1 mg-50 g Precision Weight Set Three-Point Knob Stainless Steel Turned, Aluminium Case - KERN
€410.00
Product information "1 mg-50 g Precision Weight Set Three-Point Knob Stainless Steel Turned, Aluminium Case - KERN"
Take advantage of precise, OIML-classified calibration and durable construction to keep verification routines efficient and reproducible; the set combines OIML F2 accuracy with a robust aluminium case and precision-turned stainless steel weights. Order the KERN 333-026 via Metav Werkzeuge or consult our specialists for application-specific advice.
KERN 333-026 calibration weight set — OIML F2, 1 mg–50 g, stainless steel
The KERN 333-026 is a compact calibration weight set designed for verification and routine calibration of laboratory and industrial balances, supplied as a knob-style set in an aluminium case.
- OIML class F2 accuracy
- Range 1 mg–50 g
- Precision-turned stainless steel
- Aluminium case with plastic insert
Reliable accuracy for consistent measurement results
The set is specified as OIML F2, signalling suitability for high-precision calibration tasks where repeatability and conformity to international tolerance classes matter. With a total range of 1 mg–50 g, the set covers the typical span required for laboratory and production-scale balances, helping to maintain process control and measurement confidence. The classification implies that the weights adhere to established tolerances, enabling straightforward comparison and consistency during verification routines and quality checks.
Durable design that simplifies handling and traceability
Each weight is precision-turned from stainless steel, providing dimensional stability and resistance to corrosion during regular use. The knob shape assists controlled handling of small masses, reducing the risk of fingerprints and particulate contamination that can alter measurement results. These design choices contribute to lower maintenance needs and consistent performance over time, which supports efficient workflows in busy calibration or quality departments.
Secure storage and clear organisation for everyday use
The set is housed in a robust aluminium case, offering mechanical protection and straightforward transport between workstations or sites. Milligram weights (1 mg–500 mg range within the set) are supplied in a separate plastic insert to ensure safe handling and rapid identification during procedures. Logical organisation, secure containment and clear labelling reduce set-up time for verification tasks and help prevent loss or damage to the smallest masses.
For precision-driven calibration tasks, rely on the KERN 333-026 — contact Metav Werkzeuge in Emmerich for application guidance and to confirm the set matches the required tolerance class for specific balances
Technical data
- Article number: 333-026
- SKU: 333-026
- Manufacturer: KERN
- GTIN: 4045761224568
Key specifications
- Weight range: 1 mg–50 g
- Net weight: 0.55 kg
- Commodity code: 84239090
- OIML class: F2
Special features
- Material: precision-turned stainless steel
- Shape: knob form
- Case: aluminium with separate plastic insert for milligram weights
- Origin: DE
FAQ
What accuracy class does this weight set comply with?
The set complies with OIML F2; the calibration weights in the KERN 333-026 follow the tolerance regime associated with that class for reliable routine verification.
Which mass values are included in the set?
The calibration set covers masses from 1 mg to 50 g, with the smallest milligram weights supplied in a separate plastic insert for secure handling.
Is the material suitable for long-term use in a workshop environment?
Yes. The weights are precision-turned stainless steel, which offers good resistance to corrosion and wear in typical laboratory and workshop conditions.
How are the weights stored and transported?
Weights are supplied in an aluminium case that protects components during transport and storage; milligram pieces are kept in a dedicated plastic insert to avoid contact and contamination.
Can this set be used for calibrating both laboratory and industrial balances?
The 1 mg–50 g range and OIML F2 classification make the set appropriate for many laboratory and production balances where F2 tolerances meet the calibration requirements.
Manufacturer: KERN — Germany; Seller contact: Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271
Zubehör
Take advantage of durable aluminium protection, compatibility with 1 mg–50 g nominal values and suitability for E1–M1 classes to secure calibration weights during storage and transport. Order the Aluminium-protected Case 313-020-600 directly via Metav Werkzeuge or consult our specialists for further specification support. Aluminium-protected Case 313-020-600 — Case for standard weight sets, 1 mg–50 g | KERN The Aluminium-protected Case 313-020-600 is a robust storage and transport solution for standard calibration weight sets, designed to safeguard precision masses in laboratory, service and calibration environments Aluminium-protected case for weight sets For nominal values 1 mg–50 g Compatible with accuracy classes E1–M1 Secure storage that preserves calibration integrity The rigid aluminium housing provides a lightweight yet protective shell that reduces the risk of mechanical damage and contamination to sensitive masses. Intended for weight sets in the nominal range 1 mg–50 g, the case supports button and compact formats, ensuring that high-accuracy pieces remain stable and organised. Robust casing minimises external influences that can compromise traceability and repeatability, contributing to consistent measurement results in routine calibration work. Practical handling for service and transport efficiency Weighing 0.45 kg, the case is easy to handle while still offering resilient protection during transfer between locations. The internal layout is designed for standard button/compact masses, simplifying inventory management and speeding up assembly of sets for verification tasks. By reducing handling time and the likelihood of damage in transit, the enclosure supports efficient workflows in calibration laboratories and on-site metrology services, helping to maintain equipment uptime and measurement reliability. Procurement advantages and brand assurance Compatibility with classes E1–M1 and the wide nominal range make this case a flexible choice for central stores and procurement teams seeking standardised solutions. Manufactured by KERN, the item meets expectations for professional metrology accessories and integrates with established calibration routines. Selecting a dedicated protective case helps safeguard investment in high-accuracy masses and reduces the need for frequent replacements, supporting a cost-effective maintenance strategy over time. Contact Metav Werkzeuge for availability and specification advice on the KERN Aluminium-protected Case 313-020-600 and ensure the selected case matches your calibration requirements Technical Data Article number: 313 SKU: 313-020-600 Manufacturer: KERN Material: Aluminium Nominal values: 1 mg – 50 g Facts Weight: 0.45 kg Accuracy classes: E1–M1 GTIN: 4045761222755 Special features Aluminium-protected housing For button/compact weight designs Suitable for standard calibration weight sets FAQ Is this case suitable for E1 class masses? The KERN Aluminium-protected Case 313-020-600 is specified for accuracy classes E1–M1 and is suitable for storing and transporting high-precision masses in those classes. What nominal weight range fits the case? The enclosure accommodates nominal values from 1 mg to 50 g, covering typical laboratory and service weight sets in button and compact formats. What material is the case made from and how heavy is it? The case is constructed from aluminium and has a net weight of 0.45 kg, offering a balance of strength and portability. Can compact or button weights be organised within the case? Yes, the case is intended for button/compact weight designs and supports standard arrangements used in calibration sets. KERN · Origin: CN · GTIN: 4045761222755