1 mg–1 kg Precision Weight Set, M1 Class, Button Style, Fine‑Turned Stainless Steel, Plastic Case - KERN
€530.00
Product information "1 mg–1 kg Precision Weight Set, M1 Class, Button Style, Fine‑Turned Stainless Steel, Plastic Case - KERN"
Take advantage of precise OIML M1 accuracy combined with robust, fine-turned stainless steel construction for dependable calibration results and efficient workflow protection. Order the set directly via Metav Werkzeuge or consult our specialists for specification alignment.
KERN 343-064 Weight Set (OIML M1, 1 mg–1 kg)
The KERN 343-064 weight set is a laboratory-grade calibration kit for scales and balances, designed to cover the range from 1 mg to 1 kg with button-shaped, finely turned stainless steel weights supplied in a protective plastic case.
- OIML class M1 certified accuracy
- Nominal range 1 mg–1 kg
- Fine-turned stainless steel weights
- Supplied in protective plastic case
Reliable metrology for routine calibration
Calibrations demand reproducible, standardised masses; the OIML M1 classification ensures this set meets widely recognised metrological tolerances for routine laboratory and industrial checks. The calibration kit covers the full span from microgram-scale checks up to kilogram-level verifications (1 mg–1 kg), enabling a single, organised solution for in-house verification of analytical and precision balances. The clear class designation reduces uncertainty in procurement decisions and supports consistent quality assurance across measurement workflows.
Durable materials that protect accuracy
Constructed from finely turned stainless steel, each weight combines dimensional precision with corrosion resistance, which minimises long-term drift and handling wear. The button-shaped form factor reduces the risk of edge damage and provides predictable contact points for typical forceps or tweezers used in calibration. These material and design choices translate into lower maintenance demands and longer intervals between recalibration, improving operational efficiency in busy metrology departments.
Organised storage to speed up processes
The set is supplied in a protective plastic case, with the milligram weights (1 mg–500 mg) stored separately in an inner plastic insert to prevent contact damage and cross-contamination. This arrangement supports fast, repeatable procedures during routine checks: technicians can access the required mass quickly while keeping smaller weights shielded. Clear organisation reduces handling time and the chance of misplacement, contributing to a smoother calibration routine in both laboratory and production environments.
Where this set performs best
This weight set is intended for calibration tasks in calibration laboratories, production quality control and educational metrology training where a reliable, compact solution is required. The combination of OIML M1 accuracy, a comprehensive 1 mg–1 kg range and corrosion-resistant stainless steel construction makes the set suitable for verifying analytical balances, precision scales and shop-floor test equipment. Its compact nature and case-based organisation also facilitate storage and controlled transport between test stations.
For precision from a trusted brand, consult Metav Werkzeuge in Emmerich for tailored advice on the KERN 343-064 weight set or to request additional technical details via info@metav-werkzeuge.com or +49 2822 7131930.
Technical data
- Article number: 343
- SKU: 343-064
- GTIN: 4045761007550
- Manufacturer: KERN
- Origin: DE
Facts
- Nominal value: 1 mg–1 kg
- OIML class: M1
- Total set weight: 3.7 kg
- Commodity code: 84239090
Special features
- Material: finely turned stainless steel
- Form: button shape
- Case material: plastic
- Milligram weights (1 mg–500 mg) in separate plastic insert
FAQ
What accuracy class does the set comply with?
The KERN 343-064 weight set complies with OIML M1 accuracy specifications, suitable for routine calibration and verification tasks.
Which mass range is included in the set?
The set covers a nominal range of 1 mg–1 kg, with milligram weights arranged separately for protected storage.
What materials are the weights made from?
Weights in the KERN 343-064 are made from finely turned stainless steel, chosen for stability and resistance to corrosion.
How are the smallest weights protected during storage?
The kit includes a protective plastic case and a separate inner plastic insert for milligram weights (1 mg–500 mg) to prevent contact damage.
Is the KERN 343-064 suitable for laboratory and shop-floor use?
Yes; the design and OIML M1 classification make this weight set appropriate for both laboratory calibration and routine quality-control checks on the shop floor.
Manufacturer: KERN — Germany. Distributor contact: Metav Werkzeuge, Emmerich — info@metav-werkzeuge.com, +49 2822 7131930
Zubehör
Take advantage of secure, lightweight storage that protects standard weight sets up to 5 kg, compatible with calibration classes E1–M3, and designed specifically for button and compact formats; order via Metav Werkzeuge or consult our specialists for guidance. KERN 313-082-400 Plastic Case — for standard weight sets up to 5 kg, E1–M3 A KERN 313-082-400 Plastic Case engineered to protect and organise standard weight sets (button/compact form) for calibration, laboratory and workshop use Plastic case for weight sets up to 5 kg Compatible with calibration classes E1–M3 Designed for button and compact weights Lightweight construction; easy transport Faster calibration workflows with protected storage The robust plastic case provides protected, organised storage for standard weight sets, supporting nominal values from 1 mg–5 kg and calibration classes E1–M3. By keeping weights secure and clearly arranged, routine checks and calibrations require less preparation time and handling, which increases throughput in busy calibration labs and testing environments. The case’s structured capacity reduces the risk of contamination and mechanical damage, helping maintain traceability and measurement reliability. Tailored layout for compact and button weights Designed for the specific format of button and compact weights, the internal layout is optimised to hold standard pieces securely during transport and storage. The solution is explicitly not suitable for cast weights, ensuring customers select the correct storage for precision masses rather than heavy, cast components. Clear compatibility with compact designs supports orderly handling and faster identification of required nominal values during set-up and inspections. Lightweight, durable design for easy handling With a total mass of approximately 1.5 kg, the case balances protection with portability: it is light enough for frequent movement between benches or labs yet durable enough to withstand day-to-day operational stress. The plastic construction offers resistance to moisture and common workshop contaminants, contributing to long service life and fewer replacements. Reduced handling weight also lessens manual strain and simplifies logistics for mobile calibration tasks. Compliance support and workshop efficiency Built to fit recognised weight class standards, this case assists in maintaining compliant storage for precision masses and supports efficient inventory management in industrial metrology. The German origin reinforces expectations for consistent manufacturing quality. When combined with a reliable ordering partner, this storage solution helps centralise supplies and reduces procurement complexity for calibration houses and workshops. For secure, compliant storage and practical handling of standard weight sets, contact Metav Werkzeuge to request the KERN 313-082-400 Plastic Case and consult our specialists at info@metav-werkzeuge.com or +49 2822 7131930 for tailored technical advice Technical data Article number: 313-082-400 Manufacturer: KERN GTIN: 4045761077942 Material: Plastic Origin: Germany Facts Suitable nominal values: 1 mg–5 kg Calibration classes: E1–M3 Product weight: 1.5 kg HS code: 84239090 ECLASS: 21100103 Special features For standard weight sets (button/compact design) Not suitable for cast weights Product group: Plastic cases / weight set cases Intended application: storage and transport of calibration weights FAQ What nominal weight range does the case support? The case supports standard nominal values from 1 mg to 5 kg and is intended for standard weight sets used in calibration. Is this case suitable for cast weights? No, the KERN 313-082-400 Plastic Case is explicitly not suitable for cast weights; it is intended for button and compact weight formats. Which calibration classes are compatible with this case? The case is compatible with calibration classes E1–M3, making it appropriate for high-precision and routine calibration sets. How heavy is the case itself? The case has a product weight of approximately 1.5 kg, offering a balance between protection and portability. Can the case be used in mobile calibration services? Yes, the lightweight and durable plastic construction makes the case practical for transport between sites while keeping weights organised and protected. Metav Werkzeuge, Emmerich am Rhein, Germany; info@metav-werkzeuge.com; +49 2822 7131930