1 g-50 g Calibration Weight Set Three-Point Knob Polished Stainless Steel in Aluminium Case - KERN
€330.00
Product information "1 g-50 g Calibration Weight Set Three-Point Knob Polished Stainless Steel in Aluminium Case - KERN"
Take advantage of a high-accuracy calibration set that combines OIML F1 conformity, robust stainless steel construction and convenient storage in an aluminium case for reliable balance verification and repeatable measurement results. Order the set directly via Metav Werkzeuge or request specialist advice from our consultants for tailored application support.
KERN 324-026 — Weight set (OIML F1, 1 g–50 g, polished stainless steel)
A KERN 324-026 weight set designed for precise calibration and routine verification of laboratory and workshop balances, supplied in a protective aluminium case and configured in a knob form for straightforward handling
- OIML Class F1 certified accuracy
- Nominal range 1 g–50 g, knob form
- Polished stainless steel construction
- Supplied in aluminium case
Consistent accuracy for routine calibration and compliance
The set is manufactured to OIML F1 tolerances, offering reproducible mass values across the nominal range 1 g–50 g and supporting traceable calibration processes. Class F1 certification indicates defined permissible errors suitable for laboratory checks and internal verification cycles; this reduces uncertainty in routine measurements and helps maintain instrument performance between formal calibrations. Using certified mass standards streamlines conformity checks and supports quality-management documentation.
Robust materials and ergonomic handling for everyday use
Constructed from polished stainless steel, the weights resist corrosion and contamination, simplifying maintenance and minimising drift in mass values. The knob form provides secure, tactile handling with reduced risk of finger oil transfer to the mass surfaces, while the compact aluminium case protects the set during storage and transport. The total set mass is approximately 0.55 kg, enabling easy portability between workstations and safe storage on a calibration bench.
Designed to integrate with laboratory and workshop workflows
These precision masses are suitable for use in calibration intervals, instrument verification and acceptance testing where traceable reference weights are required. The hard-wearing finish and standardised form factor allow straightforward cleaning and re-certification cycles. By employing certified weights, laboratories and service departments can demonstrate consistent verification routines and reduce process-related measurement risk while keeping downtime low.
Clear benefits and practical considerations for procurement
Choosing certified mass standards brings measurable benefits: improved repeatability of readings, simplified documentation for audits and a durable set that requires little upkeep. The compact aluminium case keeps components organised and minimises handling time during calibration sequences. For applications requiring documented traceability or regular verification, these attributes translate directly into operational efficiency and reduced measurement uncertainty.
Contact Metav Werkzeuge today for expert advice on application suitability and to arrange supply of the KERN 324-026 weight set — email info@metav-werkzeuge.com or call +49 2822 7131930
Technical data
- Article number: 324-026
- Manufacturer: KERN
- GTIN: 4045761223905
- OIML class: F1
- SKU: 324-026
Specifications
- Nominal value: 1 g–50 g
- Total set weight: 0.55 kg
- Commodity code: 84239090
- eCl@ss: 32120103
Materials & features
- Material: polished stainless steel
- Form: knob form
- Case material: aluminium
- Origin: DE
- Product category: precision weights (mass set)
FAQ
What level of accuracy does this weight set provide?
The KERN 324-026 weight set conforms to OIML F1 tolerances, providing accuracy suitable for routine verification and internal calibration of precision balances across the 1 g–50 g range.
How should the weights be handled and cleaned?
Handle the masses by their knobs to reduce surface contamination; the polished stainless steel finish allows gentle cleaning with lint-free cloths and approved solvent wipes where required before verification.
Is the set suitable for mobile calibration services?
Yes. The compact construction and the protective aluminium case make the set practical for service technicians and mobile calibration work.
Can these weights be recertified or recalibrated?
The KERN 324-026 set is designed for periodic recalibration; users typically return masses to an accredited laboratory to restore documented traceability and permissible error statements.
Are the weights resistant to corrosion in workshop environments?
The polished stainless steel construction offers good resistance to atmospheric corrosion and workshop contaminants; appropriate cleaning and storage in the aluminium case further prolong service life.
KERN, Germany
Zubehör
Take advantage of the aluminium protection and organised storage for 1 g–50 g calibration sets, combining durability and traceable handling for class E1–M2 weights. Order the aluminium‑protected case directly via Metav Werkzeuge or consult our specialists if further specification is required. Aluminium‑protected case for standard weight sets – KERN, for 1 g–50 g (E1–M2) The aluminium‑protected case provides secure, precision‑grade storage and transport for compact and button calibration weights used in laboratories and workshops. Aluminium protection for robust handling Suitable for 1 g–50 g weight ranges Designed for weight classes E1–M2 Compact format for button/compact weights Robust protection that preserves calibration integrity The aluminium‑protected case is engineered to safeguard delicate calibration weights during storage and transport, reducing the risk of contamination and mechanical damage. Its rigid aluminium shell offers a stable external barrier while keeping the internal arrangement organised for quick access to individual values. For metrology departments and service technicians, this means fewer handling errors and a more reliable chain of custody for E1–M2 class weights, supporting consistent measurement quality and regulatory compliance. Lightweight, compact design for efficient workflow With a product weight of approximately 0.45 kg, this case is easy to handle without compromising on protective performance. The lightweight aluminium construction simplifies daily logistics and reduces strain during routine calibration rounds. The case’s compatibility with 1 g–50 g nominal values and its compact format for button-style weights make it well suited to bench work and mobile calibration sets, contributing to faster set‑up times and improved operational efficiency in production and service environments. Practical organisation for precision tasks and inventory control Designed specifically for standard weight sets, the case keeps individual masses clearly separated and identifiable, reducing sorting time and the potential for mix‑ups. This practical organisation supports traceability during calibration cycles and helps maintain the physical condition required for accurate mass standards. Paired with Metav Werkzeuge’s breadth of metrology products and expertise, this aluminium case becomes part of an integrated approach to affordable, dependable precision in workshops and laboratories. Contact Metav Werkzeuge for swift supply of the KERN 314-020-600 aluminium‑protected case or request tailored advice from our Emmerich team Technical data Article number: 314-020-600 Manufacturer: KERN SKU: 314-020-600 Material: Aluminium Net weight: 0.45 kg Origin: CN Harmonised code: 84239090 ECLASS: 21100103 Facts Nominal range: 1 g–50 g Weight classes: E1–M2 Special features Aluminium‑protected case for weight sets (button/compact) Product group: Aluminium‑protected cases and pouches for calibration weights FAQ Is this case suitable for high‑accuracy weights such as E1 class? The aluminium‑protected case from KERN is suitable for weight classes E1–M2 and supports nominal values from 1 g to 50 g (SKU 314-020-600), making it appropriate for high‑accuracy laboratory masses. Can the case be used for button or compact mass formats? Yes, the design is specified for button/compact weight forms and is intended to keep such masses organised and protected during storage and transport. What material is the case made from and how does that help in daily use? The case is constructed from aluminium, which offers a robust outer shell while remaining lightweight; this combination aids handling and reduces the risk of damage to the stored calibration weights. Is the product weight relevant for mobile calibration tasks? At approximately 0.45 kg, the case is light enough for mobile use yet still provides the protective structure needed for sensitive mass standards, supporting technicians who carry calibration sets between sites. Are the exact internal dimensions or foam insert specifications provided? Internal dimensions and insert details are not specified in the provided product data for the KERN aluminium‑protected case (314-020-600) KERN · Origin: CN · SKU: 314-020-600