1 mg–1 kg Test Weight Set Three-Point Button Stainless Steel Fine-Turned In Aluminium Case - KERN
€450.00
Product information "1 mg–1 kg Test Weight Set Three-Point Button Stainless Steel Fine-Turned In Aluminium Case - KERN"
Take advantage of precise calibration across a wide mass range and durable construction to streamline in-house checks; order the set directly via Metav Werkzeuge or ask our consultants for specification advice.
KERN 343-066 weight set — OIML Class M1, 1 mg–1 kg
the KERN 343-066 weight set is a precision calibration kit for balances and scales, covering 1 mg to 1 kg in a compact button-style format.
- OIML Class M1 accuracy
- Range 1 mg–1 kg in one set
- Fine‑turned stainless steel weights
- Supplied in robust aluminium case
Calibrate confidently with standardised accuracy
The set delivers OIML Class M1 performance, providing a dependable reference for routine calibration and verification of industrial and commercial weighing equipment. M1 class denotes a defined tolerance band that balances accuracy and practicality for production and workshop environments. With a single set covering 1 mg–1 kg, fewer swaps between weights are required, reducing handling time and the chance of error. The KERN 343-066 is therefore suited to scheduled checks, in‑process controls and quality assurance tasks where consistent, repeatable mass references are essential.
Durable materials and ergonomic handling reduce uncertainty
Each mass is fine‑turned stainless steel, a finish that resists corrosion and preserves nominal mass over repeated use. The weights are produced in a button form for reliable handling and minimal touch contact, helping to limit contamination and thermal transfer from operators’ hands. Smaller milligram weights are stored separately in a protective plastic case within the aluminium etui, ensuring organisation and safe access. The aluminium case provides robust transport protection and a clear layout for quick selection, supporting efficient working routines in busy workshops or calibration rooms.
Practical suitability and workflow benefits
This calibration kit is designed for routine use where traceable, repeatable mass values matter but extreme microgram tolerances are not required. The broad 1 mg–1 kg coverage reduces the need for multiple sets, saving storage space and simplifying inventory. Supplied as a complete set with clear organisation, it supports faster calibration cycles and fewer interruptions on the production floor. Originating from Germany and manufactured by KERN, the set aligns with established industrial expectations for consistency and build quality, making it a pragmatic choice for labs, maintenance teams and manufacturing quality departments.
Contact Metav Werkzeuge in Emmerich am Rhein for availability and expert procurement advice on the KERN 343-066 weight set — email info@metav-werkzeuge.com or call +49 2822 7131930
Technical data
- Article number: 343-066
- Manufacturer: KERN
- GTIN: 4045761224605
- Origin: DE
Facts
- Nominal value: 1 mg–1 kg
- Total set weight: 2.71 kg
- OIML class: M1
- Tariff number: 84239090
- ECLASS: 32120103
Special features
- Material: stainless steel, fine‑turned
- Case: aluminium etui
- Form: button form
- Milligram weights in separate plastic case
- Product category: Test weights (calibration weights)
FAQ
What accuracy class does this weight set conform to?
The KERN 343-066 weight set conforms to OIML Class M1, making it suitable for routine calibration and control tasks where M1 tolerances are accepted.
Which mass values are included in the set?
The set covers a nominal range from 1 mg to 1 kg, offering broad coverage for many calibration requirements in one compact kit.
What materials and packaging protect the weights?
Weights are fine‑turned stainless steel and supplied in an aluminium etui; the smallest milligram pieces are kept in a separate plastic case to prevent damage and ease handling.
Is this set suitable for laboratory balance verification?
The KERN 343-066 is appropriate for routine checks and verification of many laboratory and industrial balances that accept M1 class weights; for ultra‑high‑precision analytical balances, higher-accuracy classes may be required.
KERN — Germany; Metav Werkzeuge, Emmerich am Rhein; info@metav-werkzeuge.com; +49 2822 7131930
Zubehör
Take advantage of the combination of aluminium protection, compatibility with weight classes E1–M1 and the compact design for reliable storage and safe transport of calibration weights. Order the case directly via Metav Werkzeuge or consult our advisors for tailored guidance. KERN 313-060-600 Aluminium-protected case for standard weight sets (E1–M1, 1 mg–1 kg) The Aluminium-protected case 313-060-600 offers secure, transport-ready storage for standard calibration weight sets used in laboratories, calibration rooms and workshops. Aluminium-protected housing Compatible with weight classes E1–M1 Holds standard sets from 1 mg to 1 kg Button/compact format for organised storage Robust protection for precision weights The aluminium-protected outer shell provides a lightweight yet impact-resistant barrier, preserving the integrity of delicate calibration artefacts during transport and daily handling. Designed for standard mass sets, the case accommodates 1 mg–1 kg nominal values and supports the stringent tolerances required for classes E1–M1, reducing the risk of deformation or contamination that can affect measurement traceability. The solid construction combines low weight with high rigidity, making it a practical solution for laboratory technicians and service engineers who require dependable protection on the move. Organised interior that preserves accuracy A precisely cut foam insert and compact layout keep each weight in a defined position, preventing contact between items and ensuring quick identification and access. The internal arrangement suits the button/compact form factor of standard sets, enabling efficient inventory checks and fast preparation for calibration routines. By securing individual masses, the case minimises handling-related errors and accelerates daily workflows, which supports higher throughput without compromising measurement quality. Compliance support and operational continuity Compatibility with E1–M1 classes means the case is suitable for a wide range of precision applications, from national metrology labs to in-house quality assurance. The protective design assists in maintaining calibration status and simplifies storage in controlled environments. Manufactured by KERN, the solution aligns with professional requirements for traceability and repeatable performance, helping to safeguard assets that form the basis of accurate weighing results across production and inspection processes. Durable, compact and workshop-ready At approximately 0.8 kg, the housing remains easy to handle while offering durable protection suited to everyday industrial use. The aluminium material resists wear and supports long service life, reducing the need for frequent replacements and contributing to steady operational availability. For organisations aiming to consolidate suppliers and streamline equipment logistics, this case represents a practical component that complements a complete calibration toolkit. Contact Metav Werkzeuge in Emmerich for expert advice on integrating the KERN 313-060-600 aluminium-protected case into existing calibration procedures — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 313-060-600 Manufacturer: KERN GTIN: 4045761222793 Material: Aluminium Origin: CN Core numerical data Weight (case): 0.8 kg Nominal weights accommodated: 1 mg–1 kg Weight classes: E1–M1 Commodity code: 84239090 eClass: 21100103 Special features Aluminium-protected case for calibration weight sets Designed for button/compact format weights Suitable for classes E1–M1 and nominal range 1 mg–1 kg Compact, impact-resistant housing for transport and storage FAQ What weight range fits in the case? The aluminium-protected case is designed for nominal values from 1 mg to 1 kg and accommodates standard compact/button-format sets. Is the case suitable for E1 calibration weights? Yes, the case supports weights in classes E1–M1, making it appropriate for highest-precision sets requiring strict handling. How does the interior protect individual weights? A tailored foam insert secures each piece in its own recess, preventing contact and minimising handling-related deviations. Can the case be used for field transport to customer sites? The robust aluminium housing and compact design are intended to protect weights during transport between laboratories and on-site calibration visits. Who manufactures this case? KERN produces the aluminium-protected case 313-060-600 to support professional metrology and calibration workflows. KERN; Country of origin: CN; GTIN: 4045761222793