1 mg-50 g Calibration Weight Set Knob Form Stainless Steel Turned, Plastic Case - KERN
€365.00
Product information "1 mg-50 g Calibration Weight Set Knob Form Stainless Steel Turned, Plastic Case - KERN"
Take advantage of the combination of OIML Class F2 accuracy, a compact 1 mg–50 g range and robust stainless-steel construction for consistent calibration results and straightforward handling. Order the set directly via Metav Werkzeuge or ask the consultants for detailed advice.
KERN 333-024 weight set (OIML F2) — stainless steel, 1 mg–50 g
The KERN 333-024 weight set is a precision calibration set designed for verifying and adjusting laboratory and industrial balances across a broad milligram-to-gram range
- OIML Class F2 accuracy
- 1 mg–50 g measuring range
- Finely turned stainless-steel buttons
- Supplied in protective plastic case
Consistent, verifiable accuracy for routine calibration
The KERN 333-024 offers OIML Class F2 conformity across a 1 mg–50 g nominal range, providing a reliable basis for routine verification and adjustment of analytical and precision balances. The finely turned stainless steel weights ensure stable mass values with low susceptibility to corrosion and handling wear. For workshops and laboratories that prioritise measurement repeatability, this calibration set reduces the time spent on troubleshooting and supports consistent production and quality control workflows by delivering predictable measurement behaviour.
Practical design that protects precision and eases handling
Each mass is delivered in button weights form and organised for safe storage in a durable plastic case, with the milligram series housed in a separate insert for secure handling. This layout minimises contact and contamination during transfer and keeps sensitive milligram pieces isolated, which helps preserve calibration integrity over time. The compact, transportable kit format makes periodic checks straightforward and reduces the logistical effort associated with on-site or in-house calibration routines.
Versatile use across laboratory and industrial environments
Built for general calibration tasks rather than a single niche, the set suits a wide range of balance types where Class F2 masses are appropriate. The robust material choice and ergonomic shape support routine daily use in busy settings, enabling faster verification cycles and fewer interruptions to production. Combining technical reliability with a compact footprint, this kit contributes to efficient quality assurance without requiring elaborate storage arrangements or special handling equipment.
Contact Metav Werkzeuge in Emmerich for tailored advice, availability and safe delivery of the KERN 333-024 weight set
Technical data
- Article number: 333-024
- GTIN: 4045761005617
- Manufacturer: KERN
- Origin: DE
- Commodity code: 84239090
Facts
- Nominal range: 1 mg–50 g
- Mass weight (total): 0.5 kg
- OIML class: F2
- SKU: 333-024
Special features
- Material: finely turned stainless steel
- Form: button shape
- Case: plastic etui with separate milligram insert
- Product category: weight set (calibration weights)
- Segment: calibration weights
FAQ
What accuracy class does this weight set meet?
The KERN 333-024 weight set meets OIML Class F2, suitable for routine calibration and verification tasks that require this level of conformity.
Which mass range is covered by the set?
The set covers a nominal range from 1 mg to 50 g, enabling checks across both milligram and gram scales.
How are the smallest weights protected during storage?
Milligram weights are stored in a separate insert within the plastic case to reduce handling and contamination risk for the smallest masses.
Is the material suitable for long-term use in workshops?
Yes. The weights are made from finely turned stainless steel, offering good resistance to corrosion and mechanical wear under normal laboratory and workshop conditions.
Can this set be used on analytical balances?
The KERN 333-024 is designed for verification and adjustment tasks where OIML Class F2 masses are appropriate; suitability for a specific analytical balance should be confirmed against the instrument’s calibration requirements.
KERN — Germany — contact not provided
Zubehör
Take advantage of durable, lightweight storage and organised inserts to keep calibration weights safe and accessible; the compact design supports routine handling and workshop transport. Order the plastic case directly via Metav Werkzeuge or ask our consultants if needed. Plastic case KERN 313-052-400 – Carrying case for standard calibration weight sets, up to 500 g The Plastic case KERN 313-052-400 is a compact carrying solution for standard calibration weight sets, providing organised storage and protection for weights used in precision metrology. Plastic case for standard weight sets up to 500 g Designed for weight classes E1 to M3 Compact, lightweight design for workshop transport Compatible with button/compact weight formats Secure storage that preserves calibration accuracy The robust plastic construction provides a protective outer shell that shields calibration weights from dust, knocks and moisture during storage and transit. Inside, the layout is tailored for standard subdivision sets so that each mass is held securely; this reduces the risk of surface damage and contamination that can affect measurement results. Conserving the surface integrity of calibration masses supports repeatable weighing and helps maintain traceability between calibration intervals. Organised layout for efficient handling and traceability A clearly arranged internal layout enables quick identification and removal of individual masses, which speeds up routine checks and decreases handling time. The case is specified for weight classes E1–M3 and nominal values up to 500 g, matching common calibration procedures in laboratories and workshops. By keeping sets together in a dedicated container, record-keeping and procedural compliance are simplified, which supports quality systems and audit readiness. Workshop-ready: portable, lightweight and practical With a low own weight of 0.35 kg, the case is easy to carry between bench, calibration station and storage shelf. The compact format reduces occupied space on the workbench and is convenient for mobile service technicians who require a reliable transport solution. The material resists routine workshop wear and can be wiped clean, so maintenance is straightforward and no specialist care is required to keep the case operational. Clear scope of use and compatibility guidance The design caters specifically to button/compact mass formats and standard weight sets; it is not suitable for cast weights or atypical mass geometries. This distinction matters because cast masses often require bespoke recesses or heavier-duty containment. If there is uncertainty about compatibility with a particular set, the case’s intended scope—standard subdivision, E1 to M3, up to 500 g—should be checked before purchase to ensure correct fit and continued measurement reliability. For tailored advice or to secure supply from our Emmerich warehouse, contact Metav Werkzeuge for further information and ordering assistance regarding the KERN 313-052-400 plastic case Technical data SKU: 313-052-400 GTIN: 4045761077935 Manufacturer: KERN Country of origin: Germany Facts Weight: 0.35 kg Suitable nominal values: 1 mg–500 g Weight classes: E1–M3 Special features Material: Plastic For standard weight sets (button/compact format) Not suitable for cast weights FAQ Is the case suitable for calibration weights above 500 g? The case is specified for nominal values up to 500 g; weights above this range are not covered by the internal layout and may not be held securely. Can the case be used for different weight classes? Yes, the container is designed for weight classes E1 to M3, supporting the common precision classes used in calibration laboratories. Does the case protect weights during transport? The plastic shell and organised recesses provide protection against shocks and contamination during routine transport and handling. Are cast weights suitable for storage in this case? No, the case is not suitable for cast weights; those typically require specific accommodation due to different shapes and higher mass. Who supplies this product and where is it shipped from? The product is supplied by KERN and can be ordered via Metav Werkzeuge; stock is distributed from Emmerich for delivery across Europe. KERN, Germany — Contact: not provided