1 g–2 kg Test Weight Set Knob Form Stainless Steel, Aluminium Case, OIML F2 - KERN
€940.00
Product information "1 g–2 kg Test Weight Set Knob Form Stainless Steel, Aluminium Case, OIML F2 - KERN"
Take advantage of the combination of OIML Class F2 conformity, a comprehensive 1 g–2 kg weight range and fine‑turned stainless steel construction for dependable calibration results; order the set directly via Metav Werkzeuge or ask the consultants for tailored verification advice.
KERN 334-076 weight set (OIML Class F2, 1 g–2 kg)
The KERN 334-076 weight set is a precision calibration kit for scales and balances, designed to support routine verification and quality assurance in laboratories and industrial workshops.
- OIML Class F2 accuracy
- Nominal range 1 g–2 kg
- Fine‑turned stainless steel construction
- Aluminium protective case
Consistent measurement confidence through certified accuracy
Calibration and verification hinge on repeatable, certified values. The set meets OIML Class F2, which signifies controlled tolerance levels suitable for many commercial and industrial weighing applications. This conformity supports documented traceability to recognised standards and reduces uncertainty in routine checks. Relying on certified weights simplifies audit preparation and ensures measured values remain comparable over time, a clear advantage for quality management and compliance.
Robust materials for long‑term stability and low maintenance
The individual weights are fine‑turned stainless steel, a finish that improves mass stability and resists surface degradation. Fine turning reduces machining marks that can trap contaminants and alter mass, while stainless steel minimises corrosion risk in workshop environments. The result is extended service life and fewer recalibration cycles, which translates into less downtime and lower lifecycle effort for metrology equipment.
Secure transport and practical handling for daily use
A compact aluminium case protects the complete set during storage and transport, helping to preserve the calibrated surfaces and to avoid accidental knocks. With a total set weight of around 5.15 kg and nominal values from 1 g–2 kg, the selection covers routine verification tasks without unnecessary bulk. Thoughtful design reduces handling errors: each piece is presented in button form for easy pick‑up and immediate use, supporting efficient calibration routines and consistent results.
For reliable calibration with KERN precision and OIML Class F2 conformity, contact Metav Werkzeuge in Emmerich to discuss availability and the best configuration for the required verification tasks
Technical Data
- Article number: 334-076
- Manufacturer: KERN
- GTIN: 4045761224438
- Origin: Germany
Facts
- Total set weight: 5.15 kg
- Nominal values: 1 g–2 kg
- Tariff code: 84239090
- eClass: 32120103
Special features
- OIML Class F2
- Fine‑turned stainless steel
- Button form (knopfform)
- Aluminium protective case
- Suitable for calibration of scales and balances
- Made in Germany
FAQ
What does OIML Class F2 mean for practical use?
OIML Class F2 indicates the set meets tolerance limits appropriate for many commercial and industrial calibrations; the KERN 334-076 weight set provides predictable deviation margins for reliable verification.
Can the weights be used in a production environment?
Yes, the KERN 334-076 weight set is designed for workshop and laboratory environments where routine calibration and verification of balances and scales are required.
How does the stainless steel finish affect performance?
The fine‑turned stainless steel finish of the KERN 334-076 reduces surface irregularities and corrosion risk, helping to maintain mass stability and extend recalibration intervals.
Is the set complete for common balance verifications?
The nominal range 1 g–2 kg in the KERN 334-076 covers a broad spectrum of routine verification tasks, making it suitable as a core set for many weighing instruments.
How should the weights be stored to preserve accuracy?
Store the weights in their aluminium protective case, avoiding humidity, strong magnetic fields and mechanical shocks; this preserves the calibrated condition of the KERN 334-076 weight set.
KERN · Germany · GTIN: 4045761224438
Zubehör
Take advantage of durable protection and workshop-ready compatibility: the robust aluminium shell preserves calibrated mass sets and is sized for 1 g–2 kg nominal values, covering classes E1–M2 for precise measurement routines. Order the Aluminium-protected case directly via Metav Werkzeuge or consult our advisors for application guidance. Aluminium-protected case 314-070-600 — for standard weight sets 1 g–2 kg, Classes E1–M2 (KERN) The Aluminium-protected case is a compact storage solution designed to carry and protect standard calibrated weight sets in a button/compact format, supporting nominal values from 1 g to 2 kg and calibration classes E1–M2 Aluminium-protected case construction Fits weight sets 1 g–2 kg (compact/button) Suitable for calibration classes E1–M2 Robust aluminium material, lightweight 1.4 kg Preserve measurement integrity with robust aluminium protection The aluminium shell offers a lightweight yet sturdy enclosure that helps maintain the condition of precision weights during transport and storage. By housing nominal values from 1 g–2 kg in a purpose-sized container, the system reduces handling complexity and the risk of accidental damage. This protective design supports reliable repeatability of calibration tasks in both bench-top laboratories and production environments, helping to reduce downtime associated with weight replacement or recalibration. Match the case to calibration requirements for consistent results The case is specified for calibration classes E1–M2, which spans high-accuracy reference weights to general workshop standards. Selecting a casing matched to the grade of the mass set prevents unnecessary exposure and supports traceable measurement routines. For users who manage several sets across different tolerance classes, the container keeps each set clearly associated with its declared class, simplifying inventory control and adherence to calibration schedules. Compact format and material benefits that support workshop workflow Engineered for compact/button-style weight sets, the enclosure balances protection with portability: at approximately 1.4 kg the case is easy to handle while providing a rigid aluminium barrier against shocks and environmental effects. The aluminium construction also contributes to long-term durability and low maintenance compared with softer housings. For procurement and logistics, a standardised case size reduces storage footprint and streamlines handling during calibration exchanges or mobile metrology operations. Contact Metav Werkzeuge in Emmerich for expert advice on KERN aluminium-protected cases (SKU 314-070-600) and to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 — assistance is available by email, phone or WhatsApp Technical data Article number: 314 SKU: 314-070-600 Manufacturer: KERN Material: Aluminium Facts Range: 1 g–2 kg Calibration classes: E1–M2 Case weight: 1.4 kg eClass: 21100103 Tariff number: 84239090 Origin: CN Special features Aluminium construction For button / compact weight designs Designed for standard calibrated mass sets FAQ What nominal weight range does the case accept? The aluminium-protected case accepts calibrated mass sets with nominal values from 1 g to 2 kg, accommodating compact and button-style designs. Which calibration classes are supported by this case? This storage solution is specified for calibration classes E1–M2, covering both high-precision reference weights and general workshop grades. Who manufactures the case and what is the SKU? The case is produced by KERN and is listed under SKU 314-070-600 for ordering and inventory purposes. How does the aluminium construction benefit workshop use? Aluminium provides a rigid, lightweight enclosure that reduces the likelihood of damage during handling and transport while remaining easy to manoeuvre in daily workflows. Is the case suitable for mobile calibration service? Yes, the compact format and moderate mass make it suitable for mobile calibration tasks where secure, standardised storage of mass sets is required. Manufacturer: KERN, Origin: CN