1 mg-1 kg Test Weight Set, Button Style, Fine-Turned Stainless Steel, Aluminium Case, OIML F2 - KERN
€750.00
Product information "1 mg-1 kg Test Weight Set, Button Style, Fine-Turned Stainless Steel, Aluminium Case, OIML F2 - KERN"
Take advantage of precise OIML Class F2 accuracy, finely turned stainless steel weights and a protective aluminium case to ensure consistent verification and routine checks; order the set directly via Metav Werkzeuge or consult our advisors for specific measurement requirements.
Weight set KERN 333-066 — OIML Class F2, 1 mg–1 kg, stainless steel, aluminium case
The Weight set KERN 333-066 is a calibrated OIML Class F2 set designed for scale verification and laboratory checks, covering a nominal range from 1 mg to 1 kg and supplied in a robust aluminium carrying case.
- OIML Class F2 accuracy
- 1 mg–1 kg nominal coverage
- Finely turned stainless steel weights
- Aluminium case with separate plastic insert
Consistent accuracy for routine verification
The OIML Class F2 rating provides a clear reference for acceptable measurement uncertainty in routine verification tasks, making this set suitable where F2 tolerances are required. The graded range from 1 mg–1 kg allows straightforward substitution and comparison across a wide span of balances and scales. For technicians and metrology teams, this translates into reproducible results and fewer adjustments during scheduled checks.
Robust materials that protect calibration integrity
Manufactured from finely turned stainless steel, each mass is engineered to resist surface wear and corrosion, which helps maintain long‑term stability. The complete set is presented in an aluminium case that cushions the contents and supports organised storage; the milligram weights are kept in a separate plastic case within the main container to prevent contact damage. Together, these design choices reduce handling risk and preserve the physical condition required for reliable calibration over time.
Ergonomic handling to speed up workflows
The knob shape of single masses facilitates precise placement and removal on delicate balance pans, reducing the need for tweezers or additional tools and therefore saving time during inspections. Clear labelling and a compact case layout enable rapid selection of the required mass, improving throughput in production or quality control environments. The combination of tactile design and logical organisation supports efficient operation without compromising accuracy.
Practical applications and operational benefits
Suitable for laboratories, calibration services and workshop quality control, this set supports routine checks, documentation of weight conformity and recurring verification tasks where F2 class masses are specified. The combination of a wide nominal range, corrosion‑resistant construction and protective casing offers a practical balance of durability and precision, helping maintain measurement confidence across diverse applications.
Contact Metav Werkzeuge in Emmerich for tailored advice or to arrange procurement of the KERN 333-066 weight set via info@metav-werkzeuge.com or +49 2822 7131930
Technical data
- Article number: 333-066
- Manufacturer: KERN
- GTIN: 4045761224520
- Country of origin: DE
Numbers / Core technical data
- Nominal range: 1 mg–1 kg
- Total set weight: 2.7 kg
- eClass: 32120103
- Tariff number: 84239090
Special features / Versions
- OIML class: F2
- Material: finely turned stainless steel
- Form: knob shape
- Case material: aluminium
- Milligram weights in separate plastic case
- SKU: 333-066
FAQ
What accuracy class does this set meet?
The set meets OIML Class F2 requirements; the Weight set KERN 333-066 is specified for applications needing F2 tolerances across the 1 mg–1 kg range.
Which materials are the masses made from?
Masses are made of finely turned stainless steel, chosen to resist wear and corrosion and to preserve the long‑term stability of the KERN 333-066 set.
How are the milligram weights stored within the case?
The milligram weights (1 mg–500 mg) are stored in a separate plastic case inside the aluminium etui to avoid contact damage and simplify handling.
Is this set suitable for routine verification of laboratory balances?
Yes, the nominal coverage and OIML Class F2 accuracy make the set appropriate for routine verification and comparative checks on laboratory and workshop balances.
What ergonomic features support daily use?
The masses have a knob shape for secure handling and the aluminium case offers organised storage, both of which speed up measurement tasks and reduce handling errors.
Manufacturer: KERN — Address: Germany — Contact: not specified
Zubehör
Take advantage of secure, lightweight storage that protects standard weight sets up to 5 kg, compatible with calibration classes E1–M3, and designed specifically for button and compact formats; order via Metav Werkzeuge or consult our specialists for guidance. KERN 313-082-400 Plastic Case — for standard weight sets up to 5 kg, E1–M3 A KERN 313-082-400 Plastic Case engineered to protect and organise standard weight sets (button/compact form) for calibration, laboratory and workshop use Plastic case for weight sets up to 5 kg Compatible with calibration classes E1–M3 Designed for button and compact weights Lightweight construction; easy transport Faster calibration workflows with protected storage The robust plastic case provides protected, organised storage for standard weight sets, supporting nominal values from 1 mg–5 kg and calibration classes E1–M3. By keeping weights secure and clearly arranged, routine checks and calibrations require less preparation time and handling, which increases throughput in busy calibration labs and testing environments. The case’s structured capacity reduces the risk of contamination and mechanical damage, helping maintain traceability and measurement reliability. Tailored layout for compact and button weights Designed for the specific format of button and compact weights, the internal layout is optimised to hold standard pieces securely during transport and storage. The solution is explicitly not suitable for cast weights, ensuring customers select the correct storage for precision masses rather than heavy, cast components. Clear compatibility with compact designs supports orderly handling and faster identification of required nominal values during set-up and inspections. Lightweight, durable design for easy handling With a total mass of approximately 1.5 kg, the case balances protection with portability: it is light enough for frequent movement between benches or labs yet durable enough to withstand day-to-day operational stress. The plastic construction offers resistance to moisture and common workshop contaminants, contributing to long service life and fewer replacements. Reduced handling weight also lessens manual strain and simplifies logistics for mobile calibration tasks. Compliance support and workshop efficiency Built to fit recognised weight class standards, this case assists in maintaining compliant storage for precision masses and supports efficient inventory management in industrial metrology. The German origin reinforces expectations for consistent manufacturing quality. When combined with a reliable ordering partner, this storage solution helps centralise supplies and reduces procurement complexity for calibration houses and workshops. For secure, compliant storage and practical handling of standard weight sets, contact Metav Werkzeuge to request the KERN 313-082-400 Plastic Case and consult our specialists at info@metav-werkzeuge.com or +49 2822 7131930 for tailored technical advice Technical data Article number: 313-082-400 Manufacturer: KERN GTIN: 4045761077942 Material: Plastic Origin: Germany Facts Suitable nominal values: 1 mg–5 kg Calibration classes: E1–M3 Product weight: 1.5 kg HS code: 84239090 ECLASS: 21100103 Special features For standard weight sets (button/compact design) Not suitable for cast weights Product group: Plastic cases / weight set cases Intended application: storage and transport of calibration weights FAQ What nominal weight range does the case support? The case supports standard nominal values from 1 mg to 5 kg and is intended for standard weight sets used in calibration. Is this case suitable for cast weights? No, the KERN 313-082-400 Plastic Case is explicitly not suitable for cast weights; it is intended for button and compact weight formats. Which calibration classes are compatible with this case? The case is compatible with calibration classes E1–M3, making it appropriate for high-precision and routine calibration sets. How heavy is the case itself? The case has a product weight of approximately 1.5 kg, offering a balance between protection and portability. Can the case be used in mobile calibration services? Yes, the lightweight and durable plastic construction makes the case practical for transport between sites while keeping weights organised and protected. Metav Werkzeuge, Emmerich am Rhein, Germany; info@metav-werkzeuge.com; +49 2822 7131930
Take advantage of the combination of aluminium protection, compatibility with weight classes E1–M1 and the compact design for reliable storage and safe transport of calibration weights. Order the case directly via Metav Werkzeuge or consult our advisors for tailored guidance. KERN 313-060-600 Aluminium-protected case for standard weight sets (E1–M1, 1 mg–1 kg) The Aluminium-protected case 313-060-600 offers secure, transport-ready storage for standard calibration weight sets used in laboratories, calibration rooms and workshops. Aluminium-protected housing Compatible with weight classes E1–M1 Holds standard sets from 1 mg to 1 kg Button/compact format for organised storage Robust protection for precision weights The aluminium-protected outer shell provides a lightweight yet impact-resistant barrier, preserving the integrity of delicate calibration artefacts during transport and daily handling. Designed for standard mass sets, the case accommodates 1 mg–1 kg nominal values and supports the stringent tolerances required for classes E1–M1, reducing the risk of deformation or contamination that can affect measurement traceability. The solid construction combines low weight with high rigidity, making it a practical solution for laboratory technicians and service engineers who require dependable protection on the move. Organised interior that preserves accuracy A precisely cut foam insert and compact layout keep each weight in a defined position, preventing contact between items and ensuring quick identification and access. The internal arrangement suits the button/compact form factor of standard sets, enabling efficient inventory checks and fast preparation for calibration routines. By securing individual masses, the case minimises handling-related errors and accelerates daily workflows, which supports higher throughput without compromising measurement quality. Compliance support and operational continuity Compatibility with E1–M1 classes means the case is suitable for a wide range of precision applications, from national metrology labs to in-house quality assurance. The protective design assists in maintaining calibration status and simplifies storage in controlled environments. Manufactured by KERN, the solution aligns with professional requirements for traceability and repeatable performance, helping to safeguard assets that form the basis of accurate weighing results across production and inspection processes. Durable, compact and workshop-ready At approximately 0.8 kg, the housing remains easy to handle while offering durable protection suited to everyday industrial use. The aluminium material resists wear and supports long service life, reducing the need for frequent replacements and contributing to steady operational availability. For organisations aiming to consolidate suppliers and streamline equipment logistics, this case represents a practical component that complements a complete calibration toolkit. Contact Metav Werkzeuge in Emmerich for expert advice on integrating the KERN 313-060-600 aluminium-protected case into existing calibration procedures — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 313-060-600 Manufacturer: KERN GTIN: 4045761222793 Material: Aluminium Origin: CN Core numerical data Weight (case): 0.8 kg Nominal weights accommodated: 1 mg–1 kg Weight classes: E1–M1 Commodity code: 84239090 eClass: 21100103 Special features Aluminium-protected case for calibration weight sets Designed for button/compact format weights Suitable for classes E1–M1 and nominal range 1 mg–1 kg Compact, impact-resistant housing for transport and storage FAQ What weight range fits in the case? The aluminium-protected case is designed for nominal values from 1 mg to 1 kg and accommodates standard compact/button-format sets. Is the case suitable for E1 calibration weights? Yes, the case supports weights in classes E1–M1, making it appropriate for highest-precision sets requiring strict handling. How does the interior protect individual weights? A tailored foam insert secures each piece in its own recess, preventing contact and minimising handling-related deviations. Can the case be used for field transport to customer sites? The robust aluminium housing and compact design are intended to protect weights during transport between laboratories and on-site calibration visits. Who manufactures this case? KERN produces the aluminium-protected case 313-060-600 to support professional metrology and calibration workflows. KERN; Country of origin: CN; GTIN: 4045761222793