1 g–1 kg Calibration Weight Set Button Stainless Steel Turned, OIML F2, Plastic Case - KERN
€600.00
Product information "1 g–1 kg Calibration Weight Set Button Stainless Steel Turned, OIML F2, Plastic Case - KERN"
A reliable calibration solution combining OIML F2 conformity, a wide 1 g–1 kg nominal range and a robust stainless steel finish for consistent routine checks; order the weight set directly via Metav Werkzeuge or ask our consultants if needed.
Calibration weight set KERN 334-064 — OIML F2, 1 g–1 kg, stainless steel, button form
A KERN 334-064 calibration weight set designed for routine verification and calibration of balances and scales across workshops and laboratories.
- OIML class F2 accuracy
- Nominal range 1 g–1 kg
- Fine‑turned stainless steel weights
- Plastic case for secure storage
Reliable conformity for routine calibration
The set meets OIML F2 tolerance requirements, providing a dependable basis for routine verification and in-house calibration of precision balances. OIML classes define allowable deviations for reference masses; compliance with F2 means the kit supports consistent measurement reproducibility for many laboratory and industrial applications. The nominal range 1 g–1 kg covers common calibration points, reducing the need for multiple specialised sets and streamlining routine control procedures.
Durable construction for long service life
Each mass in the set is made of stainless steel that has been fine‑turned to ensure stable geometry and minimal surface variation. That machining method improves long‑term mass stability by reducing surface irregularities that accelerate wear or corrosion. The overall durability translates into fewer replacements, lower maintenance effort and sustained measurement confidence during regular control cycles.
Practical handling and secure storage
The button form of the individual weights makes handling and placement straightforward during calibration tasks, especially when using tweezers or lifting devices for small masses. A fitted plastic case with dedicated compartments protects each mass from knocks and contamination while keeping the set organised for quick selection. This compact storage solution supports clean handling and preserves calibration status between uses.
Fit for purpose across workshops and labs
Designed as a general calibration kit, the set suits verification procedures on bench balances and industrial scales where traceability and repeatability are essential. By offering a complete span from 1 g to 1 kg, the set reduces process complexity and supports efficient testing regimes. The construction and conformity together deliver practical benefits: reproducible results and operational peace of mind during daily metrology tasks.
For procurement or technical consultation on the KERN 334-064 calibration weight set, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options
Technical Data
- SKU: 334-064
- Manufacturer: KERN
- GTIN: 4045761005969
- Tariff code: 84239090
- Origin: Germany
Facts
- Nominal range: 1 g–1 kg
- Total set weight: 3.7 kg
- eClass: 32120103
Special features
- OIML class F2
- Fine‑turned stainless steel
- Button form (knob)
- Plastic case (Kunststoff‑etui)
- Intended for verification of balances and scales
FAQ
What tolerance class does the set conform to?
The set conforms to OIML F2, which specifies the permissible deviations for reference masses used in routine calibration and verification tasks.
Which nominal weights are covered by the set?
The kit covers the nominal range 1 g–1 kg, providing common calibration points for laboratory and workshop balances.
What material are the masses made from?
The masses are fine‑turned stainless steel, a material choice that supports corrosion resistance and long‑term dimensional stability.
Is the set suitable for use outside a laboratory environment?
Yes. The robust stainless steel construction and protective plastic case make the set suitable for use in both workshop and laboratory settings where regular verification is required.
How does the button form help during calibration?
The button form allows easy handling and precise placement of small masses, facilitating safe use with tweezers or lifting tools and aiding reproducible positioning on balance pans.
KERN · Germany · GTIN 4045761005969
Zubehör
Take advantage of secure, lightweight storage that protects standard weight sets up to 5 kg, compatible with calibration classes E1–M3, and designed specifically for button and compact formats; order via Metav Werkzeuge or consult our specialists for guidance. KERN 313-082-400 Plastic Case — for standard weight sets up to 5 kg, E1–M3 A KERN 313-082-400 Plastic Case engineered to protect and organise standard weight sets (button/compact form) for calibration, laboratory and workshop use Plastic case for weight sets up to 5 kg Compatible with calibration classes E1–M3 Designed for button and compact weights Lightweight construction; easy transport Faster calibration workflows with protected storage The robust plastic case provides protected, organised storage for standard weight sets, supporting nominal values from 1 mg–5 kg and calibration classes E1–M3. By keeping weights secure and clearly arranged, routine checks and calibrations require less preparation time and handling, which increases throughput in busy calibration labs and testing environments. The case’s structured capacity reduces the risk of contamination and mechanical damage, helping maintain traceability and measurement reliability. Tailored layout for compact and button weights Designed for the specific format of button and compact weights, the internal layout is optimised to hold standard pieces securely during transport and storage. The solution is explicitly not suitable for cast weights, ensuring customers select the correct storage for precision masses rather than heavy, cast components. Clear compatibility with compact designs supports orderly handling and faster identification of required nominal values during set-up and inspections. Lightweight, durable design for easy handling With a total mass of approximately 1.5 kg, the case balances protection with portability: it is light enough for frequent movement between benches or labs yet durable enough to withstand day-to-day operational stress. The plastic construction offers resistance to moisture and common workshop contaminants, contributing to long service life and fewer replacements. Reduced handling weight also lessens manual strain and simplifies logistics for mobile calibration tasks. Compliance support and workshop efficiency Built to fit recognised weight class standards, this case assists in maintaining compliant storage for precision masses and supports efficient inventory management in industrial metrology. The German origin reinforces expectations for consistent manufacturing quality. When combined with a reliable ordering partner, this storage solution helps centralise supplies and reduces procurement complexity for calibration houses and workshops. For secure, compliant storage and practical handling of standard weight sets, contact Metav Werkzeuge to request the KERN 313-082-400 Plastic Case and consult our specialists at info@metav-werkzeuge.com or +49 2822 7131930 for tailored technical advice Technical data Article number: 313-082-400 Manufacturer: KERN GTIN: 4045761077942 Material: Plastic Origin: Germany Facts Suitable nominal values: 1 mg–5 kg Calibration classes: E1–M3 Product weight: 1.5 kg HS code: 84239090 ECLASS: 21100103 Special features For standard weight sets (button/compact design) Not suitable for cast weights Product group: Plastic cases / weight set cases Intended application: storage and transport of calibration weights FAQ What nominal weight range does the case support? The case supports standard nominal values from 1 mg to 5 kg and is intended for standard weight sets used in calibration. Is this case suitable for cast weights? No, the KERN 313-082-400 Plastic Case is explicitly not suitable for cast weights; it is intended for button and compact weight formats. Which calibration classes are compatible with this case? The case is compatible with calibration classes E1–M3, making it appropriate for high-precision and routine calibration sets. How heavy is the case itself? The case has a product weight of approximately 1.5 kg, offering a balance between protection and portability. Can the case be used in mobile calibration services? Yes, the lightweight and durable plastic construction makes the case practical for transport between sites while keeping weights organised and protected. Metav Werkzeuge, Emmerich am Rhein, Germany; info@metav-werkzeuge.com; +49 2822 7131930