workflows in calibration laboratories and on-site metrology services, helping to maintain equipment uptime and measurement reliability. Procurement advantages and brand assurance Compatibility with classes E1–M1 and the wide nominal range make this case a flexible choice for central stores and procurement teams seeking standardised solutions. Manufactured by KERN, the item meets expectations for professional metrology accessories and integrates with established calibration routines. Selecting a dedicated protective case helps safeguard investment in high-accuracy masses and reduces the need for frequent replacements, supporting a cost-effective maintenance strategy over time. Contact Metav Werkzeuge for availability and specification advice on the KERN Aluminium-protected Case 313-020-600 and ensure the selected case matches your calibration requirements Technical Data Article number: 313 SKU: 313-020-600 Manufacturer: KERN Material: Aluminium Nominal values: 1 mg – 50 g Facts Weight: 0.45 kg Accuracy classes: E1–M1 GTIN: 4045761222755 Special features Aluminium-protected housing For button/compact weight designs Suitable for standard calibration weight sets FAQ Is this case suitable for E1 class masses? The KERN Aluminium-protected Case 313-020-600 is specified for accuracy classes E1–M1 and is suitable for storing and transporting high-precision masses in those classes. What nominal weight range fits the case? The enclosure accommodates nominal values from 1 mg to 50 g, covering typical laboratory and service weight sets in button and compact formats. What material is the case made from and how heavy is it? The case is constructed from aluminium and has a net weight of 0.45 kg, offering a balance of strength and portability. Can compact or button weights be organised within the case? Yes, the case is intended for button/compact weight designs and supports standard arrangements used in calibration sets. KERN · Origin: CN · GTIN: 4045761222755