1 mg-200 g Weight Set, OIML Class F1, Eco Form Polished Stainless Steel, Plastic Case - KERN
€720.00
Product information "1 mg-200 g Weight Set, OIML Class F1, Eco Form Polished Stainless Steel, Plastic Case - KERN"
Take advantage of the combination of OIML F1 accuracy, polished stainless steel construction and organised storage for dependable calibration routines; order the set directly via Metav Werkzeuge or contact our consultants for tailored advice.
KERN 325-044 — Precision weight set, OIML F1, 1 mg–200 g
The KERN 325-044 is a high-accuracy weight set for calibration and quality-control applications, covering the range 1 mg to 200 g and supplied in a secure plastic case
- OIML class F1 accuracy
- Range 1 mg to 200 g
- Polished stainless steel weights
- Supplied in secure plastic case
Consistent calibration accuracy for routine checks
The set is specified to OIML F1, which provides a reliable benchmark for the calibration of precision balances and scales. With a nominal range of 1 mg–200 g, the kit supports a broad spectrum of laboratory and workshop verification tasks. Choosing weights that meet an established international class reduces uncertainty in measurement results and simplifies conformity checks, so processes that depend on repeatable mass values can run with reduced rework and clearer quality documentation.
Durable materials and ergonomic Eco‑Form handling
Constructed from polished stainless steel, the weights resist corrosion and wear, offering long service life even in regular use. The Eco‑Form design improves handling and placement on balance pans while keeping the set compact for bench storage. Polished surfaces are easier to clean and are less likely to trap contaminants, which helps to maintain accuracy between recalibrations. This combination of material and form supports dependable day‑to‑day use in labs and production control environments.
Organised transport and practical workflow benefits
The set is supplied in a plastic case that houses a separate insert for the milligram weights, with the milligram subset arranged from 1 mg–500 mg for convenient access. The compact, organised layout protects each piece during transport and helps to preserve calibration integrity. A lightweight overall package (total weight approximately 0.53 kg) makes storage and handling straightforward while preserving traceable routine measurement procedures for quality-management systems.
For precise calibration requirements, request a personalised quotation or specification check from Metav Werkzeuge in Emmerich — contact via info@metav-werkzeuge.com or call +49 2822 7131930 for detailed advice on suitability for specific balances and processes
Technical data
- Article number: 325
- SKU: 325-044
- Manufacturer: KERN
- GTIN: 4045761224049
- Origin: DE
Facts
- Nominal range: 1 mg–200 g
- Milligram subset: 1 mg–500 mg (separate insert)
- Total weight: 0.53 kg
- OIML class: F1
- Tariff number: 84239090
Special features
- Eco‑Form
- Polished stainless steel
- Supplied in plastic case
- Milligram weights in separate plastic insert
FAQ
How precise are these weights for balance calibration?
The KERN 325-044 weight set meets OIML F1 requirements and is suitable for high‑precision calibration tasks within the specified 1 mg–200 g range.
Are the milligram weights stored separately?
Yes, the milligram weights (1 mg–500 mg) are supplied in a separate plastic insert within the case to aid careful handling and to protect the smallest weights.
What advantages does the polished stainless steel offer?
Polished stainless steel provides corrosion resistance, simple cleaning and improved longevity, all of which help to preserve the calibration state of the weights over time.
Is this set suitable for both laboratory and shop‑floor use?
The weight set is designed for laboratory calibration and routine quality control; its compact case and robust materials make it appropriate for controlled shop‑floor environments as well.
Does the design aid ergonomic handling on precision balances?
The Eco‑Form profile improves handling and positioning on balance pans, supporting repeatable placement and reducing handling errors during calibration with the KERN 325-044 set.
KERN · Origin: Germany
Zubehör
Take advantage of durable, lightweight storage and organised inserts to keep calibration weights safe and accessible; the compact design supports routine handling and workshop transport. Order the plastic case directly via Metav Werkzeuge or ask our consultants if needed. Plastic case KERN 313-052-400 – Carrying case for standard calibration weight sets, up to 500 g The Plastic case KERN 313-052-400 is a compact carrying solution for standard calibration weight sets, providing organised storage and protection for weights used in precision metrology. Plastic case for standard weight sets up to 500 g Designed for weight classes E1 to M3 Compact, lightweight design for workshop transport Compatible with button/compact weight formats Secure storage that preserves calibration accuracy The robust plastic construction provides a protective outer shell that shields calibration weights from dust, knocks and moisture during storage and transit. Inside, the layout is tailored for standard subdivision sets so that each mass is held securely; this reduces the risk of surface damage and contamination that can affect measurement results. Conserving the surface integrity of calibration masses supports repeatable weighing and helps maintain traceability between calibration intervals. Organised layout for efficient handling and traceability A clearly arranged internal layout enables quick identification and removal of individual masses, which speeds up routine checks and decreases handling time. The case is specified for weight classes E1–M3 and nominal values up to 500 g, matching common calibration procedures in laboratories and workshops. By keeping sets together in a dedicated container, record-keeping and procedural compliance are simplified, which supports quality systems and audit readiness. Workshop-ready: portable, lightweight and practical With a low own weight of 0.35 kg, the case is easy to carry between bench, calibration station and storage shelf. The compact format reduces occupied space on the workbench and is convenient for mobile service technicians who require a reliable transport solution. The material resists routine workshop wear and can be wiped clean, so maintenance is straightforward and no specialist care is required to keep the case operational. Clear scope of use and compatibility guidance The design caters specifically to button/compact mass formats and standard weight sets; it is not suitable for cast weights or atypical mass geometries. This distinction matters because cast masses often require bespoke recesses or heavier-duty containment. If there is uncertainty about compatibility with a particular set, the case’s intended scope—standard subdivision, E1 to M3, up to 500 g—should be checked before purchase to ensure correct fit and continued measurement reliability. For tailored advice or to secure supply from our Emmerich warehouse, contact Metav Werkzeuge for further information and ordering assistance regarding the KERN 313-052-400 plastic case Technical data SKU: 313-052-400 GTIN: 4045761077935 Manufacturer: KERN Country of origin: Germany Facts Weight: 0.35 kg Suitable nominal values: 1 mg–500 g Weight classes: E1–M3 Special features Material: Plastic For standard weight sets (button/compact format) Not suitable for cast weights FAQ Is the case suitable for calibration weights above 500 g? The case is specified for nominal values up to 500 g; weights above this range are not covered by the internal layout and may not be held securely. Can the case be used for different weight classes? Yes, the container is designed for weight classes E1 to M3, supporting the common precision classes used in calibration laboratories. Does the case protect weights during transport? The plastic shell and organised recesses provide protection against shocks and contamination during routine transport and handling. Are cast weights suitable for storage in this case? No, the case is not suitable for cast weights; those typically require specific accommodation due to different shapes and higher mass. Who supplies this product and where is it shipped from? The product is supplied by KERN and can be ordered via Metav Werkzeuge; stock is distributed from Emmerich for delivery across Europe. KERN, Germany — Contact: not provided