1 mg–200 g Calibration Weight Set, Knob Form, Fine-Turned Stainless Steel, Plastic Case, OIML F2 - KERN
€480.00
Product information "1 mg–200 g Calibration Weight Set, Knob Form, Fine-Turned Stainless Steel, Plastic Case, OIML F2 - KERN"
Take advantage of OIML F2 conformity, the wide 1 mg–200 g nominal range and finely turned stainless steel weights to standardise routine calibration tasks with confidence; order the KERN set directly via Metav Werkzeuge or ask our consultants if needed.
KERN 333-044 weight set – OIML F2, 1 mg–200 g, stainless steel
The KERN 333-044 weight set is a precision calibration kit for balances and laboratory scales, designed for routine verification and adjustment across micro to small mass ranges in workshops and laboratories
- OIML class F2 accuracy
- Range 1 mg–200 g
- Fine-turned stainless steel buttons
- Supplied in plastic case
Reliable accuracy for everyday calibration needs
The set offers OIML F2 conformity, which provides a dependable balance between precision and practicality for many metrology tasks. This accuracy class is suitable for verifying analytical and precision balances where traceable measurement and reproducibility are required. The finely machined stainless steel weights reduce surface irregularities that can trap contaminants, so calibration results remain stable and repeatable. Using weights graded to an established standard reduces the time spent on recurring adjustments and helps keep production and inspection workflows consistent.
Practical design that protects the reference mass
Each weight is produced as a button-shaped element, which simplifies handling and placement on pans while limiting contact area to reduce contamination risk. The set is supplied in a robust plastic case, with milligram weights stored separately for safer organisation. The compact case keeps the weights secure during transport and storage, helping to preserve the prescribed tolerance. As a result, laboratory technicians and workshop staff benefit from fewer rechecks and a clearer audit trail when documenting routine maintenance or incoming inspections.
Clear benefits for routine quality assurance
Because the kit covers a nominal range from 1 mg to 200 g, a single set supports multiple calibration steps without requiring frequent tool changes. This versatility improves efficiency when verifying a variety of balance capacities and minimises downtime during shift changes or batch controls. The use of corrosion-resistant materials and fine turning reduces drift over time, which supports longer intervals between professional recalibrations when combined with proper handling and storage procedures.
Suitable applications and handling guidance
The set is intended for use in calibration laboratories, quality assurance departments and workshops that need reliable mass references for everyday checks. For best results, handle weights with tweezers or gloves, store them in the supplied case when not in use and avoid exposure to chemical vapours or abrasive particles. Regular documentation of verification procedures, combined with the set’s traceability, provides a sound basis for compliance with internal and external quality requirements and supports consistent measurement practices across teams.
Discuss application suitability with Metav Werkzeuge’s specialists in Emmerich am Rhein or request delivery of the KERN 333-044 calibration set via info@metav-werkzeuge.com or by phone on +49 2822 7131930
Technical data
- Article number: 333-044
- SKU: 333-044
- Manufacturer: KERN
- Material: Fine-turned stainless steel
- Shape: Button form
- Case material: Plastic
- Country of origin: Germany
- HS code: 84239090
Facts
- Nominal range: 1 mg–200 g
- Total set weight: 0.94 kg
- OIML class: F2
- GTIN: 4045761005655
Special features
- Milligram weights stored separately in inner case
- Supplied in a secure plastic case
- Button-shaped weights for easy handling
- Fine machining for reduced surface contamination
FAQ
What accuracy class does this set comply with?
The kit conforms to OIML F2, providing a balance between precision and usability suitable for routine calibration and verification tasks.
Is the set suitable for laboratory and workshop use?
Yes, the KERN 333-044 weight set is designed for both laboratory calibration and workshop quality checks, supporting a wide range of balance capacities.
How should the weights be handled to maintain tolerance?
Handle with tweezers or gloves, store in the supplied plastic case and avoid contamination to preserve the specified tolerances.
Does the set include very small milligram weights?
The set contains weights from 1 mg to 200 g, with milligram weights stored separately in an inner compartment for protection.
Can this set be used for traceability and documentation?
When combined with proper handling and documented verification procedures, the set supports traceability and routine quality assurance processes.
Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — +49 2822 7131930, WhatsApp +49 170 2837271
Zubehör
Take advantage of durable, lightweight storage and organised inserts to keep calibration weights safe and accessible; the compact design supports routine handling and workshop transport. Order the plastic case directly via Metav Werkzeuge or ask our consultants if needed. Plastic case KERN 313-052-400 – Carrying case for standard calibration weight sets, up to 500 g The Plastic case KERN 313-052-400 is a compact carrying solution for standard calibration weight sets, providing organised storage and protection for weights used in precision metrology. Plastic case for standard weight sets up to 500 g Designed for weight classes E1 to M3 Compact, lightweight design for workshop transport Compatible with button/compact weight formats Secure storage that preserves calibration accuracy The robust plastic construction provides a protective outer shell that shields calibration weights from dust, knocks and moisture during storage and transit. Inside, the layout is tailored for standard subdivision sets so that each mass is held securely; this reduces the risk of surface damage and contamination that can affect measurement results. Conserving the surface integrity of calibration masses supports repeatable weighing and helps maintain traceability between calibration intervals. Organised layout for efficient handling and traceability A clearly arranged internal layout enables quick identification and removal of individual masses, which speeds up routine checks and decreases handling time. The case is specified for weight classes E1–M3 and nominal values up to 500 g, matching common calibration procedures in laboratories and workshops. By keeping sets together in a dedicated container, record-keeping and procedural compliance are simplified, which supports quality systems and audit readiness. Workshop-ready: portable, lightweight and practical With a low own weight of 0.35 kg, the case is easy to carry between bench, calibration station and storage shelf. The compact format reduces occupied space on the workbench and is convenient for mobile service technicians who require a reliable transport solution. The material resists routine workshop wear and can be wiped clean, so maintenance is straightforward and no specialist care is required to keep the case operational. Clear scope of use and compatibility guidance The design caters specifically to button/compact mass formats and standard weight sets; it is not suitable for cast weights or atypical mass geometries. This distinction matters because cast masses often require bespoke recesses or heavier-duty containment. If there is uncertainty about compatibility with a particular set, the case’s intended scope—standard subdivision, E1 to M3, up to 500 g—should be checked before purchase to ensure correct fit and continued measurement reliability. For tailored advice or to secure supply from our Emmerich warehouse, contact Metav Werkzeuge for further information and ordering assistance regarding the KERN 313-052-400 plastic case Technical data SKU: 313-052-400 GTIN: 4045761077935 Manufacturer: KERN Country of origin: Germany Facts Weight: 0.35 kg Suitable nominal values: 1 mg–500 g Weight classes: E1–M3 Special features Material: Plastic For standard weight sets (button/compact format) Not suitable for cast weights FAQ Is the case suitable for calibration weights above 500 g? The case is specified for nominal values up to 500 g; weights above this range are not covered by the internal layout and may not be held securely. Can the case be used for different weight classes? Yes, the container is designed for weight classes E1 to M3, supporting the common precision classes used in calibration laboratories. Does the case protect weights during transport? The plastic shell and organised recesses provide protection against shocks and contamination during routine transport and handling. Are cast weights suitable for storage in this case? No, the case is not suitable for cast weights; those typically require specific accommodation due to different shapes and higher mass. Who supplies this product and where is it shipped from? The product is supplied by KERN and can be ordered via Metav Werkzeuge; stock is distributed from Emmerich for delivery across Europe. KERN, Germany — Contact: not provided