1 g-100 g OIML Class F2 Set Of Stainless Steel Turned Disc Weights, Knob Form In Aluminium Case - KERN
€315.00
Product information "1 g-100 g OIML Class F2 Set Of Stainless Steel Turned Disc Weights, Knob Form In Aluminium Case - KERN"
Combine certified precision and robust engineering for dependable calibration results; the combination of OIML F2 classification and fine-turned stainless steel ensures measurement stability and long service life. Order the set directly via Metav Werkzeuge or contact our consultants for tailored advice.
KERN 334-036 weight set — OIML F2, nominal range 1 g–100 g, aluminium case
The KERN 334-036 weight set is a compact calibration solution for laboratory and workshop balances, offering OIML F2 accuracy in a button-shaped design and supplied in a protective aluminium case.
- OIML class F2 accuracy
- Nominal range 1 g–100 g
- Fine-turned stainless steel weights
- Supplied in aluminium case
Consistent calibration performance for precise results
The set delivers repeatable, traceable reference masses designed for routine calibration and verification of precision balances. Classified as OIML F2, the calibration tolerance meets common regulatory and quality management requirements, reducing uncertainty in weighing operations. Using a graded set from 1 g to 100 g allows stepwise checks across the balance range; this supports reproducible results and simplifies internal verification routines. The regulated tolerances of the classification aid in audit readiness and ensure that measurement data can be relied upon for production control or quality assurance.
Durable materials that reduce maintenance and handling risks
Manufactured from fine-turned stainless steel, each mass resists corrosion and surface contamination, which helps maintain nominal value over time and reduces the frequency of corrective reconditioning. The button-shaped design facilitates safe handling with tweezers or gloves, limiting fingerprints and particulate transfer that would otherwise affect accuracy. Stored in the supplied aluminium case, the set is protected from shock and dust, preserving calibration state between uses and extending service intervals for workshop and laboratory environments.
Practical set composition and workshop usability
The organised arrangement and ergonomic case design enable quick selection and controlled handling during routine checks or comparison measurements. The total set weight of approximately 0.9 kg and compact footprint makes transportation between workstations straightforward while keeping the reference masses readily available. For traceability and documentation, the clear nominal range specification supports straightforward entry into calibration records and logbooks, streamlining compliance with internal and external inspection practices.
Request expert advice or a tailored supply proposal from Metav Werkzeuge in Emmerich for the KERN 334-036 weight set and ensure calibrated accuracy for your measuring equipment
Technical data
- Article number: 334-036
- Manufacturer: KERN
- GTIN: 4045761224476
- Country of origin: Germany
Core specifications
- Nominal range: 1 g–100 g
- OIML class: F2
- Total set weight: 0.9 kg
- Commodity code: 84239090
Materials and features
- Button shape (knob)
- Fine-turned stainless steel
- Supplied in aluminium case
- Suitable as calibration/test weights
FAQ
What does OIML F2 mean for routine calibration?
OIML F2 designates a precision class suitable for routine verification and calibration of laboratory and industrial balances where moderate to high accuracy is required; the classification of the KERN 334-036 weight set defines permissible tolerances for reliable checks.
Can these masses be used on analytical balances?
The KERN 334-036 weight set provides OIML F2 accuracy; for ultra-high-resolution analytical balances a higher class may be required, so suitability should be confirmed based on balance specifications and required uncertainty.
How should the reference masses be handled to maintain accuracy?
Handle the stainless steel masses with tweezers or gloves and store them in the aluminium case when not in use to avoid contamination, fingerprints and corrosion that could alter nominal values.
Is the set suitable for mobile use between workstations?
Yes, the compact aluminium case and the set’s total weight make the kit practical for controlled transport within workshops and laboratories while keeping reference masses protected.
Does the set include calibration certificates?
Information on delivered documentation is not specified here; refer to the manufacturer’s product documentation for details about calibration certificates or verification options for the KERN 334-036.
Metav Werkzeuge, Emmerich am Rhein, Germany — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271
Zubehör
Benefit from robust aluminium protection and organised storage for calibration weights from 1 g to 100 g, compatible with accuracy classes E1–M2; order directly via Metav Werkzeuge or request advice from our consultants. Aluminium-protected Case for Calibration Weights 1 g–100 g (KERN) — Secure Storage for E1–M2 Button/Compact Sets The Aluminium-protected Case for Calibration Weights 1 g–100 g provides secure, corrosion-resistant storage and orderly transport for standard calibration weight sets in laboratories and workshop environments. Aluminium-protected housing Compatible with E1–M2 calibration classes Designed for button/compact weight sets Lightweight: 0.45 kg for easy handling Secure protection that preserves calibration accuracy A robust aluminium construction offers mechanical protection and helps shield sensitive mass standards from dust and handling contamination. Secure storage reduces the risk of nicks or surface damage that can alter a weight’s nominal value, supporting longer intervals between recalibrations. The durable shell and organised interior contribute directly to repeatable measurement results, lowering downtime for inspection routines and ensuring reliable traceability in quality-controlled processes. Designed for precision classes and a wide weight range Compatibility with accuracy classes E1–M2 makes the case suitable for both laboratory-grade and workshop-grade sets. The internal layout accommodates nominal values from 1 g to 100 g, organised for quick identification and minimal handling. For teams managing multiple calibration sets, this clarity speeds up workflows and reduces handling errors, while the case’s format for button/compact weights maintains the integrity of each individual mass standard during storage and transport. Practical handling and workshop integration Weighing just 0.45 kg, the case is easy to move between bench, lab and secure storage without adding bulk. The compact design supports tidy organisation on workbenches and in calibration cabinets, helping maintain a systematic, compliant metrology environment. Supplied by KERN and distributed through Metav Werkzeuge, the product forms part of an integrated approach to making high-precision measurement tools accessible and reliable for industry and trade. Contact Metav Werkzeuge in Emmerich for supply and tailored advice on KERN aluminium-protected cases — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 314-030-600 Article number: 314 Manufacturer: KERN Material: Aluminium Origin: CN HS code: 84239090 Facts Weight: 0.45 kg Suitable nominal values: 1 g–100 g Accuracy classes: E1–M2 Special features Aluminium-protected case for calibration weights Designed for button / compact weight sets Compact, lightweight design for easy handling FAQ What weight range is compatible with this case? The case is designed to accommodate calibration weights with nominal values from 1 g to 100 g, suitable for common laboratory and workshop sets. Which accuracy classes are supported by the case? This product supports accuracy classes E1–M2, making it appropriate for both high-precision laboratory standards and general workshop reference weights. Is the case suitable for button or compact style weights? Yes, the interior layout is specifically designed for button/compact weight sets, ensuring stable placement and protection of each mass standard. Who supplies this aluminium-protected case and where can it be sourced? The case is manufactured by KERN and is supplied via Metav Werkzeuge (SKU 314-030-600); Metav handles distribution and can advise on suitability for specific calibration requirements. KERN — Manufacturer (CN). Distributor: Metav Werkzeuge, Emmerich, Germany — info@metav-werkzeuge.com, +49 2822 7131930