1 g Hook Weight OIML Class M1, Stainless Steel Turned, 1 mg Tolerance - KERN
€26.00
Product information "1 g Hook Weight OIML Class M1, Stainless Steel Turned, 1 mg Tolerance - KERN"
Take advantage of precise OIML M1 conformity and a finely turned stainless steel body for dependable calibration results; combine compact handling with robust material quality for uninterrupted measurement routines. Order the hook weight directly via Metav Werkzeuge or consult our specialists for application advice.
Hook weight – precision OIML M1, 1 g calibration weight by KERN
The Hook weight is a precision calibration mass designed for reliable adjustment and verification of hanging scales and small balances in industrial and laboratory environments.
- OIML class M1, nominal value 1 g
- Fine-turned stainless steel construction
- Designed as a hook weight for calibration
- Made in Germany
Stable accuracy that supports traceable measurements
The OIML M1 classification combined with a nominal value of 1 g and a declared tolerance of 1 mg ensures the mass standard meets recognised benchmarks for routine verification. This level of accuracy reduces measurement uncertainty during daily checks and supports audit trails when log entries are required. The calibration mass functions as a compact reference for quick checks, enabling predictable outcomes when adjusting weighing instruments.
Durable stainless steel body for long service life
Manufactured from fine-turned stainless steel, the calibration mass resists corrosion and surface wear that could otherwise alter mass over time. The turned finish minimises surface irregularities, which helps preserve the defined mass and reduces the need for frequent replacement. As a result, maintenance intervals are extended and operational reliability is increased, making the component suitable for workshops where physical handling is frequent.
Practical hook design for straightforward application
The hook-shaped format simplifies attachment to hanging scales and quick-check fixtures, reducing handling time and the risk of improper placement. This compact hook weight is especially useful for instruments that require a suspended test mass for calibration checks. The ergonomic shape assists technicians in performing fast, repeatable verifications while keeping the calibration process efficient and secure.
Documentation-friendly characteristics for quality systems
The mass is suited to environments where documentation and conformity matter: the OIML M1 designation and the clear numerical tolerance support recording in quality systems and calibration logs. Using a recognised class of calibration weight helps maintain consistency across multiple workstations and aids compliance with standard operating procedures during internal audits.
Small, robust asset that reduces downtime
As a single, easy-to-store test weight, the component occupies minimal space yet provides immediate functional value for routine checks. Its robustness and resistance to environmental influences make it a low-risk, cost‑efficient tool that helps prevent extended machine downtime caused by unverified instruments. The test mass is engineered to contribute to steady production flow through simple, repeatable verification.
Suitable for a range of industrial and lab tasks
The compact calibration weight is applicable in production lines, incoming inspection, and laboratory verification work where a hanging mass is required. Supplied by a reputable manufacturer, the item integrates into standard calibration routines and complements broader metrological setups, offering a practical balance between portability and conformity.
Contact Metav Werkzeuge for ordering or specification consultation regarding the KERN hook weight 347-016 and receive expert guidance from our Emmerich-based team
Technical Data
- Article number: 347
- SKU: 347-016
- GTIN: 4045761256149
- Manufacturer: KERN
Facts
- Nominal value: 1 g
- Tolerance (OIML): 1 mg
- OIML class: M1
- Cylinder dimensions: 6×6 mm
- Tariff number: 84239090
- Origin: DE
Special features
- Fine-turned stainless steel
- Hook weight design
- Single calibration mass
- OIML conformity
FAQ
What level of accuracy does this calibration weight offer?
The KERN hook weight 347-016 is OIML class M1 with a nominal value of 1 g and a tolerance of 1 mg, suitable for routine verification of small balances and hanging scales.
Can this weight be used on hanging scales and small balances?
Yes. The hook design of the KERN 347-016 makes it particularly suitable for hanging scales while it also serves as a compact test mass for small balances.
What material is the mass made from and why does that matter?
The mass is made from fine-turned stainless steel, which provides corrosion resistance and dimensional stability to maintain accuracy over repeated use.
Is the product suitable for use in quality-controlled environments?
The OIML M1 classification and declared tolerance allow the calibration mass to be recorded in calibration logs and quality documentation as part of standard verification procedures.
Where is the calibration weight manufactured?
The KERN hook weight 347-016 is made in Germany, reflecting the manufacturing origin indicated for this product.
Manufacturer: KERN, Germany
Zubehör
Take advantage of a compact, KERN-specified storage solution that protects individual calibration weights and keeps them organised for routine use; the combination of robust plastic construction, compatibility with 1 g–5 g knob/compact weights and straightforward handling ensures reliable daily workflow — order directly via Metav Werkzeuge or consult our team for product matching. Plastic case 347-030-400 — for individual calibration weights, 1 g–5 g, classes F1–M3 (KERN) The Plastic case 347-030-400 is a compact storage and transport solution for individual calibration weights, designed to keep knob/compact weights organised and protected in laboratories, workshops and service environments. Compact plastic case for individual weights Fits knob/compact weights 1 g–5 g Suitable for calibration classes F1–M3 Durable, lightweight storage solution Protects accuracy by preventing contamination and wear The case offers a secure place to store calibration weights so that surface contamination and handling damage are minimised, which in turn preserves measurement accuracy over time. By keeping knob and compact weights separated and secured, the storage solution reduces the need for frequent recalibration and helps maintain compliance with routine test intervals. This protective function is particularly relevant when handling sensitive classes such as F1–M3, where surface condition has a direct effect on measurement results. Lightweight plastic design for easy handling and transport Constructed from plastic, the case is both lightweight and durable, making movement between benches or job sites straightforward without adding significant bulk. Weighing approximately 0.02 kg, it supports convenient handling while providing a firm housing for individual pieces. The material choice balances protection with portability, offering a practical alternative to heavier metal cases where the primary requirement is safe short-term storage rather than long-term extreme environmental protection. Organises calibration workflows for faster selection and traceability A dedicated case reduces search times and streamlines the selection of the correct nominal weight during routine checks, improving operational efficiency in workshops and service departments. Clear organisation contributes to faster test cycles and less downtime, which in aggregate supports productivity goals. Where traceability is required, consistent storage in a defined case helps operators maintain an orderly inventory and reduces human error during weigh-ins and calibrations. Compatible with industry practice and a recognisable brand Designed for use with knob/compact weights in the 1 g–5 g range and suitable for classes F1–M3, the case aligns with common metrology practice and complements existing weight sets from established manufacturers. The KERN designation signals compatibility with professional weighing equipment; origin details indicate manufacturing standards consistent with European metrology supplies. As a simple yet effective accessory, the case supports routine maintenance of weights without introducing complex handling procedures. Contact Metav Werkzeuge for tailored advice on integrating the KERN plastic case 347-030-400 into workshop or laboratory inventory — email info@metav-werkzeuge.com or call +49 2822 7131930 for precise product matching and availability Technical Data Article number: 347-030-400 SKU: 347-030-400 GTIN: 4045761008663 Manufacturer: KERN Origin country: DE Material: Kunststoff Facts Weight (case): 0.02 kg ECLASS: 21100103 Tariff number: 84239090 Special features Case for individual weights Suitable for nominal values 1 g–5 g For calibration classes F1–M3 Designed for knob/compact weight form Category: Prüfgewichte (Waagen > Prüfgewichte) FAQ What weights fit this case? The Plastic case 347-030-400 fits individual knob/compact calibration weights with nominal values from 1 g–5 g, making it suitable for small weight sets. Is the case suitable for F1 and M3 class weights? Yes, the case is specified for use with weights in classes F1–M3, supporting common laboratory and workshop calibration needs. What material is the case made from and is it durable? The case is made of plastic, chosen to be both durable and lightweight, providing protection against contamination and handling wear during normal use. Can this case be used with weight sets from other manufacturers? The case is designed for knob/compact weight formats and will accommodate compatible 1 g–5 g pieces from other manufacturers if the form factor matches. Who supplies this product and how can it be obtained? This item is supplied by KERN and is available through Metav Werkzeuge; consult Metav for availability and compatibility advice Manufacturer: KERN · Address: Germany · Contact: info@metav-werkzeuge.com / +49 2822 7131930
Take advantage of a lightweight, polyamide handling tool that ensures a secure grip on small calibration weights up to 200 g; its 100 mm length combines fine control with easy handling for routine calibration tasks. Order directly via Metav Werkzeuge or consult our specialists for matching accessories and delivery from Emmerich. KERN 315-242 Tweezer (Polyamide, 100 mm) KERN 315-242 is a precision plastic tweezer for secure handling of small calibration weights in laboratories and workshops Secure grip for small calibration weights Suitable for weights E1–M3, 1 mg–200 g 100 mm length for precise handling Polyamide construction, lightweight 10 g Precision handling reduces contamination and measurement error The compact design provides a controlled hold when placing and removing calibration masses, helping to preserve the integrity of sensitive components. Made from polyamide, the instrument is gentle on metallic and plated surfaces and reduces risk of scratching or marking. The compatibility with 1 mg–200 g weights across E1–M3 classes means the tool supports a wide range of calibration workflows, supplying consistent handling where repeatability matters. Built for routine use, the tweezer contributes to faster setup times and fewer handling-related deviations. Comfortable length and light weight for repetitive tasks At 100 mm, the geometry balances reach and tactile feedback to enable precise positioning without overextension of the hand. The construction results in a lightweight tool — approximately 10 g — that decreases operator fatigue during repeated handling. The slim tips facilitate access to small masses and narrow pans, while the overall form factor supports careful handling during calibration runs. Clear, repeatable manipulation of weights improves throughput and aids adherence to internal quality procedures. Durable, easy-care design for laboratory and workshop environments The choice of high-quality plastic provides a durable and easy to clean solution suitable for environments where metal tweezers could risk scratching or produce magnetic influence. Maintenance is straightforward: wipe clean and store in a dry place to maintain tip alignment and performance. The tool's simple construction minimises service requirements and offers a dependable adjunct to balances, scales and precision measuring equipment in both calibration laboratories and industrial workshops. Contact Metav Werkzeuge today for tailored advice and supply of the KERN 315-242 tweezer; our Emmerich-based team can confirm suitability for specific calibration setups and arrange prompt delivery via the central European warehouse (info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271) Technical data Article number: 315 SKU: 315-242 Manufacturer: KERN GTIN: 4045761003439 Material: Polyamide (plastic) Facts Length: 100 mm Weight: 0.01 kg Suitable weight range: 1 mg–200 g Special features Secure grip for small calibration weights Suitable for weight classes E1–M3 Lightweight construction for reduced operator fatigue Simple cleaning and low maintenance FAQ What weight range is compatible with these tweezers? The KERN 315-242 tweezer is suitable for handling calibration weights from 1 mg up to 200 g. Which weight classes can be handled safely with this tool? This tweezer supports weights across classes E1 to M3, making it appropriate for a broad range of calibration tasks. Is the material safe for delicate or plated masses? Yes, the polyamide construction of the KERN 315-242 is designed to be gentle on delicate and plated surfaces, helping to avoid scratches. How should the tweezer be maintained to ensure longevity? Routine care for the KERN 315-242 involves simple cleaning with a soft cloth and storage in a dry place to preserve tip alignment and performance. Can this tool be used in both laboratory and workshop environments? The lightweight, easy-care design of the KERN 315-242 makes it suitable for calibration benches in laboratories as well as workshop settings where precise handling is required. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271