1 g–1 kg Precision Test Weight Set Knob Form Stainless Steel Fine-Turned In Plastic Case - KERN
€455.00
Product information "1 g–1 kg Precision Test Weight Set Knob Form Stainless Steel Fine-Turned In Plastic Case - KERN"
Benefit from precision and durability: OIML class M1 accuracy combined with fine-turned stainless steel construction ensures reliable calibration results and long-term corrosion resistance. The compact plastic case provides secure storage and organised handling for daily use. Order the KERN 344-064 weight set directly via Metav Werkzeuge or ask our consultants if needed.
KERN 344-064 Weight set (OIML class M1) — 1 g to 1 kg, fine‑turned stainless steel
A KERN 344-064 weight set designed for calibration and verification of laboratory and industrial scales, supplied as knob‑shaped masses in a protective plastic case
- OIML class M1 accuracy
- Nominal range 1 g to 1 kg
- Fine‑turned stainless steel construction
- Supplied in sturdy plastic case
Consistent measurement results for calibration tasks
The set delivers verifiable performance with OIML class M1 accuracy across the 1 g–1 kg range, making it suitable for precise balance calibration and routine verification. Using class‑rated reference masses reduces measurement uncertainty and supports repeatable test results on benchtop and floor scales. The clear nominal range and standard classification enable straightforward integration into existing quality workflows and documentation.
Built to withstand workshop and laboratory conditions
Manufactured from fine‑turned stainless steel, each knob‑shaped mass combines a smooth surface finish with mechanical stability to resist corrosion and wear. The knob form eases handling during transfers and minimises contact with sensitive surfaces, while the plastic case protects the set during storage and transport. This combination reduces the risk of contamination and mechanical damage, extending service life and lowering maintenance effort.
Traceability and practical application in daily workflows
For traceable calibration procedures and internal quality control, the set supports documented verification steps and routine checks. The compact design and clearly defined nominal values simplify inventory management and procedural planning. The robust construction and standard classification make the set a dependable choice for workshops, calibration labs and production environments that require consistent and reproducible measurement standards.
For specialist advice and delivery from Emmerich, contact Metav Werkzeuge and request the KERN 344-064 weight set with OIML class M1 accuracy by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930
Technical data
- SKU: 344-064
- Manufacturer: KERN
- GTIN: 4045761007970
- OIML class: M1
- Nominal values: 1 g–1 kg
- Form: Knob (button)
- Material: Fine‑turned stainless steel
- Case material: Plastic
- Total weight: 3.7 kg
- Country of origin: DE
- Tariff number: 84239090
Facts
- Nominal range: 1 g to 1 kg
- Article group: Weight sets / calibration masses
- Accuracy class: OIML M1
- Mass shape: Knob
- Package: Plastic case
- SKU: 344-064
Special features
- Fine‑turned stainless steel surface
- Knob‑shaped masses for easy handling
- Protective plastic case for storage and transport
- Suitable for calibration and verification tasks
FAQ
What accuracy class does the set comply with?
The KERN 344-064 weight set complies with OIML class M1, providing a standardised level of accuracy for calibration and verification procedures.
Which nominal values are included in the set?
The set covers nominal values from 1 g to 1 kg, allowing stepwise calibration across a wide practical range for laboratory and workshop balances.
What material are the masses made from?
The masses are made from fine‑turned stainless steel in a knob shape; the complete set is supplied in a protective plastic case for safe storage.
Is the set suitable for routine laboratory calibration?
Yes. With its M1 classification and robust stainless‑steel construction, the set is suitable for routine calibration and verification where M1 accuracy is required.
How should the masses be handled and stored?
Handle the masses with clean tweezers or gloves to avoid deposits; store them in the supplied plastic case to prevent contamination and mechanical damage.
Manufacturer: KERN, Address: Germany, Contact: info@metav-werkzeuge.com / +49 2822 7131930
Zubehör
Take advantage of secure, lightweight storage that protects standard weight sets up to 5 kg, compatible with calibration classes E1–M3, and designed specifically for button and compact formats; order via Metav Werkzeuge or consult our specialists for guidance. KERN 313-082-400 Plastic Case — for standard weight sets up to 5 kg, E1–M3 A KERN 313-082-400 Plastic Case engineered to protect and organise standard weight sets (button/compact form) for calibration, laboratory and workshop use Plastic case for weight sets up to 5 kg Compatible with calibration classes E1–M3 Designed for button and compact weights Lightweight construction; easy transport Faster calibration workflows with protected storage The robust plastic case provides protected, organised storage for standard weight sets, supporting nominal values from 1 mg–5 kg and calibration classes E1–M3. By keeping weights secure and clearly arranged, routine checks and calibrations require less preparation time and handling, which increases throughput in busy calibration labs and testing environments. The case’s structured capacity reduces the risk of contamination and mechanical damage, helping maintain traceability and measurement reliability. Tailored layout for compact and button weights Designed for the specific format of button and compact weights, the internal layout is optimised to hold standard pieces securely during transport and storage. The solution is explicitly not suitable for cast weights, ensuring customers select the correct storage for precision masses rather than heavy, cast components. Clear compatibility with compact designs supports orderly handling and faster identification of required nominal values during set-up and inspections. Lightweight, durable design for easy handling With a total mass of approximately 1.5 kg, the case balances protection with portability: it is light enough for frequent movement between benches or labs yet durable enough to withstand day-to-day operational stress. The plastic construction offers resistance to moisture and common workshop contaminants, contributing to long service life and fewer replacements. Reduced handling weight also lessens manual strain and simplifies logistics for mobile calibration tasks. Compliance support and workshop efficiency Built to fit recognised weight class standards, this case assists in maintaining compliant storage for precision masses and supports efficient inventory management in industrial metrology. The German origin reinforces expectations for consistent manufacturing quality. When combined with a reliable ordering partner, this storage solution helps centralise supplies and reduces procurement complexity for calibration houses and workshops. For secure, compliant storage and practical handling of standard weight sets, contact Metav Werkzeuge to request the KERN 313-082-400 Plastic Case and consult our specialists at info@metav-werkzeuge.com or +49 2822 7131930 for tailored technical advice Technical data Article number: 313-082-400 Manufacturer: KERN GTIN: 4045761077942 Material: Plastic Origin: Germany Facts Suitable nominal values: 1 mg–5 kg Calibration classes: E1–M3 Product weight: 1.5 kg HS code: 84239090 ECLASS: 21100103 Special features For standard weight sets (button/compact design) Not suitable for cast weights Product group: Plastic cases / weight set cases Intended application: storage and transport of calibration weights FAQ What nominal weight range does the case support? The case supports standard nominal values from 1 mg to 5 kg and is intended for standard weight sets used in calibration. Is this case suitable for cast weights? No, the KERN 313-082-400 Plastic Case is explicitly not suitable for cast weights; it is intended for button and compact weight formats. Which calibration classes are compatible with this case? The case is compatible with calibration classes E1–M3, making it appropriate for high-precision and routine calibration sets. How heavy is the case itself? The case has a product weight of approximately 1.5 kg, offering a balance between protection and portability. Can the case be used in mobile calibration services? Yes, the lightweight and durable plastic construction makes the case practical for transport between sites while keeping weights organised and protected. Metav Werkzeuge, Emmerich am Rhein, Germany; info@metav-werkzeuge.com; +49 2822 7131930